[Mon Mar 19 14:27:32 2012] Detection parameters:
  Position = (354.4, 384.5) = 18 20 16.92 -14 29 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 13.6
  Background counts = 15.8
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 7.44'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.779
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.15"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src36.ximg exists
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue Mar 20 15:35:59 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src36 appears to have run properly
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue Mar 20 15:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue Mar 20 15:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Mar 20 15:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 329.288000, observed total counts = 313.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 36 = 2.599746 pixels
[Tue Mar 20 15:37:39 2012] 329.797000 total counts/ 94.888000 bgd. counts: snr = 24.115374
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 2.599746 pixels
  Position = (355.2, 382.0) = 18 20 16.68 -14 29 44.6
  Extent = 20.3" x 5.3", rotation angle = 81
  Source counts = 234.9 +/- 18.2
  Background counts = 94.9
  Rate = 0.02 +/- 0.002
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 3.84
[Tue Mar 20 15:37:39 2012] Source is asymmetric
[Tue Mar 20 15:37:39 2012] Source is confused with source 42
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.845
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 12.79"
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src33.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src33.csv
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src33.csv
[Wed Mar 21 18:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Mar 21 18:09:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Mar 21 18:10:42 2012] Spatial fit model total counts = 404.730000, observed total counts = 370.000000
[Wed Mar 21 18:10:42 2012] Offset between fit and detection position for source 36 = 1.785712 pixels
[Wed Mar 21 18:10:42 2012] 318.849400 total counts/ 57.871400 bgd. counts: snr = 34.306144
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.785712 pixels
  Position = (355.8, 380.3) = 18 20 16.52 -14 29 52.0
  Extent = 12.9 (9.6-15.7)", rotation angle = 0
  Source counts = 261.0 +/- 17.9
  Background counts = 57.9
  Rate = 0.02 +/- 0.002
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:07 2012] XMMSAS src. selection expression = ellipse(30903.320000, 33038.132000, 775.152022, 775.152022, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src36_src.reg
[Thu Mar 22 01:08:07 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (311, 336) - (400, 425)
[Thu Mar 22 01:08:07 2012] XMMSAS bgd. selection expression = annulus(30903.320000, 33038.132000, 1291.920037, 2583.840074, X, Y) && !ellipse(31275.321660, 34985.436600, 542.441616, 542.441616, 0.000000, X, Y) && !ellipse(30008.311800, 35962.604400, 1026.088030, 1026.088030, 0.000000, X, Y) && !ellipse(30191.924879, 35040.269969, 1694.088049, 401.067257, 259.564871, X, Y) && !ellipse(31122.621887, 35703.213837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30941.882000, 32766.584000, 540.632816, 540.632816, 0.000000, X, Y) && !ellipse(32434.287000, 31603.152000, 519.773615, 519.773615, 0.000000, X, Y) && !ellipse(31939.380400, 32946.104000, 438.801613, 438.801613, 0.000000, X, Y) && !ellipse(27889.294000, 35761.592400, 579.355217, 579.355217, 0.000000, X, Y) && !ellipse(32075.405800, 32522.730000, 492.326414, 492.326414, 0.000000, X, Y) && !ellipse(28100.006000, 34870.490000, 1226.400035, 1226.400035, 0.000000, X, Y) && !ellipse(31780.383000, 33557.772000, 263.396808, 263.396808, 0.000000, X, Y) && !ellipse(28612.480194, 33287.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(31629.986000, 34008.596000, 1360.416039, 1360.416039, 0.000000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(32633.927600, 31049.634000, 708.405620, 708.405620, 0.000000, X, Y) && !ellipse(29064.958200, 31766.191800, 510.291215, 510.291215, 0.000000, X, Y) && !ellipse(28806.281589, 32592.440905, 1513.608044, 285.172489, 71.999530, X, Y) && !ellipse(28155.100952, 34519.057495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(27549.244507, 33373.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32320.495400, 31973.440000, 1051.136030, 1051.136030, 0.000000, X, Y) && !ellipse(29550.202600, 30470.046000, 661.284819, 661.284819, 0.000000, X, Y) && !ellipse(27790.745972, 32748.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.222748, 31443.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28649.175354, 30221.573975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.873444, 30669.758850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29418.846200, 30833.704000, 1211.072035, 363.791210, 90.000000, X, Y) && !ellipse(28932.918320, 32193.761600, 1495.416043, 277.064008, 72.211000, X, Y) && !ellipse(28314.280579, 31078.351929, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src36.gif
[Thu Mar 22 01:20:53 2012] Mean detx,y = (-3440.06, 5752.22) 
[Thu Mar 22 01:20:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:21:20 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:21:21 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Mar 22 01:21:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Mar 22 05:08:32 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:32 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Mar 22 05:08:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:37 2012] Using photon index=1.80, rate=0.0239, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src36.arf
[Thu Mar 22 05:08:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:37 2012] Updating source flux to 3.5e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 36 procflags, skipping spectral fitting