[Thu Jun 14 05:21:55 2012] Detection parameters:
  Position = (352.9, 144.1) = 17 46 5.07 -29 30 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20657.1 +/- 170.3
  Background counts = 33.4
  Rate = 3 +/- 0.03

[Thu Jun 14 05:21:55 2012] Off-axis axis estimate = 11.86'
[Thu Jun 14 08:34:10 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 08:34:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 08:34:10 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Thu Jun 14 08:34:10 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.806
[Thu Jun 14 08:34:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.36"
[Thu Jun 14 09:13:54 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 09:13:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 09:13:54 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 09:13:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 09:13:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 09:13:54 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 09:13:54 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 09:13:54 2012] Fit fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 14 09:14:05 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.069308 pixels away
[Thu Jun 14 09:14:05 2012] Spatial fit model total counts = 10308.600000, observed total counts = 10923.000000
[Thu Jun 14 09:14:05 2012] Offset between fit and detection position for source 5 = 2.724724 pixels
[Thu Jun 14 09:14:05 2012] Warning, changing simple spatial fit ID from 1 to 7
[Thu Jun 14 09:14:05 2012] 9664.560000 total counts/ 1730.820000 bgd. counts: snr = 190.700579
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.724724 pixels
  Position = (352.2, 146.8) = 17 46 5.31 -29 30 44.3
  Extent = 9.4 (9.4-9.5)", rotation angle = 0
  Source counts = 7933.7 +/- 98.3
  Background counts = 1730.8
  Rate = 1 +/- 0.01
[Thu Jun 14 09:14:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 09:14:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 09:14:05 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 09:14:05 2012] Source does appear to be extended
[Thu Jun 14 09:14:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:14:05 2012] Source is confused with source 2
[Thu Jun 14 12:24:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 12:24:23 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Thu Jun 14 12:24:23 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Thu Jun 14 12:24:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.44"
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 13:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 13:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 13:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 13:22:42 2012] Fit fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 13:22:53 2012] Spatial fit model total counts = 22014.500000, observed total counts = 22078.000000
[Thu Jun 14 13:22:53 2012] Offset between fit and detection position for source 5 = 2.528988 pixels
[Thu Jun 14 13:22:53 2012] 21848.570000 total counts/ 4062.570000 bgd. counts: snr = 279.047322
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.528988 pixels
  Position = (352.8, 144.3) = 17 46 5.10 -29 30 55.0
  Extent = 10.2 (10.2-10.2)", rotation angle = 0
  Source counts = 17786.0 +/- 147.8
  Background counts = 4062.6
  Rate = 3 +/- 0.02
[Thu Jun 14 13:22:53 2012] Spatial fit model total counts = 18993.200000, observed total counts = 18778.000000
[Thu Jun 14 13:22:53 2012] Offset between fit and detection position for source 5 = 0.096820 pixels
[Thu Jun 14 13:22:53 2012] Warning, changing simple spatial fit ID from 1 to 2
[Thu Jun 14 13:22:53 2012] 19104.570000 total counts/ 4613.870000 bgd. counts: snr = 213.332336
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.096820 pixels
  Position = (352.8, 144.2) = 17 46 5.10 -29 30 55.4
  Extent = 12.0 (11.8-12.3)" x 5.4 (5.3-5.5)", rotation angle = 336 (335-337) degrees
  Source counts = 14490.7 +/- 138.2
  Background counts = 4613.9
  Rate = 2 +/- 0.02
[Thu Jun 14 13:22:53 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:22:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:22:53 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 13:22:53 2012] Source does appear to be extended
[Thu Jun 14 13:22:53 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.15
[Thu Jun 14 13:22:53 2012] Source is asymmetric
[Thu Jun 14 14:09:24 2012] Counts = 14490.700000, rescaling region sizes by 3.000000
[Thu Jun 14 14:09:24 2012] XMMSAS src. selection expression = ellipse(30642.672000, 12498.291800, 2162.232062, 964.256428, 336.076000, X, Y)
[Thu Jun 14 14:09:24 2012] Writing source region out to fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 14 14:09:24 2012] Extracting stamp from image fullrun_mos2_xmm0511001101_pi300-10000_cl_sm2.00.img.gz, (229, 20) - (477, 268)
[Thu Jun 14 14:09:24 2012] XMMSAS bgd. selection expression = annulus(30642.672000, 12498.291800, 10811.160311, 21622.320622, X, Y) && !ellipse(30260.536000, 12326.592000, 886.368026, 886.368026, 0.000000, X, Y) && !ellipse(29562.954132, 11745.310059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.228775, 30685.165985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32403.113312, 12173.511856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31217.733002, 11694.745026, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 14:09:24 2012] Writing fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5.gif
[Thu Jun 14 14:09:27 2012] Mean detx,y = (5976.48, 11746.59) 
[Thu Jun 14 14:09:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 14:13:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 14:13:53 2012] Setting source spectrum file to fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 14 14:13:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 14 14:24:31 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:24:31 2012] Error reading totcts from fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 14 14:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:24:31 2012] Using photon index=1.80, rate=2.19, arf fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5.arf
[Thu Jun 14 14:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:24:31 2012] Updating source flux to 5e-11
[Thu Jun 14 14:25:50 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu Jun 14 14:26:34 2012] Reading fit data from xmm0511001101/analysis//spectral/fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5_pl.csv
[Thu Jun 14 14:26:34 2012] Spectral fit parameter nH value = 6.10067e+22
[Thu Jun 14 14:26:34 2012] Spectral fit parameter PhoIndex value = 1.52825
[Thu Jun 14 14:26:34 2012] Failed to get F(0.3-8.0) from xmm0511001101/analysis//spectral/fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 14:26:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:26:34 2012] Using Nh = 6.1e+22, photon index=1.53, rate=2.19, arf fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src5.arf
[Thu Jun 14 14:26:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:26:34 2012] Updating source flux to 1.6e-10