[Mon Mar 19 14:27:24 2012] Detection parameters:
  Position = (361.1, 392.4) = 18 20 14.93 -14 29 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.3 +/- 9.8
  Background counts = 8.3
  Rate = 0.007 +/- 0.001

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 8.19'
[Mon Mar 19 22:58:41 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:41 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Mon Mar 19 22:58:41 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.851
[Mon Mar 19 22:58:41 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.52"
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src23.ximg exists
[Tue Mar 20 05:26:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src23.csv
[Tue Mar 20 05:26:43 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Mar 20 05:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src23.csv
[Tue Mar 20 05:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Mar 20 05:26:46 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Mar 20 15:37:08 2012] Source 32 is offset by -3.700570 and 2.144784 pixels which is larger than
2 X fitted extent = 1.220749 x 1.220749, not incorporating fit results
[Tue Mar 20 15:37:09 2012] Warning, spatial fit 23 centroid is now closest to src. 34
[Tue Mar 20 15:37:09 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.058439 pixels away
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:09 2012] Source is confused with source 34
[Wed Mar 21 00:51:14 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Wed Mar 21 00:51:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.851
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.52"
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src20.csv
[Wed Mar 21 07:06:24 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Mar 21 07:06:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src20.csv
[Wed Mar 21 07:06:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Mar 21 07:06:25 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Mar 21 18:10:10 2012] Source 32 is offset by -3.700570 and 2.144784 pixels which is larger than
2 X fitted extent = 1.220749 x 1.220749, not incorporating fit results
[Wed Mar 21 18:10:10 2012] Spatial fit model total counts = 602.277000, observed total counts = 588.000000
[Wed Mar 21 18:10:10 2012] Offset between fit and detection position for source 32 = 4.418812 pixels
[Wed Mar 21 18:10:10 2012] Warning, changing simple spatial fit ID from 20 to 7
[Wed Mar 21 18:10:10 2012] 531.903300 total counts/ 53.010300 bgd. counts: snr = 65.774622
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.418812 pixels
  Position = (357.4, 394.8) = 18 20 16.04 -14 28 48.9
  Extent = 35.8 (34.3-36.6)", rotation angle = 0
  Source counts = 478.9 +/- 23.1
  Background counts = 53.0
  Rate = 0.04 +/- 0.002
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:54:45 2012] XMMSAS src. selection expression = ellipse(31043.318000, 34300.188000, 2150.064062, 2150.064062, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src32_src.reg
[Wed Mar 21 22:54:45 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (234, 271) - (481, 518)
[Wed Mar 21 22:54:45 2012] XMMSAS bgd. selection expression = annulus(31043.318000, 34300.188000, 3583.440103, 7166.880206, X, Y) && !ellipse(26968.135590, 27611.287231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31320.679108, 34932.381836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30741.858826, 36151.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30855.082550, 34680.114227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28293.280000, 35114.526400, 559.063216, 559.063216, 0.000000, X, Y) && !ellipse(31561.970000, 33401.370000, 1683.416048, 1683.416048, 0.000000, X, Y) && !ellipse(30685.057129, 35203.569183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.626312, 33277.937500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31996.450439, 31667.173706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31501.178200, 27225.225000, 451.318413, 451.318413, 0.000000, X, Y) && !ellipse(33468.329651, 29458.887604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32466.270000, 30423.610000, 1558.184045, 1558.184045, 0.000000, X, Y) && !ellipse(28177.520020, 35792.760010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31831.890000, 26685.050000, 1443.568042, 1443.568042, 0.000000, X, Y) && !ellipse(29255.810000, 32230.516000, 965.952028, 965.952028, 0.000000, X, Y) && !ellipse(27634.865320, 40711.710800, 642.676818, 642.676818, 0.000000, X, Y) && !ellipse(30757.222000, 28436.594000, 1290.576037, 1290.576037, 0.000000, X, Y) && !ellipse(32857.606537, 29777.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29730.728088, 30666.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.652400, 32552.674000, 714.632021, 714.632021, 0.000000, X, Y) && !ellipse(34894.100000, 26740.566000, 2148.248062, 2148.248062, 0.000000, X, Y) && !ellipse(34127.860168, 28200.791351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31972.555540, 32050.240000, 1105.344032, 1105.344032, 0.000000, X, Y) && !ellipse(28477.583466, 34419.355835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30170.220000, 29690.574000, 995.224029, 995.224029, 0.000000, X, Y) && !ellipse(26568.949280, 34245.608063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.489380, 29261.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.785828, 27488.813385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34626.469360, 27518.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.017000, 43526.756000, 2197.104063, 563.053616, 91.447010, X, Y) && !ellipse(25782.523000, 40428.879800, 639.516818, 639.516818, 0.000000, X, Y) && !ellipse(25771.520486, 41852.546846, 2486.656072, 431.435362, 90.020109, X, Y) && !ellipse(27637.861600, 41867.428000, 481.784014, 481.784014, 0.000000, X, Y) && !ellipse(33478.302000, 28634.090000, 473.167214, 473.167214, 0.000000, X, Y) && !ellipse(26359.095764, 35184.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.444600, 42700.510000, 1613.912046, 1613.912046, 0.000000, X, Y) && !ellipse(26392.567719, 34681.372711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26821.846130, 33552.539215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.656040, 40166.534000, 712.420820, 712.420820, 0.000000, X, Y) && !ellipse(27300.631600, 31974.933800, 1626.736047, 203.341606, 72.632266, X, Y) && !ellipse(24496.215200, 42265.758000, 1016.720029, 1016.720029, 0.000000, X, Y)
[Wed Mar 21 22:54:45 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src32.gif
[Wed Mar 21 23:03:59 2012] Mean detx,y = (7272.05, 3458.54) 
[Wed Mar 21 23:04:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:06:11 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:06:11 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Mar 21 23:06:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Mar 22 05:08:23 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:23 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Mar 22 05:08:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:26 2012] Using photon index=1.80, rate=0.044, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src32.arf
[Thu Mar 22 05:08:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:27 2012] Updating source flux to 5.5e-13
[Thu Mar 22 05:08:46 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Thu Mar 22 05:08:46 2012] Flag c found in src. 32 procflags, skipping spectral fitting