[Mon Mar 19 14:27:14 2012] Detection parameters:
  Position = (438.4, 295.7) = 18 19 51.75 -14 36 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 11.5
  Background counts = 21.3
  Rate = 0.008 +/- 0.001

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 10.15'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Mon Mar 19 14:30:24 2012] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.759
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 11.50"
[Mon Mar 19 22:58:34 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src66.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src66.csv
[Mon Mar 19 22:58:35 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src66_1.ximg exists
[Mon Mar 19 22:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src66.csv
[Mon Mar 19 22:58:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Mon Mar 19 22:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:42 2012] Spatial fit model total counts = 364.111000, observed total counts = 355.000000
[Tue Mar 20 15:36:42 2012] Offset between fit and detection position for source 70 = 3.787374 pixels
[Tue Mar 20 15:36:42 2012] Warning, changing simple spatial fit ID from 66 to 64
[Tue Mar 20 15:36:42 2012] 367.571000 total counts/ 111.531000 bgd. counts: snr = 24.244321
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 3.787374 pixels
  Position = (435.1, 297.6) = 18 19 52.73 -14 35 51.6
  Extent = 22.5 (22.4-22.5)", rotation angle = 0
  Source counts = 256.0 +/- 19.2
  Background counts = 111.5
  Rate = 0.03 +/- 0.002
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:36:42 2012] Source is confused with source 67
[Tue Mar 20 15:38:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 22.46"
[Tue Mar 20 15:38:24 2012] source mask rpix=5.2, npix_max = 128, mask sum = 121, frac = 0.943
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 22.46"
[Wed Mar 21 00:51:07 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src62.ximg exists
[Wed Mar 21 00:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src62.csv
[Wed Mar 21 00:51:07 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src62_1.ximg exists
[Wed Mar 21 00:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src62.csv
[Wed Mar 21 00:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:51:12 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Wed Mar 21 00:51:12 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Wed Mar 21 00:51:12 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Wed Mar 21 18:09:47 2012] Spatial fit model total counts = 363.306000, observed total counts = 355.000000
[Wed Mar 21 18:09:47 2012] Offset between fit and detection position for source 70 = 0.120658 pixels
[Wed Mar 21 18:09:47 2012] Warning, changing simple spatial fit ID from 62 to 60
[Wed Mar 21 18:09:47 2012] 368.017000 total counts/ 100.975000 bgd. counts: snr = 26.574961
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.120658 pixels
  Position = (435.0, 297.6) = 18 19 52.76 -14 35 51.6
  Extent = 22.5 (22.5-45.0)", rotation angle = 0
  Source counts = 267.0 +/- 19.2
  Background counts = 101.0
  Rate = 0.03 +/- 0.002
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:11:36 2012] XMMSAS src. selection expression = ellipse(37796.934000, 25843.830000, 1349.670039, 1349.670039, 0.000000, X, Y)
[Wed Mar 21 18:11:36 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src70_src.reg
[Wed Mar 21 18:11:36 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (357, 220) - (513, 375)
[Wed Mar 21 18:11:36 2012] XMMSAS bgd. selection expression = annulus(37796.934000, 25843.830000, 2249.450065, 4498.900129, X, Y) && !ellipse(34140.379920, 31626.277600, 1697.464049, 246.080807, 244.038000, X, Y) && !ellipse(34632.472382, 30657.489960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35210.063385, 29602.511414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32765.341400, 28691.066000, 860.512025, 860.512025, 0.000000, X, Y) && !ellipse(33866.090210, 28565.220673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35811.979767, 28436.234039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.097000, 27090.408420, 1785.096051, 238.120007, 55.536200, X, Y) && !ellipse(36535.298000, 27442.944000, 1759.032051, 1759.032051, 0.000000, X, Y) && !ellipse(37470.847382, 26383.591064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.933624, 26374.038269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36136.995178, 25383.154785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34905.653656, 25473.051422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40601.201263, 25154.516937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38766.178000, 24884.536000, 732.378421, 732.378421, 0.000000, X, Y) && !ellipse(35900.832977, 24335.403229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39434.408200, 24243.803600, 1944.192056, 243.024007, 42.968000, X, Y) && !ellipse(37478.044000, 19994.776000, 1856.368053, 1856.368053, 0.000000, X, Y) && !ellipse(37692.258240, 23736.431274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36623.898346, 23522.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40517.509430, 23293.009521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37009.810000, 23095.676000, 1760.072051, 1760.072051, 0.000000, X, Y) && !ellipse(38697.500122, 22844.917572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37587.128269, 22628.009232, 2017.616058, 252.201607, 44.415273, X, Y) && !ellipse(39230.011383, 22411.388458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39561.882080, 22058.735519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38552.456000, 21768.454000, 243.304007, 243.304007, 0.000000, X, Y) && !ellipse(40016.111082, 21774.688908, 2263.960065, 282.995208, 217.575499, X, Y) && !ellipse(38936.577545, 21498.430084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40523.634583, 21461.264984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37086.138800, 20375.211200, 1263.104036, 235.417607, 39.964000, X, Y) && !ellipse(34502.017840, 30887.985200, 1718.064049, 225.951207, 64.003000, X, Y) && !ellipse(34838.283400, 30218.354600, 1573.312045, 206.016806, 61.884000, X, Y) && !ellipse(33102.466614, 29726.235779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33375.817810, 29248.731415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33420.098389, 27617.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.736237, 26640.921814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36540.421570, 24937.709900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36917.648132, 24504.427704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36349.408142, 23876.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.058075, 23459.825012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35118.594971, 22292.838745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36505.707062, 20863.868790, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 18:11:36 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src70.gif
[Wed Mar 21 19:17:51 2012] Mean detx,y = (10730.41, 1038.25) 
[Wed Mar 21 19:17:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 19:19:13 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 19:19:14 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed Mar 21 19:19:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Thu Mar 22 05:08:12 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Thu Mar 22 05:08:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:18 2012] Using photon index=1.80, rate=0.0286, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src70.arf
[Thu Mar 22 05:08:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:19 2012] Updating source flux to 1.1e-13
[Thu Mar 22 05:25:47 2012] Flag c found in src. 70 procflags, skipping spectral fitting