[Mon Mar 19 14:27:18 2012] Detection parameters:
  Position = (366.6, 350.0) = 18 20 13.27 -14 32 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 12.5
  Background counts = 25.2
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:19 2012] Off-axis axis estimate = 6.20'
[Mon Mar 19 14:30:25 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 14:30:25 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Mon Mar 19 14:30:25 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Mon Mar 19 14:30:25 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 9.53"
[Mon Mar 19 22:58:36 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src100.ximg exists
[Mon Mar 19 22:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src100.csv
[Mon Mar 19 22:58:36 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src100_1.ximg exists
[Mon Mar 19 22:58:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src100.csv
[Mon Mar 19 22:58:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 19 22:58:39 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Mon Mar 19 22:58:39 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Mon Mar 19 22:58:39 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Tue Mar 20 15:36:42 2012] Source 104 is offset by 2.627892 and -3.275972 pixels which is larger than
2 X fitted extent = 1.908060 x 1.908060, not incorporating fit results
[Tue Mar 20 15:36:42 2012] Warning, spatial fit 100 centroid is now closest to src. 107
[Tue Mar 20 15:36:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:36:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:36:42 2012] Assessing source extent using major
[Tue Mar 20 15:36:42 2012] Source does appear to be extended
[Tue Mar 20 15:36:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:36:42 2012] Source is confused with source 54
[Tue Mar 20 15:38:24 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 15:38:24 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Tue Mar 20 15:38:24 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Tue Mar 20 15:38:24 2012] Giving source the simple spatial ID 96 for pass 1, mean size = 9.53"
[Wed Mar 21 00:51:09 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src96.ximg exists
[Wed Mar 21 00:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src96.csv
[Wed Mar 21 00:51:09 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src96_1.ximg exists
[Wed Mar 21 00:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src96.csv
[Wed Mar 21 00:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 00:51:14 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Wed Mar 21 00:51:14 2012] fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Wed Mar 21 00:51:14 2012] Fit fullrun_pn_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src96 appears to have run properly
[Wed Mar 21 18:09:47 2012] Source 104 is offset by 2.700467 and -3.279995 pixels which is larger than
2 X fitted extent = 1.912051 x 1.912051, not incorporating fit results
[Wed Mar 21 18:09:47 2012] Warning, spatial fit 96 centroid is now closest to src. 57
[Wed Mar 21 18:09:47 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:09:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:09:47 2012] Assessing source extent using major
[Wed Mar 21 18:09:47 2012] Source does appear to be extended
[Wed Mar 21 18:09:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:11:40 2012] XMMSAS src. selection expression = ellipse(31845.376617, 30403.682434, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 18:11:40 2012] Writing source region out to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src104_src.reg
[Wed Mar 21 18:11:40 2012] Extracting stamp from image fullrun_pn_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (329, 313) - (404, 388)
[Wed Mar 21 18:11:40 2012] XMMSAS bgd. selection expression = annulus(31845.376617, 30403.682434, 1087.500000, 2175.000000, X, Y) && !ellipse(31486.493019, 33400.066138, 1561.024045, 195.128006, 69.706233, X, Y) && !ellipse(29026.670340, 33210.490600, 1561.024045, 270.656808, 74.738000, X, Y) && !ellipse(30739.729492, 32996.549530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33552.941000, 33090.378800, 799.481623, 799.481623, 0.000000, X, Y) && !ellipse(30933.172272, 32563.562042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31760.707200, 32683.495000, 351.488010, 351.488010, 0.000000, X, Y) && !ellipse(33843.668000, 32344.348000, 337.421610, 337.421610, 0.000000, X, Y) && !ellipse(31044.456000, 32238.040000, 248.406407, 248.406407, 0.000000, X, Y) && !ellipse(32015.120400, 32028.040000, 279.902408, 279.902408, 0.000000, X, Y) && !ellipse(31361.291800, 31453.231000, 1712.176049, 214.022406, 67.014600, X, Y) && !ellipse(34140.379920, 31626.277600, 1697.464049, 246.080807, 244.038000, X, Y) && !ellipse(32390.799286, 31183.594635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34632.472382, 30657.489960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32830.878760, 30247.587000, 414.104012, 414.104012, 0.000000, X, Y) && !ellipse(32765.341400, 28691.066000, 860.512025, 860.512025, 0.000000, X, Y) && !ellipse(33866.090210, 28565.220673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.097000, 27090.408420, 1785.096051, 238.120007, 55.536200, X, Y) && !ellipse(29226.146296, 32418.344392, 1718.064049, 333.780131, 68.642088, X, Y) && !ellipse(29395.565642, 31956.047431, 1490.112043, 246.137010, 72.205716, X, Y) && !ellipse(34502.017840, 30887.985200, 1718.064049, 225.951207, 64.003000, X, Y) && !ellipse(31483.841200, 31165.306820, 1456.880042, 197.771206, 68.150000, X, Y) && !ellipse(29713.520844, 31097.335388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29905.460876, 30538.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34838.283400, 30218.354600, 1573.312045, 206.016806, 61.884000, X, Y) && !ellipse(33102.466614, 29726.235779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33375.817810, 29248.731415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30559.928253, 28751.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.205322, 27791.165466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33420.098389, 27617.194672, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 18:11:40 2012] Writing fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src104.gif
[Wed Mar 21 19:51:58 2012] Mean detx,y = (4681.56, -3224.58) 
[Wed Mar 21 19:52:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 19:52:35 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 19:52:35 2012] Setting source spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Wed Mar 21 19:52:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Wed Mar 21 22:45:28 2012] Not generating rmf since there are only 72 counts
[Wed Mar 21 22:45:28 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:14 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:14 2012] Error reading totcts from fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Thu Mar 22 05:08:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:20 2012] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0511010101_pi300-10000_pass1_cl_src104.arf
[Thu Mar 22 05:08:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:21 2012] Updating source flux to 3.3e-14
[Thu Mar 22 05:25:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting