[Mon Mar 19 14:27:06 2012] Detection parameters:
  Position = (348.6, 482.8) = 18 20 18.68 -14 22 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.1 +/- 10.9
  Background counts = 15.7
  Rate = 0.006 +/- 0.001

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 13.85'
[Mon Mar 19 14:30:24 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:24 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Mon Mar 19 14:30:24 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Mon Mar 19 14:30:24 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.35"
[Mon Mar 19 22:58:33 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src12.ximg exists
[Mon Mar 19 22:58:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src12.csv
[Mon Mar 19 22:58:33 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Mar 19 22:58:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src12.csv
[Mon Mar 19 22:58:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:36 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Mar 19 22:58:37 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Mar 19 22:58:37 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Mar 20 15:36:42 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Tue Mar 20 15:36:42 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.169824 pixels away
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:38:24 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Tue Mar 20 15:38:24 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.35"
[Wed Mar 21 00:51:06 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Mar 21 00:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src11.csv
[Wed Mar 21 00:51:06 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Mar 21 00:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src11.csv
[Wed Mar 21 00:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:51:10 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Mar 21 00:51:10 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Mar 21 00:51:10 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Mar 21 18:09:47 2012] Source 14 is offset by -6.949465 and -2.760012 pixels which is larger than
2 X fitted extent = 1.620993 x 1.620993, not incorporating fit results
[Wed Mar 21 18:09:47 2012] Warning, spatial fit 11 centroid is now closest to src. 18
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:09:47 2012] Source is confused with source 13
[Wed Mar 21 18:11:31 2012] XMMSAS src. selection expression = ellipse(30278.184509, 41952.666931, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 18:11:31 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src14_src.reg
[Wed Mar 21 18:11:31 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (311, 445) - (386, 520)
[Wed Mar 21 18:11:32 2012] XMMSAS bgd. selection expression = annulus(30278.184509, 41952.666931, 1087.500000, 2175.000000, X, Y) && !ellipse(27923.508057, 39939.262634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32059.005585, 43278.450500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30341.934418, 43454.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29557.490082, 43523.934509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.791260, 42768.591949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30245.680000, 42637.623000, 648.047219, 648.047219, 0.000000, X, Y) && !ellipse(32025.096440, 42003.849200, 2179.776063, 272.472008, 90.916507, X, Y) && !ellipse(29447.551600, 42033.185800, 2131.072061, 266.384008, 91.430620, X, Y) && !ellipse(32949.762604, 41625.734589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32021.909871, 41908.105417, 2131.072061, 266.384008, 90.855286, X, Y) && !ellipse(28249.946564, 40882.767120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29430.467200, 40383.065400, 630.631218, 630.631218, 0.000000, X, Y)
[Wed Mar 21 18:11:32 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src14.gif
[Wed Mar 21 18:27:11 2012] Mean detx,y = (2587.20, -14675.66) 
[Wed Mar 21 18:27:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 18:27:48 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 18:27:49 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Mar 21 18:27:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Mar 21 21:11:59 2012] Not generating rmf since there are only 59 counts
[Wed Mar 21 21:11:59 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:09 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:09 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Mar 22 05:08:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:16 2012] Using photon index=1.80, rate=0.00632, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src14.arf
[Thu Mar 22 05:08:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:16 2012] Updating source flux to 4.4e-14
[Thu Mar 22 05:25:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting