[Mon Mar 19 14:27:31 2012] Detection parameters:
  Position = (361.7, 395.0) = 18 20 14.75 -14 28 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.4 +/- 12.1
  Background counts = 12.3
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 8.37'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 10.61"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src44.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src44.csv
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src44.csv
[Tue Mar 20 15:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue Mar 20 15:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Mar 20 15:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue Mar 20 15:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:39 2012] Source 35 is offset by -9.052112 and -3.766677 pixels which is larger than
2 X fitted extent = 4.198579 x 1.223033, not incorporating fit results
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 10.61"
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src41.ximg exists
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Mar 21 18:08:58 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src41 appears to have run properly
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Mar 21 18:09:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 13.810805 pixels away
[Wed Mar 21 18:10:42 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 15.352309 pixels away
[Wed Mar 21 18:10:42 2012] Spatial fit model total counts = 467.547000, observed total counts = 464.000000
[Wed Mar 21 18:10:42 2012] Offset between fit and detection position for source 35 = 4.327825 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 4.327825 pixels
  Position = (364.1, 391.5) = 18 20 14.02 -14 29 3.5
  Extent = 17.0 (16.2-18.2)", rotation angle = 0
  Source counts = 376.1 +/- 19.4
  Background counts = 0.0
  Rate = 0.03 +/- 0.002
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:10:43 2012] Source is confused with source 37
[Thu Mar 22 01:08:07 2012] XMMSAS src. selection expression = ellipse(31629.986000, 34008.596000, 1020.312029, 1020.312029, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src35_src.reg
[Thu Mar 22 01:08:07 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (305, 333) - (423, 450)
[Thu Mar 22 01:08:07 2012] XMMSAS bgd. selection expression = annulus(31629.986000, 34008.596000, 1700.520049, 3401.040098, X, Y) && !ellipse(31275.321660, 34985.436600, 542.441616, 542.441616, 0.000000, X, Y) && !ellipse(30008.311800, 35962.604400, 1026.088030, 1026.088030, 0.000000, X, Y) && !ellipse(30916.267700, 36822.313995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30191.924879, 35040.269969, 1694.088049, 401.067257, 259.564871, X, Y) && !ellipse(31122.621887, 35703.213837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30941.882000, 32766.584000, 540.632816, 540.632816, 0.000000, X, Y) && !ellipse(32434.287000, 31603.152000, 519.773615, 519.773615, 0.000000, X, Y) && !ellipse(31939.380400, 32946.104000, 438.801613, 438.801613, 0.000000, X, Y) && !ellipse(27889.294000, 35761.592400, 579.355217, 579.355217, 0.000000, X, Y) && !ellipse(32075.405800, 32522.730000, 492.326414, 492.326414, 0.000000, X, Y) && !ellipse(30903.320000, 33038.132000, 1033.536030, 1033.536030, 0.000000, X, Y) && !ellipse(28100.006000, 34870.490000, 1226.400035, 1226.400035, 0.000000, X, Y) && !ellipse(31780.383000, 33557.772000, 263.396808, 263.396808, 0.000000, X, Y) && !ellipse(28612.480194, 33287.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32948.469200, 30296.394200, 1583.064046, 207.017606, 65.575000, X, Y) && !ellipse(31705.658000, 30880.848000, 1354.160039, 1354.160039, 0.000000, X, Y) && !ellipse(32633.927600, 31049.634000, 708.405620, 708.405620, 0.000000, X, Y) && !ellipse(29064.958200, 31766.191800, 510.291215, 510.291215, 0.000000, X, Y) && !ellipse(28806.281589, 32592.440905, 1513.608044, 285.172489, 71.999530, X, Y) && !ellipse(28155.100952, 34519.057495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29929.921800, 29607.960000, 1386.424040, 672.700019, 90.000000, X, Y) && !ellipse(29946.061000, 29385.348000, 1235.256036, 1235.256036, 0.000000, X, Y) && !ellipse(27549.244507, 33373.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32320.495400, 31973.440000, 1051.136030, 1051.136030, 0.000000, X, Y) && !ellipse(29550.202600, 30470.046000, 661.284819, 661.284819, 0.000000, X, Y) && !ellipse(27790.745972, 32748.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.222748, 31443.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28649.175354, 30221.573975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28472.873444, 30669.758850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29418.846200, 30833.704000, 1211.072035, 363.791210, 90.000000, X, Y) && !ellipse(28932.918320, 32193.761600, 1495.416043, 277.064008, 72.211000, X, Y) && !ellipse(28314.280579, 31078.351929, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src35.gif
[Thu Mar 22 01:25:57 2012] Mean detx,y = (-4020.98, 6803.96) 
[Thu Mar 22 01:26:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:26:44 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:26:44 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Mar 22 01:26:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Mar 22 05:08:32 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:32 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.0345, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src35.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:38 2012] Updating source flux to 8.1e-13
[Thu Mar 22 05:15:35 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Flag c found in src. 35 procflags, skipping spectral fitting