[Fri Jul 13 21:27:43 2012] Detection parameters:
  Position = (333.6, 174.3) = 17 46 19.91 -29 31 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 14.3
  Background counts = 43.0
  Rate = 0.01 +/- 0.003

[Fri Jul 13 21:27:44 2012] Off-axis axis estimate = 9.36'
[Fri Jul 13 21:29:45 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 21:29:45 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Fri Jul 13 21:29:45 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.126
[Fri Jul 13 21:29:45 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.11"
[Sat Jul 14 01:01:26 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src45.ximg exists
[Sat Jul 14 01:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src45.csv
[Sat Jul 14 01:01:26 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Jul 14 01:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src45.csv
[Sat Jul 14 01:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 01:01:27 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Jul 14 01:01:27 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Jul 14 01:01:27 2012] Fit fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Jul 14 03:26:47 2012] Spatial fit model total counts = 798.999000, observed total counts = 799.000000
[Sat Jul 14 03:26:47 2012] Offset between fit and detection position for source 45 = 8.230037 pixels
[Sat Jul 14 03:26:47 2012] 788.297000 total counts/ 623.396000 bgd. counts: snr = 6.604520
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 8.230037 pixels
  Position = (325.9, 171.2) = 17 46 22.46 -29 31 47.8
  Extent = 22.2 (8.2-44.4)", rotation angle = 0
  Source counts = 164.9 +/- 28.1
  Background counts = 623.4
  Rate = 0.03 +/- 0.006
[Sat Jul 14 03:26:47 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 03:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 03:26:47 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 03:26:47 2012] Source does appear to be extended
[Sat Jul 14 03:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 03:26:47 2012] Source is confused with source 48
[Sat Jul 14 03:27:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 03:27:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 03:27:02 2012] Initial guess for spatial extent in simple fitting = 22.21"
[Sat Jul 14 03:27:02 2012] source mask rpix=5.1, npix_max = 125, mask sum = 132, frac = 1.050
[Sat Jul 14 03:27:02 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 22.21"
[Sat Jul 14 05:05:27 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src29.ximg exists
[Sat Jul 14 05:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src29.csv
[Sat Jul 14 05:05:27 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Jul 14 05:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src29.csv
[Sat Jul 14 05:05:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 05:05:28 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Jul 14 05:05:28 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Jul 14 05:05:28 2012] Fit fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Jul 14 06:48:04 2012] Warning, spatial fit 29 centroid is now closest to src. 48
[Sat Jul 14 06:48:04 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 06:48:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 06:48:04 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 06:48:04 2012] Source does appear to be extended
[Sat Jul 14 06:48:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 06:48:18 2012] XMMSAS src. selection expression = ellipse(28304.342000, 14850.194000, 1332.744038, 1332.744038, 0.000000, X, Y)
[Sat Jul 14 06:48:18 2012] Writing source region out to fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src45_src.reg
[Sat Jul 14 06:48:18 2012] Extracting stamp from image fullrun_pn_xmm0511001201_pi300-10000_cl_sm2.00.img.gz, (249, 95) - (402, 248)
[Sat Jul 14 06:48:18 2012] XMMSAS bgd. selection expression = annulus(28304.342000, 14850.194000, 2221.240064, 4442.480128, X, Y) && !ellipse(32822.015000, 15931.812000, 2203.144863, 2203.144863, 0.000000, X, Y) && !ellipse(32917.283630, 13787.071396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32681.859528, 18741.248535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32736.778809, 18307.825623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32050.774994, 15780.881577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32682.794098, 19610.348480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30264.909363, 16473.240204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30257.812469, 15931.149597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.162000, 15835.978000, 1760.904051, 1760.904051, 0.000000, X, Y) && !ellipse(30282.456451, 15278.129211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29601.138763, 15102.590622, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 06:48:18 2012] Writing fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src45.gif
[Sat Jul 14 07:07:26 2012] Mean detx,y = (1032.15, 12561.39) 
[Sat Jul 14 07:07:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:08:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:08:30 2012] Setting source spectrum file to fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat Jul 14 07:08:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat Jul 14 08:08:18 2012] Updating aperture counts using extracted products
[Sat Jul 14 08:08:18 2012] Error reading totcts from fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat Jul 14 08:08:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 08:08:19 2012] Using photon index=1.80, rate=0.0328, arf fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src45.arf
[Sat Jul 14 08:08:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 08:08:19 2012] Updating source flux to 1.5e-13
[Sat Jul 14 08:09:55 2012] Flag c found in src. 45 procflags, skipping spectral fitting