[Mon Mar 19 14:27:25 2012] Detection parameters:
  Position = (357.3, 322.9) = 18 20 16.06 -14 34 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.0 +/- 11.5
  Background counts = 12.4
  Rate = 0.007 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 4.62'
[Mon Mar 19 22:58:42 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:42 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Mon Mar 19 22:58:42 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Mon Mar 19 22:58:42 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.74"
[Tue Mar 20 05:26:44 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src31.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src31.csv
[Tue Mar 20 05:26:44 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src31.csv
[Tue Mar 20 05:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:46 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Mar 20 05:26:46 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Mar 20 05:26:46 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Mar 20 15:37:09 2012] Spatial fit model total counts = 225.231000, observed total counts = 222.000000
[Tue Mar 20 15:37:09 2012] Offset between fit and detection position for source 53 = 5.496160 pixels
[Tue Mar 20 15:37:09 2012] 223.244200 total counts/ 34.953200 bgd. counts: snr = 31.848288
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 5.496160 pixels
  Position = (354.1, 327.4) = 18 20 17.02 -14 33 42.1
  Extent = 16.1 (16.1-16.2)", rotation angle = 0
  Source counts = 188.3 +/- 14.9
  Background counts = 35.0
  Rate = 0.02 +/- 0.001
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:09 2012] Source is confused with source 50
[Wed Mar 21 00:51:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 16.13"
[Wed Mar 21 00:51:14 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.016
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 16.13"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src27.csv
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src27.csv
[Wed Mar 21 07:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:26 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Mar 21 07:06:26 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Mar 21 07:06:26 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Mar 21 18:10:10 2012] Source 53 is offset by -3.798805 and 5.698253 pixels which is larger than
2 X fitted extent = 5.496276 x 5.496276, not incorporating fit results
[Wed Mar 21 18:10:10 2012] Source 53 is offset by -3.883977 and -3.612391 pixels which is larger than
2 X fitted extent = 1.434092 x 1.434092, not incorporating fit results
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:54:46 2012] XMMSAS src. selection expression = ellipse(30757.222000, 28436.594000, 967.932028, 967.932028, 0.000000, X, Y)
[Wed Mar 21 22:54:46 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src53_src.reg
[Wed Mar 21 22:54:46 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (298, 272) - (410, 383)
[Wed Mar 21 22:54:46 2012] XMMSAS bgd. selection expression = annulus(30757.222000, 28436.594000, 1613.220046, 3226.440093, X, Y) && !ellipse(26968.135590, 27611.287231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31996.450439, 31667.173706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31501.178200, 27225.225000, 451.318413, 451.318413, 0.000000, X, Y) && !ellipse(33468.329651, 29458.887604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32466.270000, 30423.610000, 1558.184045, 1558.184045, 0.000000, X, Y) && !ellipse(31043.318000, 34300.188000, 2866.752082, 2866.752082, 0.000000, X, Y) && !ellipse(31831.890000, 26685.050000, 1443.568042, 1443.568042, 0.000000, X, Y) && !ellipse(29255.810000, 32230.516000, 965.952028, 965.952028, 0.000000, X, Y) && !ellipse(32857.606537, 29777.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29730.728088, 30666.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34894.100000, 26740.566000, 2148.248062, 2148.248062, 0.000000, X, Y) && !ellipse(34127.860168, 28200.791351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31972.555540, 32050.240000, 1105.344032, 1105.344032, 0.000000, X, Y) && !ellipse(30170.220000, 29690.574000, 995.224029, 995.224029, 0.000000, X, Y) && !ellipse(30488.489380, 29261.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.785828, 27488.813385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34626.469360, 27518.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33478.302000, 28634.090000, 473.167214, 473.167214, 0.000000, X, Y) && !ellipse(32837.308838, 25223.446808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27300.631600, 31974.933800, 1626.736047, 203.341606, 72.632266, X, Y)
[Wed Mar 21 22:54:46 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src53.gif
[Wed Mar 21 23:10:05 2012] Mean detx,y = (1300.43, 3413.89) 
[Wed Mar 21 23:10:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:10:23 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:10:23 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed Mar 21 23:10:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Thu Mar 22 05:08:23 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:23 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Thu Mar 22 05:08:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:27 2012] Using photon index=1.80, rate=0.0173, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src53.arf
[Thu Mar 22 05:08:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:27 2012] Updating source flux to 1.7e-13
[Thu Mar 22 05:08:46 2012] Flag b found in src. 53 procflags, skipping spectral fitting
[Thu Mar 22 05:08:46 2012] Flag c found in src. 53 procflags, skipping spectral fitting