[Mon Mar 19 14:27:16 2012] Detection parameters:
  Position = (427.7, 266.0) = 18 19 54.93 -14 38 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.2 +/- 13.6
  Background counts = 26.7
  Rate = 0.02 +/- 0.003

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 9.67'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Mon Mar 19 14:30:24 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 11.26"
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src79.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src79.csv
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src79.csv
[Mon Mar 19 22:58:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Mar 19 22:58:38 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Tue Mar 20 15:36:42 2012] Spatial fit model total counts = 365.539000, observed total counts = 339.000000
[Tue Mar 20 15:36:42 2012] Offset between fit and detection position for source 83 = 1.865755 pixels
[Tue Mar 20 15:36:42 2012] Warning, changing simple spatial fit ID from 79 to 76
[Tue Mar 20 15:36:42 2012] 343.087800 total counts/ 291.083000 bgd. counts: snr = 3.048141
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 1.865755 pixels
  Position = (425.9, 266.3) = 18 19 55.48 -14 38 7.6
  Extent = 6.3 (4.2-10.4)", rotation angle = 0
  Source counts = 52.0 +/- 18.5
  Background counts = 291.1
  Rate = 0.006 +/- 0.002
[Tue Mar 20 15:36:42 2012] Spatial fit model total counts = 379.723000, observed total counts = 381.000000
[Tue Mar 20 15:36:42 2012] Offset between fit and detection position for source 83 = 0.206767 pixels
[Tue Mar 20 15:36:42 2012] Warning, changing simple spatial fit ID from 76 to 77
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.206767 pixels
  Position = (426.1, 266.2) = 18 19 55.43 -14 38 8.2
  Extent = 22.0 (19.5-44.0)", rotation angle = 0
  Source counts = 366.6 +/- 19.1
  Background counts = 0.0
  Rate = 0.04 +/- 0.002
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:36:42 2012] Source is confused with source 80
[Tue Mar 20 15:38:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 22.00"
[Tue Mar 20 15:38:24 2012] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.979
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 22.00"
[Wed Mar 21 00:51:08 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src75.ximg exists
[Wed Mar 21 00:51:08 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src75_1.ximg exists
[Wed Mar 21 00:51:08 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src75 appears to have run properly
[Wed Mar 21 00:51:13 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Wed Mar 21 00:51:13 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Wed Mar 21 00:51:13 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Wed Mar 21 18:09:47 2012] Spatial fit model total counts = 380.468000, observed total counts = 381.000000
[Wed Mar 21 18:09:47 2012] Offset between fit and detection position for source 83 = 0.227695 pixels
[Wed Mar 21 18:09:47 2012] Warning, changing simple spatial fit ID from 75 to 73
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.227695 pixels
  Position = (426.0, 266.0) = 18 19 55.47 -14 38 9.0
  Extent = 22.0 (21.9-44.0)", rotation angle = 0
  Source counts = 368.5 +/- 19.2
  Background counts = 0.0
  Rate = 0.04 +/- 0.002
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:11:38 2012] XMMSAS src. selection expression = ellipse(37009.810000, 23095.676000, 1320.054038, 1320.054038, 0.000000, X, Y)
[Wed Mar 21 18:11:38 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src83_src.reg
[Wed Mar 21 18:11:38 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (350, 190) - (502, 342)
[Wed Mar 21 18:11:38 2012] XMMSAS bgd. selection expression = annulus(37009.810000, 23095.676000, 2200.090063, 4400.180127, X, Y) && !ellipse(39539.776306, 18574.288345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39039.143600, 18821.314800, 371.286411, 371.286411, 0.000000, X, Y) && !ellipse(33756.097000, 27090.408420, 1785.096051, 238.120007, 55.536200, X, Y) && !ellipse(36535.298000, 27442.944000, 1759.032051, 1759.032051, 0.000000, X, Y) && !ellipse(37470.847382, 26383.591064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.933624, 26374.038269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37796.934000, 25843.830000, 1799.560052, 1799.560052, 0.000000, X, Y) && !ellipse(38520.457458, 19217.747971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36136.995178, 25383.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34905.653656, 25473.051422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40601.201263, 25154.516937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38766.178000, 24884.536000, 732.378421, 732.378421, 0.000000, X, Y) && !ellipse(35900.832977, 24335.403229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39434.408200, 24243.803600, 1944.192056, 243.024007, 42.968000, X, Y) && !ellipse(37478.044000, 19994.776000, 1856.368053, 1856.368053, 0.000000, X, Y) && !ellipse(37692.258240, 23736.431274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36623.898346, 23522.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40517.509430, 23293.009521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38697.500122, 22844.917572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37587.128269, 22628.009232, 2017.616058, 252.201607, 44.415273, X, Y) && !ellipse(39230.011383, 22411.388458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39561.882080, 22058.735519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38552.456000, 21768.454000, 243.304007, 243.304007, 0.000000, X, Y) && !ellipse(40016.111082, 21774.688908, 2263.960065, 282.995208, 217.575499, X, Y) && !ellipse(38936.577545, 21498.430084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40523.634583, 21461.264984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40038.057200, 20640.690800, 690.554420, 690.554420, 0.000000, X, Y) && !ellipse(37086.138800, 20375.211200, 1263.104036, 235.417607, 39.964000, X, Y) && !ellipse(33420.098389, 27617.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.736237, 26640.921814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.420624, 25764.632050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36540.421570, 24937.709900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36917.648132, 24504.427704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36349.408142, 23876.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.058075, 23459.825012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35118.594971, 22292.838745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36505.707062, 20863.868790, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 18:11:38 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src83.gif
[Wed Mar 21 19:30:15 2012] Mean detx,y = (10213.45, 3761.69) 
[Wed Mar 21 19:30:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 19:31:14 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 19:31:14 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Wed Mar 21 19:31:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Thu Mar 22 05:08:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:13 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Thu Mar 22 05:08:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:19 2012] Using photon index=1.80, rate=0.0394, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src83.arf
[Thu Mar 22 05:08:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:19 2012] Updating source flux to 1.5e-13
[Thu Mar 22 05:25:47 2012] Flag c found in src. 83 procflags, skipping spectral fitting