[Mon Mar 19 14:27:31 2012] Detection parameters:
  Position = (303.8, 469.0) = 18 20 32.08 -14 23 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.5 +/- 13.6
  Background counts = 5.6
  Rate = 0.009 +/- 0.001

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 12.37'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 12.61"
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src67.ximg exists
[Tue Mar 20 15:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src67.csv
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src67_1.ximg exists
[Tue Mar 20 15:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src67.csv
[Tue Mar 20 15:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Tue Mar 20 15:36:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Tue Mar 20 15:37:39 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.455476 pixels away
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 67 centroid is now closest to src. 11
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 19
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 12.61"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src61.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src61.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src61_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src61.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Wed Mar 21 18:09:04 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Wed Mar 21 18:10:42 2012] Spatial fit model total counts = 935.159000, observed total counts = 935.000000
[Wed Mar 21 18:10:42 2012] Offset between fit and detection position for source 21 = 1.431996 pixels
[Wed Mar 21 18:10:42 2012] Warning, changing simple spatial fit ID from 61 to 44
[Wed Mar 21 18:10:42 2012] 531.042000 total counts/ 390.708000 bgd. counts: snr = 7.099647
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.431996 pixels
  Position = (305.1, 469.6) = 18 20 31.69 -14 23 23.8
  Extent = 32.7" x 7.9", rotation angle = 90
  Source counts = 140.3 +/- 23.0
  Background counts = 390.7
  Rate = 0.01 +/- 0.002
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 4.15
[Wed Mar 21 18:10:43 2012] Source is asymmetric
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(26495.381534, 40804.404170, 1962.300056, 473.393799, 90.002999, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src21_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (192, 357) - (418, 582)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(26495.381534, 40804.404170, 3270.500094, 6541.000188, X, Y) && !ellipse(31275.321660, 34985.436600, 542.441616, 542.441616, 0.000000, X, Y) && !ellipse(30008.311800, 35962.604400, 1026.088030, 1026.088030, 0.000000, X, Y) && !ellipse(30916.267700, 36822.313995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30191.924879, 35040.269969, 1694.088049, 401.067257, 259.564871, X, Y) && !ellipse(31122.621887, 35703.213837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29454.703278, 42325.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27889.294000, 35761.592400, 579.355217, 579.355217, 0.000000, X, Y) && !ellipse(27652.615417, 43186.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27059.749800, 35260.092000, 814.128023, 814.128023, 0.000000, X, Y) && !ellipse(28100.006000, 34870.490000, 1226.400035, 1226.400035, 0.000000, X, Y) && !ellipse(27859.418304, 43791.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29509.577000, 42852.852000, 1666.136048, 361.772810, 97.772610, X, Y) && !ellipse(31629.986000, 34008.596000, 1360.416039, 1360.416039, 0.000000, X, Y) && !ellipse(27552.602000, 42040.740000, 731.960821, 731.960821, 0.000000, X, Y) && !ellipse(27539.135080, 41575.131800, 2064.720059, 551.681616, 89.464828, X, Y) && !ellipse(27550.814000, 41277.674000, 959.968028, 959.968028, 0.000000, X, Y) && !ellipse(26386.767800, 41739.979400, 1070.800031, 1070.800031, 0.000000, X, Y) && !ellipse(27214.349731, 34409.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28155.100952, 34519.057495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26457.280600, 42892.714000, 927.688027, 927.688027, 0.000000, X, Y) && !ellipse(26619.373596, 43805.534882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.578491, 42052.857117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.984400, 43214.341440, 473.058414, 473.058414, 0.000000, X, Y) && !ellipse(25503.820557, 34512.587189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.153961, 42819.337524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.029600, 43413.196000, 2157.224062, 1135.456033, 95.455470, X, Y) && !ellipse(24905.928000, 41950.628200, 773.967222, 773.967222, 0.000000, X, Y) && !ellipse(24915.731567, 41015.778778, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src21.gif
[Thu Mar 22 01:37:01 2012] Mean detx,y = (1384.06, 13588.73) 
[Thu Mar 22 01:37:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:38:39 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:38:39 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Mar 22 01:38:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Mar 22 05:08:33 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Mar 22 05:08:39 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:39 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src21.arf
[Thu Mar 22 05:08:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:39 2012] Updating source flux to 3.2e-13
[Thu Mar 22 05:15:35 2012] Flag c found in src. 21 procflags, skipping spectral fitting