[Mon Mar 19 14:27:25 2012] Detection parameters:
  Position = (385.3, 339.2) = 18 20 7.68 -14 32 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.7 +/- 10.8
  Background counts = 9.6
  Rate = 0.008 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 6.95'
[Mon Mar 19 22:58:40 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:40 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Mon Mar 19 22:58:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.167
[Mon Mar 19 22:58:40 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.90"
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src15.csv
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src15.csv
[Tue Mar 20 05:26:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Mar 20 05:26:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:09 2012] Warning, spatial fit 15 centroid is now closest to src. 46
[Tue Mar 20 15:37:09 2012] Spatial fit model total counts = 261.892000, observed total counts = 197.000000
[Tue Mar 20 15:37:09 2012] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 00:51:14 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Wed Mar 21 00:51:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.167
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.90"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src14.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src14.csv
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src14.csv
[Wed Mar 21 07:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Mar 21 07:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Mar 21 07:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Mar 21 07:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 18:10:10 2012] Spatial fit model total counts = 290.818000, observed total counts = 242.000000
[Wed Mar 21 18:10:10 2012] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 21 18:10:10 2012] Source 49 is offset by -1.869889 and -4.713821 pixels which is larger than
2 X fitted extent = 1.140101 x 1.140101, not incorporating fit results
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:54:45 2012] XMMSAS src. selection expression = ellipse(33468.329651, 29458.887604, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src49_src.reg
[Wed Mar 21 22:54:45 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (348, 302) - (423, 377)
[Wed Mar 21 22:54:45 2012] XMMSAS bgd. selection expression = annulus(33468.329651, 29458.887604, 1087.500000, 2175.000000, X, Y) && !ellipse(31996.450439, 31667.173706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31501.178200, 27225.225000, 451.318413, 451.318413, 0.000000, X, Y) && !ellipse(32466.270000, 30423.610000, 1558.184045, 1558.184045, 0.000000, X, Y) && !ellipse(31043.318000, 34300.188000, 2866.752082, 2866.752082, 0.000000, X, Y) && !ellipse(31831.890000, 26685.050000, 1443.568042, 1443.568042, 0.000000, X, Y) && !ellipse(30757.222000, 28436.594000, 1290.576037, 1290.576037, 0.000000, X, Y) && !ellipse(32857.606537, 29777.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34894.100000, 26740.566000, 2148.248062, 2148.248062, 0.000000, X, Y) && !ellipse(34127.860168, 28200.791351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31972.555540, 32050.240000, 1105.344032, 1105.344032, 0.000000, X, Y) && !ellipse(30488.489380, 29261.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.785828, 27488.813385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34626.469360, 27518.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33478.302000, 28634.090000, 473.167214, 473.167214, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src49.gif
[Wed Mar 21 23:00:38 2012] Mean detx,y = (2420.70, 5861.24) 
[Wed Mar 21 23:00:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:01:00 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:01:01 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Mar 21 23:01:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Mar 21 23:45:54 2012] Not generating rmf since there are only 70 counts
[Wed Mar 21 23:45:54 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:22 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:22 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Mar 22 05:08:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:26 2012] Using photon index=1.80, rate=0.00845, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src49.arf
[Thu Mar 22 05:08:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:26 2012] Updating source flux to 1.2e-13
[Thu Mar 22 05:08:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting