[Mon Mar 19 14:27:33 2012] Detection parameters:
  Position = (377.1, 354.1) = 18 20 10.13 -14 31 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.9 +/- 13.4
  Background counts = 16.2
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 6.98'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.92"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src53.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src53.csv
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src53.csv
[Tue Mar 20 15:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue Mar 20 15:36:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 425.675000, observed total counts = 429.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 57 = 3.670376 pixels
[Tue Mar 20 15:37:39 2012] 345.708100 total counts/ 251.133000 bgd. counts: snr = 5.967946
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 3.670376 pixels
  Position = (375.7, 357.4) = 18 20 10.56 -14 31 31.4
  Extent = 8.9 (6.0-13.8)", rotation angle = 0
  Source counts = 94.6 +/- 18.6
  Background counts = 251.1
  Rate = 0.009 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 51
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 8.86"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src48.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src48.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src48.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed Mar 21 18:09:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 10.815434 pixels away
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(32633.927600, 31049.634000, 531.304215, 531.304215, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src57_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (345, 327) - (406, 388)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(32633.927600, 31049.634000, 885.507025, 1771.014051, X, Y) && !ellipse(30941.882000, 32766.584000, 540.632816, 540.632816, 0.000000, X, Y) && !ellipse(32546.797800, 29255.458920, 507.617615, 507.617615, 0.000000, X, Y) && !ellipse(32434.287000, 31603.152000, 519.773615, 519.773615, 0.000000, X, Y) && !ellipse(32697.588000, 28795.346000, 602.902417, 602.902417, 0.000000, X, Y) && !ellipse(31939.380400, 32946.104000, 438.801613, 438.801613, 0.000000, X, Y) && !ellipse(32524.152000, 29327.100000, 874.928025, 874.928025, 0.000000, X, Y) && !ellipse(33212.858600, 29738.958600, 400.760812, 400.760812, 0.000000, X, Y) && !ellipse(32075.405800, 32522.730000, 492.326414, 492.326414, 0.000000, X, Y) && !ellipse(30903.320000, 33038.132000, 1033.536030, 1033.536030, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(31629.986000, 34008.596000, 1360.416039, 1360.416039, 0.000000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(32320.495400, 31973.440000, 1051.136030, 1051.136030, 0.000000, X, Y) && !ellipse(33455.142120, 29268.383942, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src57.gif
[Thu Mar 22 01:30:53 2012] Mean detx,y = (-5281.62, 3821.07) 
[Thu Mar 22 01:30:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:31:10 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:31:10 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Mar 22 01:31:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Thu Mar 22 03:53:17 2012] Not generating rmf since there are only 94 counts
[Thu Mar 22 03:53:17 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:33 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.00868, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src57.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:38 2012] Updating source flux to 1.2e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 57 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Source 57 has fewer than 100.000000 counts, skipping spectral fitting