[Mon Mar 19 14:27:34 2012] Detection parameters: Position = (383.9, 321.0) = 18 20 8.07 -14 34 9.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 159.5 +/- 16.5 Background counts = 15.7 Rate = 0.02 +/- 0.002 [Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 6.41' [Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting [Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.63" [Tue Mar 20 05:26:48 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.221 [Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.63" [Tue Mar 20 15:35:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src12.ximg exists [Tue Mar 20 15:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src12.csv [Tue Mar 20 15:35:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src12_1.ximg exists [Tue Mar 20 15:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src12.csv [Tue Mar 20 15:35:58 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src12_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 20 15:36:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Tue Mar 20 15:36:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Tue Mar 20 15:36:01 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly [Tue Mar 20 15:37:38 2012] Spatial fit model total counts = 526.940000, observed total counts = 491.000000 [Tue Mar 20 15:37:38 2012] Offset between fit and detection position for source 74 = 2.044561 pixels [Tue Mar 20 15:37:38 2012] 404.811000 total counts/ 167.204000 bgd. counts: snr = 18.375362 Spatial fit parameters: Offset between fit and detection position for source 74 = 2.044561 pixels Position = (385.0, 319.2) = 18 20 7.77 -14 34 17.6 Extent = 11.6 (10.3-14.2)", rotation angle = 0 Source counts = 237.6 +/- 20.1 Background counts = 167.2 Rate = 0.02 +/- 0.002 [Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000 [Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound [Tue Mar 20 15:37:39 2012] Source does appear to be extended [Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 20 15:37:39 2012] Source is confused with source 73 [Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 11.56" [Wed Mar 21 07:06:27 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.903 [Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.56" [Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src11.ximg exists [Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src11_1.ximg exists [Wed Mar 21 18:08:58 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src11 appears to have run properly [Wed Mar 21 18:09:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Wed Mar 21 18:09:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Wed Mar 21 18:09:01 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Wed Mar 21 18:10:42 2012] Warning, spatial fit 11 centroid is now closest to src. 73 [Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000 [Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound [Wed Mar 21 18:10:43 2012] Source does appear to be extended [Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Mar 22 01:08:06 2012] XMMSAS src. selection expression = ellipse(33442.497000, 27725.852000, 693.396020, 693.396020, 0.000000, X, Y) [Thu Mar 22 01:08:06 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src74_src.reg [Thu Mar 22 01:08:06 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (345, 279) - (425, 359) [Thu Mar 22 01:08:06 2012] XMMSAS bgd. selection expression = annulus(33442.497000, 27725.852000, 1155.660033, 2311.320067, X, Y) && !ellipse(34154.656000, 26495.886000, 450.052813, 450.052813, 0.000000, X, Y) && !ellipse(34644.024000, 25879.584000, 408.469612, 408.469612, 0.000000, X, Y) && !ellipse(32546.797800, 29255.458920, 507.617615, 507.617615, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(35489.840000, 24787.682600, 1675.856048, 283.536008, 49.430000, X, Y) && !ellipse(36291.955963, 24780.768463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32524.152000, 29327.100000, 874.928025, 874.928025, 0.000000, X, Y) && !ellipse(33212.858600, 29738.958600, 400.760812, 400.760812, 0.000000, X, Y) && !ellipse(35836.134000, 24418.040000, 1548.376045, 1548.376045, 0.000000, X, Y) && !ellipse(33997.030945, 28118.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(33691.384000, 28785.434000, 312.985609, 312.985609, 0.000000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(34447.424805, 27322.956360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(30573.806091, 28227.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31293.811000, 27033.936800, 359.284010, 359.284010, 0.000000, X, Y) && !ellipse(31345.068600, 26936.864000, 992.272029, 992.272029, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32272.096000, 25379.632000, 1359.008039, 1359.008039, 0.000000, X, Y) && !ellipse(32011.692963, 25929.952759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30658.658755, 26324.617203, 1495.416043, 223.571728, 56.026743, X, Y) && !ellipse(31038.253021, 25813.712921, 870.000000, 870.000000, 0.000000, X, Y) [Thu Mar 22 01:08:06 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src74.gif [Thu Mar 22 01:11:55 2012] Mean detx,y = (-6287.88, 596.41) [Thu Mar 22 01:11:57 2012] Setting backscal keywords in source and bgd. spectrum [Thu Mar 22 01:12:20 2012] Binned source spectrum to 10 counts/bin [Thu Mar 22 01:12:21 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src74_src_b10.pi.gz [Thu Mar 22 01:12:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src74_bgd.pi.gz [Thu Mar 22 05:08:30 2012] Updating aperture counts using extracted products [Thu Mar 22 05:08:30 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src74_src_b10.pi.gz [Thu Mar 22 05:08:36 2012] Calculating source flux in energy range 0.30-8.00 [Thu Mar 22 05:08:36 2012] Using photon index=1.80, rate=0.0218, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src74.arf [Thu Mar 22 05:08:36 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Mar 22 05:08:36 2012] Updating source flux to 3e-13 [Thu Mar 22 05:15:35 2012] Flag c found in src. 74 procflags, skipping spectral fitting