[Mon Mar 19 14:27:36 2012] Detection parameters:
  Position = (403.0, 253.7) = 18 20 2.34 -14 39 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 11.9
  Background counts = 10.3
  Rate = 0.01 +/- 0.002

[Mon Mar 19 14:27:38 2012] Off-axis axis estimate = 8.25'
[Tue Mar 20 05:26:48 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 05:26:48 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Tue Mar 20 05:26:48 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.051
[Tue Mar 20 05:26:48 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 10.55"
[Tue Mar 20 15:35:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src60.ximg exists
[Tue Mar 20 15:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src60.csv
[Tue Mar 20 15:36:00 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src60_1.ximg exists
[Tue Mar 20 15:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src60.csv
[Tue Mar 20 15:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Tue Mar 20 15:36:03 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Tue Mar 20 15:36:03 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Tue Mar 20 15:37:39 2012] Warning, spatial fit 60 centroid is now closest to src. 111
[Tue Mar 20 15:37:39 2012] Source 104 is offset by -6.130565 and 3.561325 pixels which is larger than
2 X fitted extent = 1.256248 x 1.256248, not incorporating fit results
[Tue Mar 20 15:37:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:39 2012] Assessing source extent using major
[Tue Mar 20 15:37:39 2012] Source does appear to be extended
[Tue Mar 20 15:37:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 07:06:27 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 07:06:27 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Wed Mar 21 07:06:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.051
[Wed Mar 21 07:06:27 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 10.55"
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src54.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src54.csv
[Wed Mar 21 18:08:59 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src54_1.ximg exists
[Wed Mar 21 18:08:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src54.csv
[Wed Mar 21 18:08:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Wed Mar 21 18:09:04 2012] fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Wed Mar 21 18:09:04 2012] Fit fullrun_mos2_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Wed Mar 21 18:10:42 2012] Spatial fit model total counts = 260.249000, observed total counts = 261.000000
[Wed Mar 21 18:10:42 2012] Offset between fit and detection position for source 104 = 0.468542 pixels
[Wed Mar 21 18:10:42 2012] 237.643600 total counts/ 194.673000 bgd. counts: snr = 3.079772
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 0.468542 pixels
  Position = (402.7, 254.0) = 18 20 2.44 -14 39 1.4
  Extent = 5.2 (4.1-6.2)", rotation angle = 0
  Source counts = 43.0 +/- 15.4
  Background counts = 194.7
  Rate = 0.004 +/- 0.001
[Wed Mar 21 18:10:43 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:43 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:43 2012] Source does appear to be extended
[Wed Mar 21 18:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 01:08:08 2012] XMMSAS src. selection expression = ellipse(34984.912600, 22048.775308, 313.336209, 313.336209, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing source region out to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src104_src.reg
[Thu Mar 22 01:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (385, 236) - (421, 272)
[Thu Mar 22 01:08:08 2012] XMMSAS bgd. selection expression = annulus(34984.912600, 22048.775308, 522.227015, 1044.454030, X, Y) && !ellipse(35836.134000, 24418.040000, 1548.376045, 1548.376045, 0.000000, X, Y) && !ellipse(35340.652000, 25615.340000, 3049.816088, 3049.816088, 0.000000, X, Y) && !ellipse(34780.840600, 21176.123400, 494.476814, 494.476814, 0.000000, X, Y) && !ellipse(33835.932000, 22165.716000, 475.872014, 475.872014, 0.000000, X, Y) && !ellipse(35265.763245, 20800.908752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33289.837341, 22825.888977, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 01:08:08 2012] Writing fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src104.gif
[Thu Mar 22 01:33:24 2012] Mean detx,y = (-8062.09, -5092.31) 
[Thu Mar 22 01:33:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 01:33:43 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 01:33:43 2012] Setting source spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Thu Mar 22 01:33:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Thu Mar 22 04:02:27 2012] Not generating rmf since there are only 42 counts
[Thu Mar 22 04:02:27 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:33 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:33 2012] Error reading totcts from fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Thu Mar 22 05:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:38 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos2_xmm0511010101_pi300-10000_pass1_cl_src104.arf
[Thu Mar 22 05:08:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:39 2012] Updating source flux to 7.9e-14
[Thu Mar 22 05:15:35 2012] Flag b found in src. 104 procflags, skipping spectral fitting
[Thu Mar 22 05:15:35 2012] Source 104 has fewer than 100.000000 counts, skipping spectral fitting