[Mon Mar 19 14:27:37 2012] Detection parameters:
  Position = (405.9, 239.6) = 18 20 1.47 -14 40 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.4 +/- 8.6
  Background counts = 11.7
  Rate = 0.006 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 8.88'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.834
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 10.87"
[Tue Mar 20 15:36:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src94.ximg exists
[Tue Mar 20 15:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src94.csv
[Tue Mar 20 15:36:01 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src94_1.ximg exists
[Tue Mar 20 15:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src94.csv
[Tue Mar 20 15:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Tue Mar 20 15:36:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Tue Mar 20 15:36:04 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src94 appears to have run properly
[Tue Mar 20 15:37:39 2012] Source 111 is offset by -3.394331 and -7.834428 pixels which is larger than
2 X fitted extent = 1.765232 x 1.765232, not incorporating fit results
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 94 centroid is now closest to src. 104
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:39 2012] Source is confused with source 109
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.834
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 10.87"
[Wed Mar 21 18:09:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src85.ximg exists
[Wed Mar 21 18:09:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src85_1.ximg exists
[Wed Mar 21 18:09:00 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src85 appears to have run properly
[Wed Mar 21 18:09:05 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Wed Mar 21 18:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Wed Mar 21 18:09:05 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Wed Mar 21 18:09:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src85.csv
[Wed Mar 21 18:09:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:10:42 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 111 at 15.789778 pixels away
[Wed Mar 21 18:10:42 2012] Warning, spatial fit 85 centroid is now closest to src. 113
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:09 2012] XMMSAS src. selection expression = ellipse(35265.763245, 20800.908752, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 01:08:09 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src111_src.reg
[Thu Mar 22 01:08:09 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (368, 202) - (443, 277)
[Thu Mar 22 01:08:09 2012] XMMSAS bgd. selection expression = annulus(35265.763245, 20800.908752, 1087.500000, 2175.000000, X, Y) && !ellipse(36786.336800, 23329.977200, 598.160017, 598.160017, 0.000000, X, Y) && !ellipse(35836.134000, 24418.040000, 1548.376045, 1548.376045, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(34780.840600, 21176.123400, 494.476814, 494.476814, 0.000000, X, Y) && !ellipse(34984.912600, 22048.775308, 417.781612, 417.781612, 0.000000, X, Y) && !ellipse(36155.148400, 18041.435800, 1199.336035, 1199.336035, 0.000000, X, Y) && !ellipse(35973.583435, 18291.955185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39501.232000, 18188.636200, 2092.480060, 432.504812, 34.858000, X, Y) && !ellipse(33835.932000, 22165.716000, 475.872014, 475.872014, 0.000000, X, Y) && !ellipse(36068.176819, 19921.382507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37734.289200, 18756.572000, 1084.200031, 1084.200031, 0.000000, X, Y) && !ellipse(35446.320000, 18685.098000, 1501.792043, 626.592818, 224.564000, X, Y) && !ellipse(33289.837341, 22825.888977, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:09 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src111.gif
[Thu Mar 22 01:50:27 2012] Mean detx,y = (-8350.70, -6174.02) 
[Thu Mar 22 01:50:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:51:04 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:51:05 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Thu Mar 22 01:51:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src111_bgd.pi.gz
[Thu Mar 22 04:53:56 2012] Not generating rmf since there are only 33 counts
[Thu Mar 22 04:53:56 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:35 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:35 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Thu Mar 22 05:08:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:40 2012] Using photon index=1.80, rate=0.00606, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src111.arf
[Thu Mar 22 05:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:41 2012] Updating source flux to 1.1e-13
[Thu Mar 22 05:15:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting