[Mon Mar 19 14:27:33 2012] Detection parameters:
  Position = (372.0, 341.9) = 18 20 11.64 -14 32 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.3 +/- 15.6
  Background counts = 17.0
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 6.20'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.243
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.53"
[Tue Mar 20 15:35:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src29.ximg exists
[Tue Mar 20 15:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src29.csv
[Tue Mar 20 15:35:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Mar 20 15:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src29.csv
[Tue Mar 20 15:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Mar 20 15:36:02 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 471.061000, observed total counts = 473.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 63 = 4.902100 pixels
[Tue Mar 20 15:37:39 2012] 493.428000 total counts/ 324.742000 bgd. counts: snr = 9.360732
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 4.902100 pixels
  Position = (374.4, 337.7) = 18 20 10.93 -14 32 57.6
  Extent = 10.9 (9.3-11.8)", rotation angle = 0
  Source counts = 168.7 +/- 22.2
  Background counts = 324.7
  Rate = 0.02 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 67
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.94"
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src26.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src26.csv
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src26.csv
[Wed Mar 21 18:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Mar 21 18:09:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Mar 21 18:09:02 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 26 centroid is now closest to src. 61
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:07 2012] XMMSAS src. selection expression = ellipse(32524.152000, 29327.100000, 656.196019, 656.196019, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src63_src.reg
[Thu Mar 22 01:08:07 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (337, 300) - (412, 375)
[Thu Mar 22 01:08:07 2012] XMMSAS bgd. selection expression = annulus(32524.152000, 29327.100000, 1093.660031, 2187.320063, X, Y) && !ellipse(33442.497000, 27725.852000, 924.528027, 924.528027, 0.000000, X, Y) && !ellipse(32546.797800, 29255.458920, 507.617615, 507.617615, 0.000000, X, Y) && !ellipse(32434.287000, 31603.152000, 519.773615, 519.773615, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(33212.858600, 29738.958600, 400.760812, 400.760812, 0.000000, X, Y) && !ellipse(33997.030945, 28118.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(33691.384000, 28785.434000, 312.985609, 312.985609, 0.000000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(34447.424805, 27322.956360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32633.927600, 31049.634000, 708.405620, 708.405620, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(32320.495400, 31973.440000, 1051.136030, 1051.136030, 0.000000, X, Y) && !ellipse(30573.806091, 28227.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31293.811000, 27033.936800, 359.284010, 359.284010, 0.000000, X, Y) && !ellipse(31345.068600, 26936.864000, 992.272029, 992.272029, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30658.658755, 26324.617203, 1495.416043, 223.571728, 56.026743, X, Y) && !ellipse(29418.846200, 30833.704000, 1211.072035, 363.791210, 90.000000, X, Y) && !ellipse(28932.918320, 32193.761600, 1495.416043, 277.064008, 72.211000, X, Y) && !ellipse(30137.890940, 27097.246800, 506.622415, 506.622415, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src63.gif
[Thu Mar 22 01:17:31 2012] Mean detx,y = (-5273.21, 2089.70) 
[Thu Mar 22 01:17:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:17:58 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:17:58 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Mar 22 01:17:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Thu Mar 22 05:08:31 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:31 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Mar 22 05:08:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:37 2012] Using photon index=1.80, rate=0.0155, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src63.arf
[Thu Mar 22 05:08:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:37 2012] Updating source flux to 2e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 63 procflags, skipping spectral fitting