[Mon Mar 19 14:27:15 2012] Detection parameters:
  Position = (413.2, 280.3) = 18 19 59.29 -14 37 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.6 +/- 11.2
  Background counts = 27.8
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 8.42'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Mon Mar 19 14:30:24 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.778
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 10.64"
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src72.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src72.csv
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src72.csv
[Mon Mar 19 22:58:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon Mar 19 22:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:42 2012] Source 76 is offset by 7.043643 and -2.892331 pixels which is larger than
2 X fitted extent = 1.229117 x 1.229117, not incorporating fit results
[Tue Mar 20 15:36:42 2012] Spatial fit model total counts = 354.623000, observed total counts = 321.000000
[Tue Mar 20 15:36:42 2012] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:36:42 2012] Source is confused with source 117
[Tue Mar 20 15:38:24 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Tue Mar 20 15:38:24 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.778
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 10.64"
[Wed Mar 21 00:51:07 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src68.ximg exists
[Wed Mar 21 00:51:07 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src68_1.ximg exists
[Wed Mar 21 00:51:07 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src68 appears to have run properly
[Wed Mar 21 00:51:12 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Wed Mar 21 00:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Wed Mar 21 00:51:12 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Wed Mar 21 00:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Wed Mar 21 00:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:47 2012] Source 76 is offset by 2.850724 and -4.365250 pixels which is larger than
2 X fitted extent = 1.170000 x 1.170000, not incorporating fit results
[Wed Mar 21 18:09:47 2012] Warning, spatial fit 68 centroid is now closest to src. 117
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:11:37 2012] XMMSAS src. selection expression = ellipse(35900.832977, 24335.403229, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 18:11:37 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src76_src.reg
[Wed Mar 21 18:11:37 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (376, 243) - (451, 318)
[Wed Mar 21 18:11:37 2012] XMMSAS bgd. selection expression = annulus(35900.832977, 24335.403229, 1087.500000, 2175.000000, X, Y) && !ellipse(33756.097000, 27090.408420, 1785.096051, 238.120007, 55.536200, X, Y) && !ellipse(36535.298000, 27442.944000, 1759.032051, 1759.032051, 0.000000, X, Y) && !ellipse(37470.847382, 26383.591064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.933624, 26374.038269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37796.934000, 25843.830000, 1799.560052, 1799.560052, 0.000000, X, Y) && !ellipse(36136.995178, 25383.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34905.653656, 25473.051422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38766.178000, 24884.536000, 732.378421, 732.378421, 0.000000, X, Y) && !ellipse(39434.408200, 24243.803600, 1944.192056, 243.024007, 42.968000, X, Y) && !ellipse(37692.258240, 23736.431274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36623.898346, 23522.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37009.810000, 23095.676000, 1760.072051, 1760.072051, 0.000000, X, Y) && !ellipse(38697.500122, 22844.917572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37587.128269, 22628.009232, 2017.616058, 252.201607, 44.415273, X, Y) && !ellipse(40016.111082, 21774.688908, 2263.960065, 282.995208, 217.575499, X, Y) && !ellipse(38936.577545, 21498.430084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.736237, 26640.921814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36540.421570, 24937.709900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36917.648132, 24504.427704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36349.408142, 23876.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.058075, 23459.825012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35118.594971, 22292.838745, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 18:11:37 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src76.gif
[Wed Mar 21 19:23:32 2012] Mean detx,y = (9101.12, 2719.76) 
[Wed Mar 21 19:23:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 19:24:02 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 19:24:03 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Wed Mar 21 19:24:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Wed Mar 21 22:05:21 2012] Not generating rmf since there are only 61 counts
[Wed Mar 21 22:05:21 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:13 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Mar 22 05:08:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:19 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src76.arf
[Thu Mar 22 05:08:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:19 2012] Updating source flux to 4.7e-14
[Thu Mar 22 05:25:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting