[Fri Jul 13 21:28:04 2012] Detection parameters:
  Position = (396.1, 172.9) = 17 45 59.04 -29 31 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.5 +/- 16.8
  Background counts = 19.3
  Rate = 0.02 +/- 0.003

[Fri Jul 13 21:28:04 2012] Off-axis axis estimate = 11.53'
[Sat Jul 14 01:01:27 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 01:01:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 01:01:27 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Sat Jul 14 01:01:27 2012] source mask rpix=2.8, npix_max = 43, mask sum = 24, frac = 0.550
[Sat Jul 14 01:01:27 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.20"
[Sat Jul 14 02:51:12 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jul 14 02:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_src4.csv
[Sat Jul 14 02:51:12 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jul 14 02:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_src4.csv
[Sat Jul 14 02:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 02:51:12 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jul 14 02:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jul 14 02:51:12 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jul 14 02:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jul 14 02:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 03:26:51 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Sat Jul 14 03:26:51 2012] Source 20 is offset by 0.921226 and 4.670082 pixels which is larger than
2 X fitted extent = 1.409352 x 1.409352, not incorporating fit results
[Sat Jul 14 03:26:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 03:26:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 03:26:51 2012] Assessing source extent using major
[Sat Jul 14 03:26:51 2012] Source does appear to be extended
[Sat Jul 14 03:26:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 05:05:28 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 05:05:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 05:05:28 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Sat Jul 14 05:05:28 2012] source mask rpix=2.8, npix_max = 43, mask sum = 24, frac = 0.550
[Sat Jul 14 05:05:28 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.20"
[Sat Jul 14 06:27:54 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jul 14 06:27:54 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jul 14 06:27:54 2012] Fit fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat Jul 14 06:27:54 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jul 14 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jul 14 06:27:54 2012] fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jul 14 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jul 14 06:27:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 06:48:08 2012] Warning, spatial fit 4 centroid is now closest to src. 6
[Sat Jul 14 06:48:08 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 06:48:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 06:48:08 2012] Assessing source extent using major
[Sat Jul 14 06:48:08 2012] Source does appear to be extended
[Sat Jul 14 06:48:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 07:33:55 2012] XMMSAS src. selection expression = ellipse(34416.278656, 14993.429092, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 07:33:55 2012] Writing source region out to fullrun_mos1_xmm0511001201_pi300-10000_pass1_cl_src20_src.reg
[Sat Jul 14 07:33:55 2012] Extracting stamp from image fullrun_mos1_xmm0511001201_pi300-10000_cl_sm2.00.img.gz, (359, 135) - (434, 210)
[Sat Jul 14 07:33:55 2012] XMMSAS bgd. selection expression = annulus(34416.278656, 14993.429092, 1087.500000, 2175.000000, X, Y) && !ellipse(34515.286000, 16405.401200, 905.064026, 905.064026, 0.000000, X, Y) && !ellipse(34461.759308, 17089.771194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34458.501587, 15698.010147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35316.333588, 15544.609192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34558.999756, 17684.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35239.767853, 17198.150818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35331.051400, 17726.410000, 1879.544054, 1879.544054, 0.000000, X, Y) && !ellipse(35595.714355, 15106.440414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35952.467987, 16760.980331, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 07:33:55 2012] Writing fullrun_mos1_xmm0511001201_pi300-10000_pass1_cl_src20.gif
[Sat Jul 14 07:34:37 2012] Mean detx,y = (-12511.44, 6897.22) 
[Sat Jul 14 07:34:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 07:34:52 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 07:34:52 2012] Setting source spectrum file to fullrun_mos1_xmm0511001201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jul 14 07:34:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511001201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jul 14 07:42:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 07:42:25 2012] rmf not generated due to insufficient counts
[Sat Jul 14 08:08:19 2012] Updating aperture counts using extracted products
[Sat Jul 14 08:08:19 2012] Error reading totcts from fullrun_mos1_xmm0511001201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jul 14 08:08:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 08:08:19 2012] Using photon index=1.80, rate=0.0244, arf fullrun_mos1_xmm0511001201_pi300-10000_pass1_cl_src20.arf
[Sat Jul 14 08:08:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 08:08:19 2012] Updating source flux to 8e-13
[Sat Jul 14 08:08:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting