[Sat Jun 16 05:29:51 2012] Detection parameters:
  Position = (136.1, 249.1) = 17 45 38.38 -29 26 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.0 +/- 8.0
  Background counts = 3.6
  Rate = 0.005 +/- 0.001

[Sat Jun 16 05:29:51 2012] Off-axis axis estimate = 12.30'
[Sat Jun 16 05:49:51 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 05:49:51 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sat Jun 16 05:49:51 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.782
[Sat Jun 16 05:49:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.58"
[Sat Jun 16 06:08:07 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 06:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 06:08:07 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 06:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 06:08:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 06:08:07 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 06:08:07 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 06:08:07 2012] Fit fullrun_mos2_xmm0511001401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 16 06:08:11 2012] Warning, spatial fit 5 centroid is now closest to src. 1
[Sat Jun 16 06:08:11 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 06:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 06:08:11 2012] Assessing source extent using major
[Sat Jun 16 06:08:11 2012] Source does appear to be extended
[Sat Jun 16 06:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 06:08:11 2012] Source is confused with source 2
[Sat Jun 16 06:25:52 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 06:25:52 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sat Jun 16 06:25:52 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.782
[Sat Jun 16 06:25:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.58"
[Sat Jun 16 06:48:26 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 16 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 06:48:26 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 16 06:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 06:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 06:48:26 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 16 06:48:26 2012] fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 16 06:48:26 2012] Fit fullrun_mos2_xmm0511001401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 16 06:48:30 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.615506 pixels away
[Sat Jun 16 06:48:30 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 06:48:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 06:48:30 2012] Assessing source extent using major
[Sat Jun 16 06:48:30 2012] Source does appear to be extended
[Sat Jun 16 06:48:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 06:52:13 2012] XMMSAS src. selection expression = ellipse(11790.088455, 21621.514587, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 16 06:52:13 2012] Writing source region out to fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 16 06:52:13 2012] Extracting stamp from image fullrun_mos2_xmm0511001401_pi300-10000_cl_sm2.00.img.gz, (99, 212) - (174, 287)
[Sat Jun 16 06:52:13 2012] XMMSAS bgd. selection expression = annulus(11790.088455, 21621.514587, 1087.500000, 2175.000000, X, Y) && !ellipse(12385.412000, 21466.728000, 2367.832068, 295.979209, 18.110700, X, Y) && !ellipse(11318.539322, 21596.220123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12494.581894, 20861.005341, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 16 06:52:13 2012] Writing fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4.gif
[Sat Jun 16 06:53:31 2012] Mean detx,y = (15512.54, -5482.85) 
[Sat Jun 16 06:53:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 06:53:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 06:53:42 2012] Setting source spectrum file to fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 16 06:53:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 16 06:54:13 2012] Not generating rmf since there are only 33 counts
[Sat Jun 16 06:54:13 2012] rmf not generated due to insufficient counts
[Sat Jun 16 06:54:32 2012] Updating aperture counts using extracted products
[Sat Jun 16 06:54:32 2012] Error reading totcts from fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 16 06:54:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 06:54:32 2012] Using photon index=1.80, rate=0.00513, arf fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4.arf
[Sat Jun 16 06:54:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 06:54:32 2012] Updating source flux to 1.6e-13
[Sat Jun 16 06:54:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 16 06:54:35 2012] xmm0511001401/analysis//spectral/fullrun_mos2_xmm0511001401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete