[Mon Mar 19 14:27:33 2012] Detection parameters:
  Position = (375.1, 336.1) = 18 20 10.71 -14 33 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.6 +/- 16.2
  Background counts = 16.7
  Rate = 0.02 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 6.20'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.244
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.53"
[Tue Mar 20 15:35:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Mar 20 15:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src16.csv
[Tue Mar 20 15:35:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Mar 20 15:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src16.csv
[Tue Mar 20 15:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Mar 20 15:36:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Mar 20 15:36:01 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Mar 20 15:37:38 2012] Spatial fit model total counts = 513.396000, observed total counts = 507.000000
[Tue Mar 20 15:37:38 2012] Offset between fit and detection position for source 67 = 0.856566 pixels
[Tue Mar 20 15:37:38 2012] 499.613000 total counts/ 413.148000 bgd. counts: snr = 4.253902
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.856566 pixels
  Position = (374.7, 336.8) = 18 20 10.85 -14 33 1.1
  Extent = 6.3 (4.9-9.5)", rotation angle = 0
  Source counts = 86.5 +/- 22.4
  Background counts = 413.1
  Rate = 0.008 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 71
[Tue Mar 20 15:37:39 2012] Source is confused with source 63
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 6.35"
[Wed Mar 21 07:06:27 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.35"
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src15.csv
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src15.csv
[Wed Mar 21 18:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Mar 21 18:09:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Mar 21 18:09:02 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 15 centroid is now closest to src. 60
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:06 2012] XMMSAS src. selection expression = ellipse(32546.797800, 29255.458920, 380.713211, 380.713211, 0.000000, X, Y)
[Thu Mar 22 01:08:06 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src67_src.reg
[Thu Mar 22 01:08:06 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (353, 315) - (397, 359)
[Thu Mar 22 01:08:06 2012] XMMSAS bgd. selection expression = annulus(32546.797800, 29255.458920, 634.522018, 1269.044037, X, Y) && !ellipse(33442.497000, 27725.852000, 924.528027, 924.528027, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(32524.152000, 29327.100000, 874.928025, 874.928025, 0.000000, X, Y) && !ellipse(33212.858600, 29738.958600, 400.760812, 400.760812, 0.000000, X, Y) && !ellipse(33997.030945, 28118.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(33691.384000, 28785.434000, 312.985609, 312.985609, 0.000000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(34447.424805, 27322.956360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32633.927600, 31049.634000, 708.405620, 708.405620, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(30573.806091, 28227.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:06 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src67.gif
[Thu Mar 22 01:13:29 2012] Mean detx,y = (-5297.31, 2035.88) 
[Thu Mar 22 01:13:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:13:49 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:13:49 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Mar 22 01:13:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Thu Mar 22 02:39:28 2012] Not generating rmf since there are only 86 counts
[Thu Mar 22 02:39:28 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:31 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:31 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Mar 22 05:08:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:36 2012] Using photon index=1.80, rate=0.00793, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src67.arf
[Thu Mar 22 05:08:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:36 2012] Updating source flux to 1.2e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 67 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Source 67 has fewer than 100.000000 counts, skipping spectral fitting