[Mon Mar 19 14:27:35 2012] Detection parameters:
  Position = (372.0, 292.8) = 18 20 11.64 -14 36 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.3 +/- 11.5
  Background counts = 14.5
  Rate = 0.007 +/- 0.001

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 5.35'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 9.10"
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src88.ximg exists
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src88_1.ximg exists
[Tue Mar 20 15:36:00 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src88 appears to have run properly
[Tue Mar 20 15:36:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Tue Mar 20 15:36:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Tue Mar 20 15:36:04 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 253.579000, observed total counts = 251.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 90 = 0.999977 pixels
[Tue Mar 20 15:37:39 2012] 247.132000 total counts/ 188.829000 bgd. counts: snr = 4.242839
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 0.999977 pixels
  Position = (372.2, 291.9) = 18 20 11.57 -14 36 16.7
  Extent = 7.7 (5.4-11.1)", rotation angle = 0
  Source counts = 58.3 +/- 15.7
  Background counts = 188.8
  Rate = 0.005 +/- 0.001
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 316.920000, observed total counts = 316.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 90 = 0.837439 pixels
[Tue Mar 20 15:37:39 2012] Warning, changing simple spatial fit ID from 88 to 92
[Tue Mar 20 15:37:39 2012] 308.338000 total counts/ 156.481000 bgd. counts: snr = 12.139590
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 0.837439 pixels
  Position = (371.5, 292.3) = 18 20 11.79 -14 36 14.9
  Extent = 17.0 (15.1-17.9)", rotation angle = 0
  Source counts = 151.9 +/- 17.6
  Background counts = 156.5
  Rate = 0.01 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 86
[Tue Mar 20 15:37:39 2012] Source is confused with source 95
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 16.99"
[Wed Mar 21 07:06:27 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.044
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 16.99"
[Wed Mar 21 18:09:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src80.ximg exists
[Wed Mar 21 18:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src80.csv
[Wed Mar 21 18:09:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src80_1.ximg exists
[Wed Mar 21 18:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src80.csv
[Wed Mar 21 18:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:05 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Wed Mar 21 18:09:05 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Wed Mar 21 18:09:05 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 80 centroid is now closest to src. 83
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:09 2012] XMMSAS src. selection expression = ellipse(32272.096000, 25379.632000, 1019.256029, 1019.256029, 0.000000, X, Y)
[Thu Mar 22 01:08:09 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src90_src.reg
[Thu Mar 22 01:08:09 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (313, 234) - (430, 351)
[Thu Mar 22 01:08:09 2012] XMMSAS bgd. selection expression = annulus(32272.096000, 25379.632000, 1698.760049, 3397.520098, X, Y) && !ellipse(34154.656000, 26495.886000, 450.052813, 450.052813, 0.000000, X, Y) && !ellipse(33442.497000, 27725.852000, 924.528027, 924.528027, 0.000000, X, Y) && !ellipse(34644.024000, 25879.584000, 408.469612, 408.469612, 0.000000, X, Y) && !ellipse(32546.797800, 29255.458920, 507.617615, 507.617615, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(35489.840000, 24787.682600, 1675.856048, 283.536008, 49.430000, X, Y) && !ellipse(36291.955963, 24780.768463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32524.152000, 29327.100000, 874.928025, 874.928025, 0.000000, X, Y) && !ellipse(35836.134000, 24418.040000, 1548.376045, 1548.376045, 0.000000, X, Y) && !ellipse(33997.030945, 28118.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(33691.384000, 28785.434000, 312.985609, 312.985609, 0.000000, X, Y) && !ellipse(34447.424805, 27322.956360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34984.912600, 22048.775308, 417.781612, 417.781612, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(30573.806091, 28227.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31293.811000, 27033.936800, 359.284010, 359.284010, 0.000000, X, Y) && !ellipse(29496.917600, 28345.123800, 268.160008, 268.160008, 0.000000, X, Y) && !ellipse(31345.068600, 26936.864000, 992.272029, 992.272029, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33835.932000, 22165.716000, 475.872014, 475.872014, 0.000000, X, Y) && !ellipse(32011.692963, 25929.952759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30658.658755, 26324.617203, 1495.416043, 223.571728, 56.026743, X, Y) && !ellipse(30137.890940, 27097.246800, 506.622415, 506.622415, 0.000000, X, Y) && !ellipse(32910.130340, 24590.179200, 416.472012, 416.472012, 0.000000, X, Y) && !ellipse(33289.837341, 22825.888977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29276.901276, 28845.684692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31038.253021, 25813.712921, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:09 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src90.gif
[Thu Mar 22 01:48:17 2012] Mean detx,y = (-5024.33, -1858.12) 
[Thu Mar 22 01:48:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:48:38 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:48:38 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Thu Mar 22 01:48:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Thu Mar 22 05:08:35 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:35 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Thu Mar 22 05:08:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:40 2012] Using photon index=1.80, rate=0.0139, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src90.arf
[Thu Mar 22 05:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:40 2012] Updating source flux to 1.6e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 90 procflags, skipping spectral fitting