[Mon Mar 19 14:27:31 2012] Detection parameters:
  Position = (317.7, 470.0) = 18 20 27.93 -14 23 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.6 +/- 14.6
  Background counts = 5.4
  Rate = 0.01 +/- 0.001

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 12.51'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.878
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.69"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src49.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src49.csv
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src49.csv
[Tue Mar 20 15:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Mar 20 15:36:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Tue Mar 20 15:37:39 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 12.463287 pixels away
[Tue Mar 20 15:37:39 2012] Spatial fit model total counts = 355.224000, observed total counts = 338.000000
[Tue Mar 20 15:37:39 2012] Offset between fit and detection position for source 22 = 5.057691 pixels
[Tue Mar 20 15:37:39 2012] 239.260300 total counts/ 62.879300 bgd. counts: snr = 22.243235
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 5.057691 pixels
  Position = (317.2, 475.0) = 18 20 28.06 -14 23 0.1
  Extent = 12.0 (10.4-15.2)", rotation angle = 0
  Source counts = 176.4 +/- 15.5
  Background counts = 62.9
  Rate = 0.02 +/- 0.001
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 19
[Wed Mar 21 07:06:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.848
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 12.00"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src45.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src45.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src45_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src45.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Wed Mar 21 18:09:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Wed Mar 21 18:10:42 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 10.144004 pixels away
[Wed Mar 21 18:10:42 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 14.742795 pixels away
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(27550.814000, 41277.674000, 719.976021, 719.976021, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src22_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (276, 434) - (359, 516)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(27550.814000, 41277.674000, 1199.960035, 2399.920069, X, Y) && !ellipse(29454.703278, 42325.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.615417, 43186.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27859.418304, 43791.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29509.577000, 42852.852000, 1666.136048, 361.772810, 97.772610, X, Y) && !ellipse(27552.602000, 42040.740000, 731.960821, 731.960821, 0.000000, X, Y) && !ellipse(27539.135080, 41575.131800, 2064.720059, 551.681616, 89.464828, X, Y) && !ellipse(26386.767800, 41739.979400, 1070.800031, 1070.800031, 0.000000, X, Y) && !ellipse(26457.280600, 42892.714000, 927.688027, 927.688027, 0.000000, X, Y) && !ellipse(26495.381534, 40804.404170, 2616.400075, 631.191732, 90.002999, X, Y) && !ellipse(26619.373596, 43805.534882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.578491, 42052.857117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.984400, 43214.341440, 473.058414, 473.058414, 0.000000, X, Y) && !ellipse(24978.153961, 42819.337524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.029600, 43413.196000, 2157.224062, 1135.456033, 95.455470, X, Y) && !ellipse(24905.928000, 41950.628200, 773.967222, 773.967222, 0.000000, X, Y) && !ellipse(24915.731567, 41015.778778, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src22.gif
[Thu Mar 22 01:29:11 2012] Mean detx,y = (303.60, 13778.13) 
[Thu Mar 22 01:29:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:29:40 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:29:40 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Mar 22 01:29:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Mar 22 05:08:32 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src22.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:38 2012] Updating source flux to 8.5e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 22 procflags, skipping spectral fitting