[Fri Jul 13 21:27:43 2012] Detection parameters:
  Position = (377.7, 183.8) = 17 46 5.19 -29 30 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107426.2 +/- 379.6
  Background counts = 26.6
  Rate = 2e+01 +/- 0.08

[Fri Jul 13 21:27:44 2012] Off-axis axis estimate = 10.11'
[Fri Jul 13 21:29:45 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 21:29:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 21:29:45 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Fri Jul 13 21:29:45 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Fri Jul 13 21:29:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.48"
[Sat Jul 14 01:01:25 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 01:01:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 01:01:25 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 01:01:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 01:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 01:01:26 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 01:01:26 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 01:01:26 2012] Fit fullrun_pn_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 03:26:46 2012] Spatial fit model total counts = 129766.000000, observed total counts = 124352.000000
[Sat Jul 14 03:26:46 2012] Offset between fit and detection position for source 1 = 0.154762 pixels
[Sat Jul 14 03:26:46 2012] 129320.100000 total counts/ 27552.100000 bgd. counts: snr = 613.103629
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154762 pixels
  Position = (377.8, 183.7) = 17 46 5.15 -29 30 53.5
  Extent = 9.7 (9.7-9.7)", rotation angle = 0
  Source counts = 101768.0 +/- 359.6
  Background counts = 27552.1
  Rate = 2e+01 +/- 0.07
[Sat Jul 14 03:26:47 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 03:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 03:26:47 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 03:26:47 2012] Source does appear to be extended
[Sat Jul 14 03:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 03:27:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 03:27:02 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Sat Jul 14 03:27:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.012
[Sat Jul 14 03:27:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.67"
[Sat Jul 14 05:05:26 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 05:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 05:05:26 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 05:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 05:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 05:05:27 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 05:05:27 2012] fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 05:05:27 2012] Fit fullrun_pn_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 06:48:04 2012] Spatial fit model total counts = 123626.000000, observed total counts = 118674.000000
[Sat Jul 14 06:48:04 2012] Offset between fit and detection position for source 1 = 0.043435 pixels
[Sat Jul 14 06:48:04 2012] 123547.100000 total counts/ 25496.100000 bgd. counts: snr = 614.066139
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.043435 pixels
  Position = (377.8, 183.7) = 17 46 5.16 -29 30 53.6
  Extent = 9.2 (9.2-9.2)", rotation angle = 0
  Source counts = 98051.0 +/- 351.5
  Background counts = 25496.1
  Rate = 2e+01 +/- 0.07
[Sat Jul 14 06:48:04 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 06:48:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 06:48:04 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 06:48:04 2012] Source does appear to be extended
[Sat Jul 14 06:48:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 06:48:17 2012] Counts = 98051.000000, rescaling region sizes by 3.000000
[Sat Jul 14 06:48:17 2012] XMMSAS src. selection expression = ellipse(32822.015000, 15931.812000, 1652.358648, 1652.358648, 0.000000, X, Y)
[Sat Jul 14 06:48:17 2012] Writing source region out to fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 06:48:17 2012] Extracting stamp from image fullrun_pn_xmm0511001201_pi300-10000_cl_sm2.00.img.gz, (283, 89) - (473, 279)
[Sat Jul 14 06:48:17 2012] XMMSAS bgd. selection expression = annulus(32822.015000, 15931.812000, 8261.793238, 16523.586475, X, Y) && !ellipse(32917.283630, 13787.071396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32681.859528, 18741.248535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32736.778809, 18307.825623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32050.774994, 15780.881577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.705414, 28139.789398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32331.212463, 27534.660431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32376.674530, 26665.764923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32426.196136, 25790.096436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32424.325200, 25106.801800, 858.776025, 858.776025, 0.000000, X, Y) && !ellipse(32439.632000, 24619.289600, 657.214419, 657.214419, 0.000000, X, Y) && !ellipse(32445.822069, 24145.278400, 787.504023, 787.504023, 0.000000, X, Y) && !ellipse(32502.554779, 23439.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32549.182404, 22400.128479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32564.042603, 21703.244354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32607.492157, 20916.783524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32666.269196, 20224.523132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32682.794098, 19610.348480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34426.795227, 13700.052811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35379.278000, 17823.164000, 375.158411, 375.158411, 0.000000, X, Y) && !ellipse(30264.909363, 16473.240204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35320.655975, 16566.815384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30257.812469, 15931.149597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36408.264832, 16123.116180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.162000, 15835.978000, 1760.904051, 1760.904051, 0.000000, X, Y) && !ellipse(35465.227631, 15451.894241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.342000, 14850.194000, 1776.992051, 1776.992051, 0.000000, X, Y) && !ellipse(30282.456451, 15278.129211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29601.138763, 15102.590622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34744.273010, 14748.186691, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 06:48:17 2012] Writing fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 06:48:35 2012] Mean detx,y = (5451.51, 11722.94) 
[Sat Jul 14 06:48:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 06:53:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 06:53:30 2012] Setting source spectrum file to fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 06:53:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 08:08:18 2012] Updating aperture counts using extracted products
[Sat Jul 14 08:08:18 2012] Error reading totcts from fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 08:08:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 08:08:18 2012] Using photon index=1.80, rate=19.5, arf fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 08:08:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 08:08:19 2012] Updating source flux to 8.6e-11
[Sat Jul 14 08:11:17 2012] Reading fit data from xmm0511001201/analysis//spectral/fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 08:11:17 2012] Spectral fit parameter nH value = 6.16715e+22
[Sat Jul 14 08:11:17 2012] Spectral fit parameter PhoIndex value = 1.6811
[Sat Jul 14 08:11:17 2012] Failed to get F(0.3-8.0) from xmm0511001201/analysis//spectral/fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 08:11:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 08:11:17 2012] Using Nh = 6.2e+22, photon index=1.68, rate=19.5, arf fullrun_pn_xmm0511001201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 08:11:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 08:11:17 2012] Updating source flux to 3.6e-10