[Mon Mar 19 14:27:26 2012] Detection parameters:
  Position = (396.0, 309.5) = 18 20 4.46 -14 34 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.6 +/- 10.1
  Background counts = 9.2
  Rate = 0.008 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 7.12'
[Mon Mar 19 22:58:41 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:41 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Mon Mar 19 22:58:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Mon Mar 19 22:58:41 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.99"
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src17.csv
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src17.csv
[Tue Mar 20 05:26:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Mar 20 05:26:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:09 2012] Spatial fit model total counts = 262.172000, observed total counts = 214.000000
[Tue Mar 20 15:37:09 2012] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 15:37:09 2012] Spatial fit model total counts = 205.390000, observed total counts = 213.000000
[Tue Mar 20 15:37:09 2012] Offset between fit and detection position for source 57 = 0.566810 pixels
[Tue Mar 20 15:37:09 2012] Warning, changing simple spatial fit ID from 17 to 40
[Tue Mar 20 15:37:09 2012] 210.798300 total counts/ 186.956000 bgd. counts: snr = 1.743727
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.566810 pixels
  Position = (396.5, 309.3) = 18 20 4.31 -14 35 0.9
  Extent = 3.3 (2.5-5.1)", rotation angle = 0
  Source counts = 23.8 +/- 14.5
  Background counts = 187.0
  Rate = 0.002 +/- 0.001
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 00:51:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 3.27"
[Wed Mar 21 00:51:14 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.436
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 3.27"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src16.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src16.csv
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src16.csv
[Wed Mar 21 07:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Mar 21 07:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Mar 21 07:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Mar 21 07:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:10:10 2012] Warning, spatial fit 16 centroid is now closest to src. 54
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:10:10 2012] Source is confused with source 59
[Wed Mar 21 22:54:45 2012] XMMSAS src. selection expression = ellipse(34444.442000, 26858.536000, 196.212006, 196.212006, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src57_src.reg
[Wed Mar 21 22:54:45 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (385, 298) - (408, 321)
[Wed Mar 21 22:54:45 2012] XMMSAS bgd. selection expression = annulus(34444.442000, 26858.536000, 327.020009, 654.040019, X, Y) && !ellipse(35790.991100, 25408.240600, 1339.672039, 1339.672039, 0.000000, X, Y) && !ellipse(35984.229400, 25242.822000, 1683.416048, 1683.416048, 0.000000, X, Y) && !ellipse(34894.100000, 26740.566000, 2148.248062, 2148.248062, 0.000000, X, Y) && !ellipse(34127.860168, 28200.791351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.785828, 27488.813385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34626.469360, 27518.124908, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src57.gif
[Wed Mar 21 23:01:45 2012] Mean detx,y = (-98.07, 7097.29) 
[Wed Mar 21 23:01:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:02:01 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:02:01 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed Mar 21 23:02:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Wed Mar 21 23:50:56 2012] Not generating rmf since there are only 23 counts
[Wed Mar 21 23:50:56 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:22 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:22 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Mar 22 05:08:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:26 2012] Using photon index=1.80, rate=0.00219, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src57.arf
[Thu Mar 22 05:08:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:26 2012] Updating source flux to 4.4e-14
[Thu Mar 22 05:08:46 2012] Flag p found in src. 57 procflags, skipping spectral fitting
[Thu Mar 22 05:08:46 2012] Flag c found in src. 57 procflags, skipping spectral fitting
[Thu Mar 22 05:08:46 2012] Source 57 has fewer than 100.000000 counts, skipping spectral fitting