[Mon Mar 19 14:27:38 2012] Detection parameters:
  Position = (320.8, 503.9) = 18 20 27.00 -14 20 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.9 +/- 17.1
  Background counts = 7.7
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 14.98'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Tue Mar 20 05:26:48 2012] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.986
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.92"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src39.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src39.csv
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Mar 20 15:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src39.csv
[Tue Mar 20 15:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Mar 20 15:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Tue Mar 20 15:36:02 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Mar 20 15:36:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Tue Mar 20 15:36:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 39 centroid is now closest to src. 10
[Tue Mar 20 15:37:39 2012] Source 121 is offset by 4.947544 and 0.076450 pixels which is larger than
2 X fitted extent = 1.541641 x 1.541641, not incorporating fit results
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 2
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Wed Mar 21 07:06:27 2012] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.986
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 13.92"
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src36.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src36.csv
[Wed Mar 21 18:08:58 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Mar 21 18:08:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src36.csv
[Wed Mar 21 18:08:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Mar 21 18:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Mar 21 18:09:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Mar 21 18:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Mar 21 18:09:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 36 centroid is now closest to src. 9
[Wed Mar 21 18:10:42 2012] Source 121 is offset by 4.947544 and 0.076450 pixels which is larger than
2 X fitted extent = 1.541641 x 1.541641, not incorporating fit results
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:07 2012] XMMSAS src. selection expression = ellipse(27859.418304, 43791.633148, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src121_src.reg
[Thu Mar 22 01:08:07 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (283, 466) - (358, 541)
[Thu Mar 22 01:08:07 2012] XMMSAS bgd. selection expression = annulus(27859.418304, 43791.633148, 1087.500000, 2175.000000, X, Y) && !ellipse(29454.703278, 42325.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.615417, 43186.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29509.577000, 42852.852000, 1666.136048, 361.772810, 97.772610, X, Y) && !ellipse(27552.602000, 42040.740000, 731.960821, 731.960821, 0.000000, X, Y) && !ellipse(27539.135080, 41575.131800, 2064.720059, 551.681616, 89.464828, X, Y) && !ellipse(27550.814000, 41277.674000, 959.968028, 959.968028, 0.000000, X, Y) && !ellipse(26386.767800, 41739.979400, 1070.800031, 1070.800031, 0.000000, X, Y) && !ellipse(26457.280600, 42892.714000, 927.688027, 927.688027, 0.000000, X, Y) && !ellipse(26495.381534, 40804.404170, 2616.400075, 631.191732, 90.002999, X, Y) && !ellipse(26619.373596, 43805.534882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.578491, 42052.857117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.984400, 43214.341440, 473.058414, 473.058414, 0.000000, X, Y) && !ellipse(24978.153961, 42819.337524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.029600, 43413.196000, 2157.224062, 1135.456033, 95.455470, X, Y) && !ellipse(24915.731567, 41015.778778, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:07 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src121.gif
[Thu Mar 22 01:23:31 2012] Mean detx,y = (257.92, 16159.32) 
[Thu Mar 22 01:23:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:24:00 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:24:00 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src121_src_b10.pi.gz
[Thu Mar 22 01:24:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src121_bgd.pi.gz
[Thu Mar 22 03:17:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 22 03:17:26 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:32 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:32 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src121_src_b10.pi.gz
[Thu Mar 22 05:08:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:37 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src121.arf
[Thu Mar 22 05:08:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:37 2012] Updating source flux to 6.4e-13
[Thu Mar 22 05:15:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting