[Mon Mar 19 14:27:16 2012] Detection parameters:
  Position = (433.2, 260.2) = 18 19 53.30 -14 38 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.2 +/- 11.7
  Background counts = 26.2
  Rate = 0.007 +/- 0.001

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 10.16'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Mon Mar 19 14:30:24 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 11.51"
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src82.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src82.csv
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src82_1.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src82.csv
[Mon Mar 19 22:58:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon Mar 19 22:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:42 2012] Source 86 is offset by 4.876551 and -5.106438 pixels which is larger than
2 X fitted extent = 4.566258 x 4.566258, not incorporating fit results
[Tue Mar 20 15:36:42 2012] Spatial fit model total counts = 396.662000, observed total counts = 350.000000
[Tue Mar 20 15:36:42 2012] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 15:36:42 2012] Source 86 is offset by -3.395423 and 2.948676 pixels which is larger than
2 X fitted extent = 2.277384 x 2.277384, not incorporating fit results
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:36:42 2012] Source is confused with source 83
[Tue Mar 20 15:38:24 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Tue Mar 20 15:38:24 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 11.51"
[Wed Mar 21 00:51:08 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src78.ximg exists
[Wed Mar 21 00:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src78.csv
[Wed Mar 21 00:51:08 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src78_1.ximg exists
[Wed Mar 21 00:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src78.csv
[Wed Mar 21 00:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:51:13 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Wed Mar 21 00:51:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Wed Mar 21 00:51:13 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Wed Mar 21 00:51:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Wed Mar 21 00:51:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:47 2012] Spatial fit model total counts = 1182.610000, observed total counts = 1129.000000
[Wed Mar 21 18:09:47 2012] Offset between fit and detection position for source 86 = 0.770722 pixels
[Wed Mar 21 18:09:47 2012] Warning, changing simple spatial fit ID from 78 to 75
[Wed Mar 21 18:09:47 2012] 1156.083000 total counts/ 937.007000 bgd. counts: snr = 7.156874
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 0.770722 pixels
  Position = (432.6, 260.6) = 18 19 53.48 -14 38 32.4
  Extent = 25.2" x 3.2", rotation angle = 44
  Source counts = 219.1 +/- 34.0
  Background counts = 937.0
  Rate = 0.02 +/- 0.004
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 8.00
[Wed Mar 21 18:09:47 2012] Source is asymmetric
[Wed Mar 21 18:11:38 2012] XMMSAS src. selection expression = ellipse(37587.128269, 22628.009232, 1513.212044, 189.151205, 44.415273, X, Y)
[Wed Mar 21 18:11:38 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src86_src.reg
[Wed Mar 21 18:11:38 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (346, 174) - (520, 348)
[Wed Mar 21 18:11:38 2012] XMMSAS bgd. selection expression = annulus(37587.128269, 22628.009232, 2522.020073, 5044.040145, X, Y) && !ellipse(39539.776306, 18574.288345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39039.143600, 18821.314800, 371.286411, 371.286411, 0.000000, X, Y) && !ellipse(35811.979767, 28436.234039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.097000, 27090.408420, 1785.096051, 238.120007, 55.536200, X, Y) && !ellipse(36535.298000, 27442.944000, 1759.032051, 1759.032051, 0.000000, X, Y) && !ellipse(37470.847382, 26383.591064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.933624, 26374.038269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37796.934000, 25843.830000, 1799.560052, 1799.560052, 0.000000, X, Y) && !ellipse(38520.457458, 19217.747971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36136.995178, 25383.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34905.653656, 25473.051422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40601.201263, 25154.516937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38766.178000, 24884.536000, 732.378421, 732.378421, 0.000000, X, Y) && !ellipse(35900.832977, 24335.403229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39434.408200, 24243.803600, 1944.192056, 243.024007, 42.968000, X, Y) && !ellipse(37478.044000, 19994.776000, 1856.368053, 1856.368053, 0.000000, X, Y) && !ellipse(37692.258240, 23736.431274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36623.898346, 23522.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40517.509430, 23293.009521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37009.810000, 23095.676000, 1760.072051, 1760.072051, 0.000000, X, Y) && !ellipse(38697.500122, 22844.917572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39230.011383, 22411.388458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39561.882080, 22058.735519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38552.456000, 21768.454000, 243.304007, 243.304007, 0.000000, X, Y) && !ellipse(40016.111082, 21774.688908, 2263.960065, 282.995208, 217.575499, X, Y) && !ellipse(38936.577545, 21498.430084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40523.634583, 21461.264984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40038.057200, 20640.690800, 690.554420, 690.554420, 0.000000, X, Y) && !ellipse(37086.138800, 20375.211200, 1263.104036, 235.417607, 39.964000, X, Y) && !ellipse(33420.098389, 27617.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.736237, 26640.921814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.420624, 25764.632050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36540.421570, 24937.709900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36917.648132, 24504.427704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36349.408142, 23876.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.058075, 23459.825012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35118.594971, 22292.838745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36505.707062, 20863.868790, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 18:11:38 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src86.gif
[Wed Mar 21 19:33:16 2012] Mean detx,y = (10639.92, 4427.33) 
[Wed Mar 21 19:33:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 19:34:25 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 19:34:26 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Wed Mar 21 19:34:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Thu Mar 22 05:08:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:13 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Thu Mar 22 05:08:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:19 2012] Using photon index=1.80, rate=0.0234, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src86.arf
[Thu Mar 22 05:08:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:19 2012] Updating source flux to 1.2e-13
[Thu Mar 22 05:25:47 2012] Flag b found in src. 86 procflags, skipping spectral fitting
[Thu Mar 22 05:25:47 2012] Flag p found in src. 86 procflags, skipping spectral fitting
[Thu Mar 22 05:25:47 2012] Flag c found in src. 86 procflags, skipping spectral fitting