[Mon Mar 19 14:27:37 2012] Detection parameters:
  Position = (415.1, 229.5) = 18 19 58.70 -14 40 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 9.1
  Background counts = 11.7
  Rate = 0.007 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 9.83'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.088
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 11.34"
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src87.ximg exists
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src87_1.ximg exists
[Tue Mar 20 15:36:00 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src87 appears to have run properly
[Tue Mar 20 15:36:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Tue Mar 20 15:36:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src87.csv
[Tue Mar 20 15:36:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Tue Mar 20 15:36:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src87.csv
[Tue Mar 20 15:36:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:39 2012] Source 113 is offset by -6.223347 and 0.896443 pixels which is larger than
2 X fitted extent = 1.392805 x 1.392805, not incorporating fit results
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 87 centroid is now closest to src. 114
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.088
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 11.34"
[Wed Mar 21 18:09:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src79.ximg exists
[Wed Mar 21 18:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src79.csv
[Wed Mar 21 18:09:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src79_1.ximg exists
[Wed Mar 21 18:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src79.csv
[Wed Mar 21 18:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:05 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Wed Mar 21 18:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src79.csv
[Wed Mar 21 18:09:05 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Wed Mar 21 18:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src79.csv
[Wed Mar 21 18:09:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 79 centroid is now closest to src. 116
[Wed Mar 21 18:10:42 2012] Source 113 is offset by -3.122312 and 0.795408 pixels which is larger than
2 X fitted extent = 1.532064 x 12.256552, not incorporating fit results
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:09 2012] XMMSAS src. selection expression = ellipse(36068.176819, 19921.382507, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 01:08:09 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src113_src.reg
[Thu Mar 22 01:08:09 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (378, 192) - (453, 267)
[Thu Mar 22 01:08:09 2012] XMMSAS bgd. selection expression = annulus(36068.176819, 19921.382507, 1087.500000, 2175.000000, X, Y) && !ellipse(34780.840600, 21176.123400, 494.476814, 494.476814, 0.000000, X, Y) && !ellipse(34984.912600, 22048.775308, 417.781612, 417.781612, 0.000000, X, Y) && !ellipse(39034.479095, 18494.148941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36155.148400, 18041.435800, 1199.336035, 1199.336035, 0.000000, X, Y) && !ellipse(35973.583435, 18291.955185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39501.232000, 18188.636200, 2092.480060, 432.504812, 34.858000, X, Y) && !ellipse(33835.932000, 22165.716000, 475.872014, 475.872014, 0.000000, X, Y) && !ellipse(37734.289200, 18756.572000, 1084.200031, 1084.200031, 0.000000, X, Y) && !ellipse(35265.763245, 20800.908752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35446.320000, 18685.098000, 1501.792043, 626.592818, 224.564000, X, Y) && !ellipse(33289.837341, 22825.888977, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:09 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src113.gif
[Thu Mar 22 01:47:45 2012] Mean detx,y = (-9210.78, -7250.56) 
[Thu Mar 22 01:47:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:48:12 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:48:13 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src113_src_b10.pi.gz
[Thu Mar 22 01:48:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src113_bgd.pi.gz
[Thu Mar 22 04:42:56 2012] Not generating rmf since there are only 39 counts
[Thu Mar 22 04:42:56 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:35 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:35 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src113_src_b10.pi.gz
[Thu Mar 22 05:08:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:40 2012] Using photon index=1.80, rate=0.00692, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src113.arf
[Thu Mar 22 05:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:40 2012] Updating source flux to 1.3e-13
[Thu Mar 22 05:15:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting