[Fri Jul 13 21:28:21 2012] Detection parameters:
  Position = (378.9, 184.0) = 17 46 4.78 -29 30 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28854.5 +/- 205.1
  Background counts = 64.9
  Rate = 8 +/- 0.06

[Fri Jul 13 21:28:22 2012] Off-axis axis estimate = 10.14'
[Sat Jul 14 02:51:13 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 02:51:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 02:51:13 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Sat Jul 14 02:51:13 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.911
[Sat Jul 14 02:51:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.50"
[Sat Jul 14 03:26:33 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 03:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 03:26:33 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 03:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 03:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 03:26:34 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 03:26:34 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 03:26:34 2012] Fit fullrun_mos2_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 03:26:54 2012] Spatial fit model total counts = 50731.800000, observed total counts = 50732.000000
[Sat Jul 14 03:26:54 2012] Offset between fit and detection position for source 1 = 1.327288 pixels
[Sat Jul 14 03:26:54 2012] 50700.860000 total counts/ 9189.560000 bgd. counts: snr = 433.030988
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.327288 pixels
  Position = (377.6, 183.8) = 17 46 5.22 -29 30 53.2
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source counts = 41511.3 +/- 225.2
  Background counts = 9189.6
  Rate = 6 +/- 0.03
[Sat Jul 14 03:26:54 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 03:26:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 03:26:54 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 03:26:54 2012] Source does appear to be extended
[Sat Jul 14 03:26:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 06:27:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 06:27:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 06:27:55 2012] Initial guess for spatial extent in simple fitting = 14.51"
[Sat Jul 14 06:27:55 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.952
[Sat Jul 14 06:27:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.51"
[Sat Jul 14 06:47:56 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 06:47:56 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 06:47:56 2012] Fit fullrun_mos2_xmm0511001201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jul 14 06:47:56 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 06:47:56 2012] fullrun_mos2_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 06:47:56 2012] Fit fullrun_mos2_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 06:48:10 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Sat Jul 14 06:48:10 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 06:48:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 06:48:10 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 06:48:10 2012] Source does appear to be extended
[Sat Jul 14 06:48:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 07:47:48 2012] Counts = 41511.300000, rescaling region sizes by 3.000000
[Sat Jul 14 07:47:48 2012] XMMSAS src. selection expression = ellipse(32805.612000, 15940.938000, 2611.494075, 2611.494075, 0.000000, X, Y)
[Sat Jul 14 07:47:48 2012] Writing source region out to fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 07:47:48 2012] Extracting stamp from image fullrun_mos2_xmm0511001201_pi300-10000_cl_sm2.00.img.gz, (228, 34) - (528, 334)
[Sat Jul 14 07:47:48 2012] XMMSAS bgd. selection expression = annulus(32805.612000, 15940.938000, 13057.470376, 26114.940751, X, Y) && !ellipse(30285.751343, 15780.847061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34210.317413, 15004.059830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29936.906000, 15236.112600, 1785.888051, 1785.888051, 0.000000, X, Y) && !ellipse(34608.084000, 13524.502000, 1306.560038, 1306.560038, 0.000000, X, Y)
[Sat Jul 14 07:47:48 2012] Writing fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 07:47:53 2012] Mean detx,y = (-5357.71, -11806.79) 
[Sat Jul 14 07:47:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:55:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:55:19 2012] Setting source spectrum file to fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 07:55:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 08:08:19 2012] Updating aperture counts using extracted products
[Sat Jul 14 08:08:19 2012] Error reading totcts from fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 08:08:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 08:08:20 2012] Using photon index=1.80, rate=6.27, arf fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 08:08:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 08:08:20 2012] Updating source flux to 9.2e-11
[Sat Jul 14 08:09:55 2012] Reading fit data from xmm0511001201/analysis//spectral/fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 08:09:55 2012] Spectral fit parameter nH value = 7.15763e+22
[Sat Jul 14 08:09:55 2012] Spectral fit parameter PhoIndex value = 1.87982
[Sat Jul 14 08:09:55 2012] Failed to get F(0.3-8.0) from xmm0511001201/analysis//spectral/fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 08:09:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 08:09:55 2012] Using Nh = 7.2e+22, photon index=1.88, rate=6.27, arf fullrun_mos2_xmm0511001201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 08:09:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 08:09:55 2012] Updating source flux to 2.8e-10