[Mon Mar 19 14:27:24 2012] Detection parameters:
  Position = (365.8, 371.2) = 18 20 13.51 -14 30 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 10.4
  Background counts = 11.3
  Rate = 0.006 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 7.19'
[Mon Mar 19 22:58:43 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:43 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Mon Mar 19 22:58:43 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.144
[Mon Mar 19 22:58:43 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 10.02"
[Tue Mar 20 05:26:44 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src43.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src43.csv
[Tue Mar 20 05:26:44 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src43.csv
[Tue Mar 20 05:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:46 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Mar 20 05:26:46 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Mar 20 05:26:46 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Mar 20 15:37:09 2012] Spatial fit model total counts = 262.709000, observed total counts = 273.000000
[Tue Mar 20 15:37:09 2012] Offset between fit and detection position for source 38 = 3.250378 pixels
[Tue Mar 20 15:37:09 2012] Warning, changing simple spatial fit ID from 43 to 12
[Tue Mar 20 15:37:09 2012] 257.747700 total counts/ 12.544700 bgd. counts: snr = 69.230208
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 3.250378 pixels
  Position = (367.8, 368.7) = 18 20 12.90 -14 30 42.7
  Extent = 16.7 (15.7-17.5)", rotation angle = 0
  Source counts = 245.2 +/- 16.1
  Background counts = 12.5
  Rate = 0.02 +/- 0.001
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:09 2012] Source is confused with source 42
[Wed Mar 21 00:51:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 16.73"
[Wed Mar 21 00:51:14 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.072
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 16.73"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src37.ximg exists
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Mar 21 07:06:24 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src37 appears to have run properly
[Wed Mar 21 07:06:26 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Mar 21 07:06:26 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Mar 21 07:06:26 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed Mar 21 18:10:10 2012] Spatial fit model total counts = 273.038000, observed total counts = 273.000000
[Wed Mar 21 18:10:10 2012] Offset between fit and detection position for source 38 = 0.369944 pixels
[Wed Mar 21 18:10:10 2012] Warning, changing simple spatial fit ID from 37 to 11
[Wed Mar 21 18:10:10 2012] 188.193500 total counts/ 62.520500 bgd. counts: snr = 15.893910
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.369944 pixels
  Position = (368.1, 369.0) = 18 20 12.83 -14 30 41.4
  Extent = 13.8 (11.1-18.6)", rotation angle = 0
  Source counts = 125.7 +/- 13.7
  Background counts = 62.5
  Rate = 0.01 +/- 0.001
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:54:46 2012] XMMSAS src. selection expression = ellipse(31972.555540, 32050.240000, 829.008024, 829.008024, 0.000000, X, Y)
[Wed Mar 21 22:54:46 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src38_src.reg
[Wed Mar 21 22:54:46 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (320, 321) - (416, 417)
[Wed Mar 21 22:54:46 2012] XMMSAS bgd. selection expression = annulus(31972.555540, 32050.240000, 1381.680040, 2763.360080, X, Y) && !ellipse(31320.679108, 34932.381836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30855.082550, 34680.114227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31561.970000, 33401.370000, 1683.416048, 1683.416048, 0.000000, X, Y) && !ellipse(30685.057129, 35203.569183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.626312, 33277.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31996.450439, 31667.173706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33468.329651, 29458.887604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32466.270000, 30423.610000, 1558.184045, 1558.184045, 0.000000, X, Y) && !ellipse(31043.318000, 34300.188000, 2866.752082, 2866.752082, 0.000000, X, Y) && !ellipse(29255.810000, 32230.516000, 965.952028, 965.952028, 0.000000, X, Y) && !ellipse(30757.222000, 28436.594000, 1290.576037, 1290.576037, 0.000000, X, Y) && !ellipse(32857.606537, 29777.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29730.728088, 30666.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.652400, 32552.674000, 714.632021, 714.632021, 0.000000, X, Y) && !ellipse(28477.583466, 34419.355835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30170.220000, 29690.574000, 995.224029, 995.224029, 0.000000, X, Y) && !ellipse(30488.489380, 29261.528656, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 22:54:46 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src38.gif
[Wed Mar 21 23:15:21 2012] Mean detx,y = (4990.22, 4433.73) 
[Wed Mar 21 23:15:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:16:06 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:16:06 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 21 23:16:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Mar 22 05:08:23 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:23 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Mar 22 05:08:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:28 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src38.arf
[Thu Mar 22 05:08:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:28 2012] Updating source flux to 1.4e-13
[Thu Mar 22 05:08:46 2012] Flag c found in src. 38 procflags, skipping spectral fitting