[Mon Mar 19 14:27:31 2012] Detection parameters:
  Position = (313.4, 396.1) = 18 20 29.22 -14 28 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.2 +/- 10.7
  Background counts = 12.7
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 7.16'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.892
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.01"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src59.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src59.csv
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src59_1.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src59.csv
[Tue Mar 20 15:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Tue Mar 20 15:36:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Tue Mar 20 15:36:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Tue Mar 20 15:36:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 59 centroid is now closest to src. 39
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.892
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 10.01"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src53.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src53.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src53_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src53.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Wed Mar 21 18:09:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Wed Mar 21 18:09:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Wed Mar 21 18:09:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 53 centroid is now closest to src. 38
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(27214.349731, 34409.378235, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src34_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (276, 359) - (351, 434)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(27214.349731, 34409.378235, 1087.500000, 2175.000000, X, Y) && !ellipse(30008.311800, 35962.604400, 1026.088030, 1026.088030, 0.000000, X, Y) && !ellipse(30191.924879, 35040.269969, 1694.088049, 401.067257, 259.564871, X, Y) && !ellipse(27889.294000, 35761.592400, 579.355217, 579.355217, 0.000000, X, Y) && !ellipse(27059.749800, 35260.092000, 814.128023, 814.128023, 0.000000, X, Y) && !ellipse(28100.006000, 34870.490000, 1226.400035, 1226.400035, 0.000000, X, Y) && !ellipse(28612.480194, 33287.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29064.958200, 31766.191800, 510.291215, 510.291215, 0.000000, X, Y) && !ellipse(28806.281589, 32592.440905, 1513.608044, 285.172489, 71.999530, X, Y) && !ellipse(28155.100952, 34519.057495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.244507, 33373.526520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.745972, 32748.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28135.222748, 31443.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28932.918320, 32193.761600, 1495.416043, 277.064008, 72.211000, X, Y) && !ellipse(25503.820557, 34512.587189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24832.345062, 33005.828857, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src34.gif
[Thu Mar 22 01:33:00 2012] Mean detx,y = (381.30, 7014.35) 
[Thu Mar 22 01:33:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:33:18 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:33:20 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Mar 22 01:33:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Mar 22 04:01:54 2012] Not generating rmf since there are only 66 counts
[Thu Mar 22 04:01:54 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:33 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src34.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:38 2012] Updating source flux to 2.3e-13
[Thu Mar 22 05:15:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting