[Mon Mar 19 14:27:13 2012] Detection parameters:
  Position = (389.8, 328.9) = 18 20 6.31 -14 33 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.7 +/- 12.2
  Background counts = 24.5
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 6.98'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Mon Mar 19 14:30:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.938
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 9.92"
[Mon Mar 19 22:58:34 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src60.ximg exists
[Mon Mar 19 22:58:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src60.csv
[Mon Mar 19 22:58:34 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src60_1.ximg exists
[Mon Mar 19 22:58:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src60.csv
[Mon Mar 19 22:58:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Mon Mar 19 22:58:38 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Mon Mar 19 22:58:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Mon Mar 19 22:58:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:42 2012] Source 63 is offset by 3.092343 and -3.374050 pixels which is larger than
2 X fitted extent = 1.166924 x 9.122253, not incorporating fit results
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:38:24 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar 20 15:38:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.938
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 9.92"
[Wed Mar 21 00:51:07 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src57.ximg exists
[Wed Mar 21 00:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src57.csv
[Wed Mar 21 00:51:07 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed Mar 21 00:51:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src57.csv
[Wed Mar 21 00:51:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:51:12 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed Mar 21 00:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed Mar 21 00:51:12 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Mar 21 00:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed Mar 21 00:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:47 2012] Warning, spatial fit 57 centroid is now closest to src. 106
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:11:35 2012] XMMSAS src. selection expression = ellipse(33866.090210, 28565.220673, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 18:11:35 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src63_src.reg
[Wed Mar 21 18:11:35 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (352, 291) - (427, 366)
[Wed Mar 21 18:11:36 2012] XMMSAS bgd. selection expression = annulus(33866.090210, 28565.220673, 1087.500000, 2175.000000, X, Y) && !ellipse(31361.291800, 31453.231000, 1712.176049, 214.022406, 67.014600, X, Y) && !ellipse(34140.379920, 31626.277600, 1697.464049, 246.080807, 244.038000, X, Y) && !ellipse(32390.799286, 31183.594635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34632.472382, 30657.489960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32830.878760, 30247.587000, 414.104012, 414.104012, 0.000000, X, Y) && !ellipse(35210.063385, 29602.511414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32765.341400, 28691.066000, 860.512025, 860.512025, 0.000000, X, Y) && !ellipse(35811.979767, 28436.234039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.097000, 27090.408420, 1785.096051, 238.120007, 55.536200, X, Y) && !ellipse(36535.298000, 27442.944000, 1759.032051, 1759.032051, 0.000000, X, Y) && !ellipse(34272.933624, 26374.038269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37796.934000, 25843.830000, 1799.560052, 1799.560052, 0.000000, X, Y) && !ellipse(34502.017840, 30887.985200, 1718.064049, 225.951207, 64.003000, X, Y) && !ellipse(31483.841200, 31165.306820, 1456.880042, 197.771206, 68.150000, X, Y) && !ellipse(31845.376617, 30403.682434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34838.283400, 30218.354600, 1573.312045, 206.016806, 61.884000, X, Y) && !ellipse(33102.466614, 29726.235779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33375.817810, 29248.731415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.205322, 27791.165466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33420.098389, 27617.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31579.605530, 26982.921448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.736237, 26640.921814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.420624, 25764.632050, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 18:11:36 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src63.gif
[Wed Mar 21 19:11:22 2012] Mean detx,y = (6730.87, -1523.11) 
[Wed Mar 21 19:11:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 19:12:00 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 19:12:01 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Mar 21 19:12:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Wed Mar 21 21:51:59 2012] Not generating rmf since there are only 71 counts
[Wed Mar 21 21:51:59 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:12 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Mar 22 05:08:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:18 2012] Using photon index=1.80, rate=0.0137, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src63.arf
[Thu Mar 22 05:08:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:18 2012] Updating source flux to 5e-14
[Thu Mar 22 05:25:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting