[Mon Mar 19 14:27:34 2012] Detection parameters:
  Position = (388.0, 332.3) = 18 20 6.84 -14 33 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.3 +/- 13.2
  Background counts = 15.4
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 6.95'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.811
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 9.90"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src47.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src47.csv
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src47.csv
[Tue Mar 20 15:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue Mar 20 15:36:02 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Tue Mar 20 15:37:39 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 12.831627 pixels away
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 47 centroid is now closest to src. 71
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 465.290000, observed total counts = 448.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 70 = 0.910602 pixels
[Tue Mar 20 15:37:39 2012] Warning, changing simple spatial fit ID from 47 to 85
[Tue Mar 20 15:37:39 2012] 410.374800 total counts/ 369.625000 bgd. counts: snr = 2.119556
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.910602 pixels
  Position = (387.8, 331.4) = 18 20 6.91 -14 33 24.6
  Extent = 3.9 (2.8-5.5)", rotation angle = 0
  Source counts = 40.7 +/- 20.3
  Background counts = 369.6
  Rate = 0.004 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 66
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 3.91"
[Wed Mar 21 07:06:27 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.149
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 3.91"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src43.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src43.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src43.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed Mar 21 18:09:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 43 centroid is now closest to src. 73
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:07 2012] XMMSAS src. selection expression = ellipse(33691.384000, 28785.434000, 234.739207, 234.739207, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src70_src.reg
[Thu Mar 22 01:08:07 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (374, 318) - (401, 345)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(33691.384000, 28785.434000, 391.232011, 782.464023, X, Y) && !ellipse(33442.497000, 27725.852000, 924.528027, 924.528027, 0.000000, X, Y) && !ellipse(32546.797800, 29255.458920, 507.617615, 507.617615, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(32524.152000, 29327.100000, 874.928025, 874.928025, 0.000000, X, Y) && !ellipse(33212.858600, 29738.958600, 400.760812, 400.760812, 0.000000, X, Y) && !ellipse(33997.030945, 28118.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(34447.424805, 27322.956360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src70.gif
[Thu Mar 22 01:27:14 2012] Mean detx,y = (-6427.69, 1608.72) 
[Thu Mar 22 01:27:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:27:34 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:27:35 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Thu Mar 22 01:27:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Thu Mar 22 03:36:16 2012] Not generating rmf since there are only 40 counts
[Thu Mar 22 03:36:16 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:32 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:32 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.00374, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src70.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:38 2012] Updating source flux to 1.3e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 70 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Source 70 has fewer than 100.000000 counts, skipping spectral fitting