[Mon Mar 19 14:27:33 2012] Detection parameters:
  Position = (343.4, 343.1) = 18 20 20.23 -14 32 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 13.6
  Background counts = 17.5
  Rate = 0.01 +/- 0.001

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 4.59'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 8.73"
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src64.ximg exists
[Tue Mar 20 15:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src64.csv
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src64_1.ximg exists
[Tue Mar 20 15:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src64.csv
[Tue Mar 20 15:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Tue Mar 20 15:36:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 64 centroid is now closest to src. 68
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 360.078000, observed total counts = 359.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 64 = 2.556792 pixels
[Tue Mar 20 15:37:39 2012] Warning, changing simple spatial fit ID from 64 to 68
[Tue Mar 20 15:37:39 2012] 329.420000 total counts/ 190.939000 bgd. counts: snr = 10.021734
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 2.556792 pixels
  Position = (344.6, 340.9) = 18 20 19.87 -14 32 43.6
  Extent = 17.3 (17.3-34.7)" x 8.4 (6.0-11.0)", rotation angle = 90
  Source counts = 138.5 +/- 18.1
  Background counts = 190.9
  Rate = 0.01 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57
[Tue Mar 20 15:37:39 2012] Source is asymmetric
[Tue Mar 20 15:37:39 2012] Source is confused with source 68
[Tue Mar 20 15:37:39 2012] Source is confused with source 69
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Wed Mar 21 07:06:27 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.024
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 12.87"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src58.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src58.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src58_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src58.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Wed Mar 21 18:09:04 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 58 centroid is now closest to src. 59
[Wed Mar 21 18:10:42 2012] Source 64 is offset by 1.642549 and -3.051080 pixels which is larger than
2 X fitted extent = 2.686248 x 2.686248, not incorporating fit results
[Wed Mar 21 18:10:42 2012] Source 64 is offset by 2.548986 and -5.660161 pixels which is larger than
2 X fitted extent = 2.738993 x 2.738993, not incorporating fit results
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57
[Wed Mar 21 18:10:43 2012] Source is asymmetric
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(29929.921800, 29607.960000, 1039.818030, 504.525015, 90.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src64_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (285, 281) - (404, 401)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(29929.921800, 29607.960000, 1733.030050, 3466.060100, X, Y) && !ellipse(26950.198200, 27608.188000, 481.158414, 337.092010, 15.978209, X, Y) && !ellipse(33442.497000, 27725.852000, 924.528027, 924.528027, 0.000000, X, Y) && !ellipse(30941.882000, 32766.584000, 540.632816, 540.632816, 0.000000, X, Y) && !ellipse(32546.797800, 29255.458920, 507.617615, 507.617615, 0.000000, X, Y) && !ellipse(32434.287000, 31603.152000, 519.773615, 519.773615, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(31939.380400, 32946.104000, 438.801613, 438.801613, 0.000000, X, Y) && !ellipse(32524.152000, 29327.100000, 874.928025, 874.928025, 0.000000, X, Y) && !ellipse(33212.858600, 29738.958600, 400.760812, 400.760812, 0.000000, X, Y) && !ellipse(32075.405800, 32522.730000, 492.326414, 492.326414, 0.000000, X, Y) && !ellipse(33997.030945, 28118.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30903.320000, 33038.132000, 1033.536030, 1033.536030, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(28612.480194, 33287.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(31629.986000, 34008.596000, 1360.416039, 1360.416039, 0.000000, X, Y) && !ellipse(33691.384000, 28785.434000, 312.985609, 312.985609, 0.000000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(32633.927600, 31049.634000, 708.405620, 708.405620, 0.000000, X, Y) && !ellipse(29064.958200, 31766.191800, 510.291215, 510.291215, 0.000000, X, Y) && !ellipse(28806.281589, 32592.440905, 1513.608044, 285.172489, 71.999530, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(27549.244507, 33373.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32320.495400, 31973.440000, 1051.136030, 1051.136030, 0.000000, X, Y) && !ellipse(30573.806091, 28227.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29550.202600, 30470.046000, 661.284819, 661.284819, 0.000000, X, Y) && !ellipse(27790.745972, 32748.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31293.811000, 27033.936800, 359.284010, 359.284010, 0.000000, X, Y) && !ellipse(28135.222748, 31443.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29496.917600, 28345.123800, 268.160008, 268.160008, 0.000000, X, Y) && !ellipse(31345.068600, 26936.864000, 992.272029, 992.272029, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32272.096000, 25379.632000, 1359.008039, 1359.008039, 0.000000, X, Y) && !ellipse(28649.175354, 30221.573975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32011.692963, 25929.952759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.873444, 30669.758850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30658.658755, 26324.617203, 1495.416043, 223.571728, 56.026743, X, Y) && !ellipse(29418.846200, 30833.704000, 1211.072035, 363.791210, 90.000000, X, Y) && !ellipse(28932.918320, 32193.761600, 1495.416043, 277.064008, 72.211000, X, Y) && !ellipse(30137.890940, 27097.246800, 506.622415, 506.622415, 0.000000, X, Y) && !ellipse(28314.280579, 31078.351929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29276.901276, 28845.684692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31038.253021, 25813.712921, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src64.gif
[Thu Mar 22 01:35:39 2012] Mean detx,y = (-2613.11, 2194.53) 
[Thu Mar 22 01:35:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:36:10 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:36:11 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Mar 22 01:36:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Thu Mar 22 05:08:33 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Mar 22 05:08:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:39 2012] Using photon index=1.80, rate=0.0127, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src64.arf
[Thu Mar 22 05:08:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:39 2012] Updating source flux to 1.6e-13
[Thu Mar 22 05:15:35 2012] Flag b found in src. 64 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Flag c found in src. 64 procflags, skipping spectral fitting