[Mon Mar 19 14:27:26 2012] Detection parameters:
  Position = (369.9, 302.1) = 18 20 12.28 -14 35 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 11.3
  Background counts = 10.3
  Rate = 0.007 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 5.19'
[Mon Mar 19 22:58:41 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:41 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Mon Mar 19 22:58:41 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.943
[Mon Mar 19 22:58:41 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.02"
[Tue Mar 20 05:26:44 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src24.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src24.csv
[Tue Mar 20 05:26:44 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src24.csv
[Tue Mar 20 05:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:46 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Mar 20 05:26:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue Mar 20 05:26:46 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Mar 20 05:26:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue Mar 20 05:26:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:09 2012] Spatial fit model total counts = 174.402000, observed total counts = 205.000000
[Tue Mar 20 15:37:09 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 15:37:09 2012] Source 60 is offset by -2.873441 and 4.819723 pixels which is larger than
2 X fitted extent = 1.072074 x 1.072074, not incorporating fit results
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 00:51:14 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Wed Mar 21 00:51:14 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.943
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.02"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src21.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src21.csv
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src21.csv
[Wed Mar 21 07:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Mar 21 07:06:25 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Mar 21 18:10:10 2012] Spatial fit model total counts = 202.396000, observed total counts = 205.000000
[Wed Mar 21 18:10:10 2012] Offset between fit and detection position for source 60 = 6.242469 pixels
[Wed Mar 21 18:10:10 2012] 196.128010 total counts/ 4.588010 bgd. counts: snr = 89.422603
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 6.242469 pixels
  Position = (366.4, 307.3) = 18 20 13.31 -14 35 9.7
  Extent = 18.0 (17.1-36.1)", rotation angle = 0
  Source counts = 191.5 +/- 14.0
  Background counts = 4.6
  Rate = 0.02 +/- 0.001
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:10:10 2012] Source is confused with source 56
[Wed Mar 21 22:54:45 2012] XMMSAS src. selection expression = ellipse(31831.890000, 26685.050000, 1082.676031, 1082.676031, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src60_src.reg
[Wed Mar 21 22:54:45 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (304, 245) - (429, 370)
[Wed Mar 21 22:54:45 2012] XMMSAS bgd. selection expression = annulus(31831.890000, 26685.050000, 1804.460052, 3608.920104, X, Y) && !ellipse(35790.991100, 25408.240600, 1339.672039, 1339.672039, 0.000000, X, Y) && !ellipse(31501.178200, 27225.225000, 451.318413, 451.318413, 0.000000, X, Y) && !ellipse(33468.329651, 29458.887604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32466.270000, 30423.610000, 1558.184045, 1558.184045, 0.000000, X, Y) && !ellipse(34444.442000, 26858.536000, 261.616008, 261.616008, 0.000000, X, Y) && !ellipse(35984.229400, 25242.822000, 1683.416048, 1683.416048, 0.000000, X, Y) && !ellipse(35518.130000, 21745.410000, 1623.176047, 1623.176047, 0.000000, X, Y) && !ellipse(30757.222000, 28436.594000, 1290.576037, 1290.576037, 0.000000, X, Y) && !ellipse(32857.606537, 29777.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29730.728088, 30666.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34894.100000, 26740.566000, 2148.248062, 2148.248062, 0.000000, X, Y) && !ellipse(34127.860168, 28200.791351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30170.220000, 29690.574000, 995.224029, 995.224029, 0.000000, X, Y) && !ellipse(30488.489380, 29261.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.785828, 27488.813385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34626.469360, 27518.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32707.566800, 22339.126800, 755.544022, 755.544022, 0.000000, X, Y) && !ellipse(33478.302000, 28634.090000, 473.167214, 473.167214, 0.000000, X, Y) && !ellipse(32837.308838, 25223.446808, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src60.gif
[Wed Mar 21 23:06:16 2012] Mean detx,y = (-378.23, 4483.60) 
[Wed Mar 21 23:06:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:06:50 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:06:50 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Mar 21 23:06:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Thu Mar 22 05:08:23 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:23 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu Mar 22 05:08:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:27 2012] Using photon index=1.80, rate=0.0176, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src60.arf
[Thu Mar 22 05:08:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:27 2012] Updating source flux to 1.8e-13
[Thu Mar 22 05:08:46 2012] Flag b found in src. 60 procflags, skipping spectral fitting
[Thu Mar 22 05:08:46 2012] Flag p found in src. 60 procflags, skipping spectral fitting
[Thu Mar 22 05:08:46 2012] Flag c found in src. 60 procflags, skipping spectral fitting