[Mon Mar 19 14:27:25 2012] Detection parameters:
  Position = (378.2, 352.4) = 18 20 9.80 -14 31 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 10.1
  Background counts = 10.1
  Rate = 0.008 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 6.98'
[Mon Mar 19 22:58:40 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:41 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Mon Mar 19 22:58:41 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.809
[Mon Mar 19 22:58:41 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.92"
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src16.csv
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src16.csv
[Tue Mar 20 05:26:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Mar 20 05:26:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 15:37:09 2012] Warning, spatial fit 16 centroid is now closest to src. 42
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 00:51:14 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Wed Mar 21 00:51:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.809
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.92"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src15.csv
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src15.csv
[Wed Mar 21 07:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Mar 21 07:06:25 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Mar 21 18:10:10 2012] Warning, spatial fit 15 centroid is now closest to src. 49
[Wed Mar 21 18:10:10 2012] Spatial fit model total counts = 268.174000, observed total counts = 285.000000
[Wed Mar 21 18:10:10 2012] Offset between fit and detection position for source 44 = 4.933936 pixels
[Wed Mar 21 18:10:10 2012] Warning, changing simple spatial fit ID from 15 to 28
[Wed Mar 21 18:10:10 2012] 272.022500 total counts/ 89.318500 bgd. counts: snr = 19.332025
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 4.933936 pixels
  Position = (373.7, 350.3) = 18 20 11.13 -14 32 2.7
  Extent = 19.5 (19.4-39.0)", rotation angle = 0
  Source counts = 182.7 +/- 16.5
  Background counts = 89.3
  Rate = 0.02 +/- 0.002
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 18:10:10 2012] Source is confused with source 47
[Wed Mar 21 22:54:45 2012] XMMSAS src. selection expression = ellipse(32466.270000, 30423.610000, 1168.638034, 1168.638034, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src44_src.reg
[Wed Mar 21 22:54:45 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (307, 283) - (441, 417)
[Wed Mar 21 22:54:45 2012] XMMSAS bgd. selection expression = annulus(32466.270000, 30423.610000, 1947.730056, 3895.460112, X, Y) && !ellipse(31320.679108, 34932.381836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30855.082550, 34680.114227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31561.970000, 33401.370000, 1683.416048, 1683.416048, 0.000000, X, Y) && !ellipse(28918.626312, 33277.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31996.450439, 31667.173706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35790.991100, 25408.240600, 1339.672039, 1339.672039, 0.000000, X, Y) && !ellipse(31501.178200, 27225.225000, 451.318413, 451.318413, 0.000000, X, Y) && !ellipse(33468.329651, 29458.887604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34444.442000, 26858.536000, 261.616008, 261.616008, 0.000000, X, Y) && !ellipse(35984.229400, 25242.822000, 1683.416048, 1683.416048, 0.000000, X, Y) && !ellipse(31043.318000, 34300.188000, 2866.752082, 2866.752082, 0.000000, X, Y) && !ellipse(31831.890000, 26685.050000, 1443.568042, 1443.568042, 0.000000, X, Y) && !ellipse(29255.810000, 32230.516000, 965.952028, 965.952028, 0.000000, X, Y) && !ellipse(30757.222000, 28436.594000, 1290.576037, 1290.576037, 0.000000, X, Y) && !ellipse(32857.606537, 29777.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29730.728088, 30666.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.652400, 32552.674000, 714.632021, 714.632021, 0.000000, X, Y) && !ellipse(34894.100000, 26740.566000, 2148.248062, 2148.248062, 0.000000, X, Y) && !ellipse(34127.860168, 28200.791351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31972.555540, 32050.240000, 1105.344032, 1105.344032, 0.000000, X, Y) && !ellipse(28477.583466, 34419.355835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30170.220000, 29690.574000, 995.224029, 995.224029, 0.000000, X, Y) && !ellipse(30488.489380, 29261.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.785828, 27488.813385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34626.469360, 27518.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33478.302000, 28634.090000, 473.167214, 473.167214, 0.000000, X, Y) && !ellipse(27300.631600, 31974.933800, 1626.736047, 203.341606, 72.632266, X, Y)
[Wed Mar 21 22:54:45 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src44.gif
[Wed Mar 21 23:01:05 2012] Mean detx,y = (3392.97, 5135.20) 
[Wed Mar 21 23:01:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:01:41 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:01:42 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Mar 21 23:01:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu Mar 22 05:08:22 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:22 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Mar 22 05:08:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:26 2012] Using photon index=1.80, rate=0.0168, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src44.arf
[Thu Mar 22 05:08:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:26 2012] Updating source flux to 1.9e-13
[Thu Mar 22 05:08:46 2012] Flag c found in src. 44 procflags, skipping spectral fitting