[Mon Mar 19 14:27:08 2012] Detection parameters:
  Position = (372.7, 431.0) = 18 20 11.45 -14 26 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 12.0
  Background counts = 13.1
  Rate = 0.007 +/- 0.001

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 11.01'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Mon Mar 19 14:30:24 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.998
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.94"
[Mon Mar 19 22:58:33 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src25.ximg exists
[Mon Mar 19 22:58:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src25.csv
[Mon Mar 19 22:58:33 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Mar 19 22:58:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src25.csv
[Mon Mar 19 22:58:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:37 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Mar 19 22:58:37 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Mar 19 22:58:37 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Mar 20 15:36:42 2012] Spatial fit model total counts = 265.847000, observed total counts = 267.000000
[Tue Mar 20 15:36:42 2012] Offset between fit and detection position for source 27 = 2.817021 pixels
[Tue Mar 20 15:36:42 2012] 254.521100 total counts/ 95.048100 bgd. counts: snr = 16.357444
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.817021 pixels
  Position = (372.7, 428.2) = 18 20 11.44 -14 26 23.9
  Extent = 15.4 (11.0-21.6)", rotation angle = 0
  Source counts = 159.5 +/- 16.0
  Background counts = 95.0
  Rate = 0.02 +/- 0.002
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:36:42 2012] Source is confused with source 29
[Tue Mar 20 15:38:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 15.36"
[Tue Mar 20 15:38:24 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.984
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 15.36"
[Wed Mar 21 00:51:06 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src23.ximg exists
[Wed Mar 21 00:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src23.csv
[Wed Mar 21 00:51:06 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Mar 21 00:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src23.csv
[Wed Mar 21 00:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:51:10 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Mar 21 00:51:10 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Mar 21 00:51:10 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Mar 21 18:09:47 2012] Warning, spatial fit 23 centroid is now closest to src. 30
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:11:32 2012] XMMSAS src. selection expression = ellipse(32378.396800, 37201.078000, 921.756027, 921.756027, 0.000000, X, Y)
[Wed Mar 21 18:11:32 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src27_src.reg
[Wed Mar 21 18:11:32 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (320, 375) - (426, 481)
[Wed Mar 21 18:11:32 2012] XMMSAS bgd. selection expression = annulus(32378.396800, 37201.078000, 1536.260044, 3072.520088, X, Y) && !ellipse(31297.435600, 34953.839800, 563.186416, 563.186416, 0.000000, X, Y) && !ellipse(32025.096440, 42003.849200, 2179.776063, 272.472008, 90.916507, X, Y) && !ellipse(29447.551600, 42033.185800, 2131.072061, 266.384008, 91.430620, X, Y) && !ellipse(32021.909871, 41908.105417, 2131.072061, 266.384008, 90.855286, X, Y) && !ellipse(29430.467200, 40383.065400, 630.631218, 630.631218, 0.000000, X, Y) && !ellipse(29888.083710, 36322.908295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32550.094098, 36399.090403, 2057.616059, 257.201607, 77.502563, X, Y) && !ellipse(30741.096832, 35755.504639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32860.040023, 35184.735679, 2057.616059, 257.201607, 75.498646, X, Y) && !ellipse(29989.694336, 35974.754303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28615.838806, 35195.689056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.341461, 35112.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.341217, 34930.942810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33095.680400, 34408.722000, 406.316812, 406.316812, 0.000000, X, Y) && !ellipse(31431.932525, 33551.261061, 969.696028, 177.141234, 70.947314, X, Y) && !ellipse(33280.777400, 33770.680000, 484.847214, 484.847214, 0.000000, X, Y) && !ellipse(31486.493019, 33400.066138, 1561.024045, 195.128006, 69.706233, X, Y) && !ellipse(29026.670340, 33210.490600, 1561.024045, 270.656808, 74.738000, X, Y) && !ellipse(28727.397827, 34587.836029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.146296, 32418.344392, 1718.064049, 333.780131, 68.642088, X, Y)
[Wed Mar 21 18:11:32 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src27.gif
[Wed Mar 21 18:37:38 2012] Mean detx,y = (4998.70, -9956.27) 
[Wed Mar 21 18:37:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 18:38:28 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 18:38:28 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Mar 21 18:38:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Mar 22 05:08:10 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:10 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Mar 22 05:08:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:16 2012] Using photon index=1.80, rate=0.0171, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src27.arf
[Thu Mar 22 05:08:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:16 2012] Updating source flux to 8.1e-14
[Thu Mar 22 05:25:47 2012] Flag c found in src. 27 procflags, skipping spectral fitting