[Mon Mar 19 14:27:32 2012] Detection parameters:
  Position = (335.0, 365.1) = 18 20 22.72 -14 30 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.0 +/- 13.8
  Background counts = 17.3
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 5.51'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.320
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 9.18"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src54.ximg exists
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue Mar 20 15:35:59 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src54 appears to have run properly
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue Mar 20 15:36:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 310.687000, observed total counts = 311.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 50 = 0.601479 pixels
[Tue Mar 20 15:37:39 2012] 299.844000 total counts/ 230.175000 bgd. counts: snr = 4.592091
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.601479 pixels
  Position = (334.7, 365.5) = 18 20 22.83 -14 30 56.3
  Extent = 6.3 (4.8-7.4)", rotation angle = 0
  Source counts = 69.7 +/- 17.3
  Background counts = 230.2
  Rate = 0.006 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 44
[Tue Mar 20 15:37:39 2012] Source is confused with source 46
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 6.29"
[Wed Mar 21 07:06:27 2012] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.793
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 6.29"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src49.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src49.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src49_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src49.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Mar 21 18:09:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Wed Mar 21 18:10:42 2012] Spatial fit model total counts = 308.053000, observed total counts = 311.000000
[Wed Mar 21 18:10:42 2012] Offset between fit and detection position for source 50 = 0.148324 pixels
[Wed Mar 21 18:10:42 2012] 292.562700 total counts/ 224.246000 bgd. counts: snr = 4.562097
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.148324 pixels
  Position = (334.6, 365.7) = 18 20 22.85 -14 30 55.6
  Extent = 6.4 (4.7-8.9)", rotation angle = 0
  Source counts = 68.3 +/- 17.1
  Background counts = 224.2
  Rate = 0.006 +/- 0.002
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(29064.958200, 31766.191800, 382.718411, 382.718411, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src50_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (313, 344) - (357, 388)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(29064.958200, 31766.191800, 637.864018, 1275.728037, X, Y) && !ellipse(30903.320000, 33038.132000, 1033.536030, 1033.536030, 0.000000, X, Y) && !ellipse(28612.480194, 33287.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.986000, 34008.596000, 1360.416039, 1360.416039, 0.000000, X, Y) && !ellipse(28806.281589, 32592.440905, 1513.608044, 285.172489, 71.999530, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(27549.244507, 33373.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29550.202600, 30470.046000, 661.284819, 661.284819, 0.000000, X, Y) && !ellipse(27790.745972, 32748.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.222748, 31443.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28649.175354, 30221.573975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.873444, 30669.758850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29418.846200, 30833.704000, 1211.072035, 363.791210, 90.000000, X, Y) && !ellipse(28932.918320, 32193.761600, 1495.416043, 277.064008, 72.211000, X, Y) && !ellipse(28314.280579, 31078.351929, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src50.gif
[Thu Mar 22 01:31:15 2012] Mean detx,y = (-1669.67, 4355.88) 
[Thu Mar 22 01:31:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:31:32 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:31:33 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Mar 22 01:31:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu Mar 22 03:53:22 2012] Not generating rmf since there are only 68 counts
[Thu Mar 22 03:53:22 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:33 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.00627, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src50.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:38 2012] Updating source flux to 9e-14
[Thu Mar 22 05:15:35 2012] Flag c found in src. 50 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Source 50 has fewer than 100.000000 counts, skipping spectral fitting