[Mon Mar 19 14:27:22 2012] Detection parameters:
  Position = (283.2, 501.0) = 18 20 38.26 -14 21 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.0 +/- 9.8
  Background counts = 5.8
  Rate = 0.004 +/- 0.0009

[Mon Mar 19 14:27:28 2012] Off-axis axis estimate = 14.73'
[Mon Mar 19 22:58:43 2012] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Mon Mar 19 22:58:43 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Mon Mar 19 22:58:43 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.188
[Mon Mar 19 22:58:43 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 13.79"
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src71.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src71.csv
[Tue Mar 20 05:26:45 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src71_1.ximg exists
[Tue Mar 20 05:26:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src71.csv
[Tue Mar 20 05:26:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 05:26:47 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Tue Mar 20 05:26:47 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Tue Mar 20 05:26:47 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Tue Mar 20 15:37:09 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 18.776799 pixels away
[Tue Mar 20 15:37:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 15:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 15:37:09 2012] Assessing source extent using major
[Tue Mar 20 15:37:09 2012] Source does appear to be extended
[Tue Mar 20 15:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 15:37:09 2012] Source is confused with source 16
[Wed Mar 21 00:51:14 2012] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 00:51:14 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Wed Mar 21 00:51:14 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.188
[Wed Mar 21 00:51:14 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 13.79"
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src65.ximg exists
[Wed Mar 21 07:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src65.csv
[Wed Mar 21 07:06:25 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed Mar 21 07:06:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src65.csv
[Wed Mar 21 07:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 07:06:27 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed Mar 21 07:06:27 2012] fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed Mar 21 07:06:27 2012] Fit fullrun_mos1_xmm0511010101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Wed Mar 21 18:10:10 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.014311 pixels away
[Wed Mar 21 18:10:10 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 21.919747 pixels away
[Wed Mar 21 18:10:10 2012] Spatial fit model total counts = 158.619000, observed total counts = 153.000000
[Wed Mar 21 18:10:10 2012] Offset between fit and detection position for source 13 = 1.666277 pixels
[Wed Mar 21 18:10:10 2012] 97.488500 total counts/ 33.394800 bgd. counts: snr = 11.091133
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.666277 pixels
  Position = (282.6, 499.4) = 18 20 38.42 -14 21 14.0
  Extent = 10.6 (8.0-16.5)", rotation angle = 0
  Source counts = 64.1 +/- 9.9
  Background counts = 33.4
  Rate = 0.006 +/- 0.0009
[Wed Mar 21 18:10:10 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 18:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 18:10:10 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 18:10:10 2012] Source does appear to be extended
[Wed Mar 21 18:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 22:54:47 2012] XMMSAS src. selection expression = ellipse(24541.570200, 43398.968200, 634.818018, 634.818018, 0.000000, X, Y)
[Wed Mar 21 22:54:47 2012] Writing source region out to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src13_src.reg
[Wed Mar 21 22:54:47 2012] Extracting stamp from image fullrun_mos1_xmm0511010101_pi300-10000_cl_sm2.00.img.gz, (246, 463) - (319, 536)
[Wed Mar 21 22:54:47 2012] XMMSAS bgd. selection expression = annulus(24541.570200, 43398.968200, 1058.030030, 2116.060061, X, Y) && !ellipse(25773.559600, 42161.702900, 403.886412, 403.886412, 0.000000, X, Y) && !ellipse(25844.017000, 43526.756000, 2197.104063, 563.053616, 91.447010, X, Y) && !ellipse(25771.520486, 41852.546846, 2486.656072, 431.435362, 90.020109, X, Y) && !ellipse(25773.076020, 42376.680000, 714.629621, 714.629621, 0.000000, X, Y) && !ellipse(24488.444600, 42700.510000, 1613.912046, 1613.912046, 0.000000, X, Y) && !ellipse(24496.215200, 42265.758000, 1016.720029, 1016.720029, 0.000000, X, Y)
[Wed Mar 21 22:54:47 2012] Writing fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src13.gif
[Wed Mar 21 23:29:51 2012] Mean detx,y = (16014.19, -3467.17) 
[Wed Mar 21 23:29:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:30:04 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:30:05 2012] Setting source spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Mar 21 23:30:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Mar 22 01:06:32 2012] Not generating rmf since there are only 64 counts
[Thu Mar 22 01:06:32 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:08:25 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:08:25 2012] Error reading totcts from fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Mar 22 05:08:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:08:29 2012] Using photon index=1.80, rate=0.00589, arf fullrun_mos1_xmm0511010101_pi300-10000_pass1_cl_src13.arf
[Thu Mar 22 05:08:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:08:29 2012] Updating source flux to 1.8e-13
[Thu Mar 22 05:08:47 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Thu Mar 22 05:08:47 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting