[Thu Jun 14 05:21:55 2012] Detection parameters:
  Position = (340.4, 135.6) = 17 46 9.24 -29 31 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 335.2 +/- 26.0
  Background counts = 28.6
  Rate = 0.05 +/- 0.004

[Thu Jun 14 05:21:55 2012] Off-axis axis estimate = 12.19'
[Thu Jun 14 08:34:10 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 08:34:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 08:34:10 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Thu Jun 14 08:34:10 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.919
[Thu Jun 14 08:34:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.53"
[Thu Jun 14 09:13:54 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 09:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 09:13:54 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 09:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 09:13:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 09:13:55 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 09:13:55 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 09:13:55 2012] Fit fullrun_mos2_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 14 09:14:05 2012] Spatial fit model total counts = 7438.340000, observed total counts = 18680.000000
[Thu Jun 14 09:14:05 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 09:14:05 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Thu Jun 14 09:14:05 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 09:14:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 09:14:05 2012] Assessing source extent using major
[Thu Jun 14 09:14:05 2012] Source does appear to be extended
[Thu Jun 14 09:14:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 12:24:24 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 12:24:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 12:24:24 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Thu Jun 14 12:24:24 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.919
[Thu Jun 14 12:24:24 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.53"
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 14 13:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 14 13:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 13:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 14 13:22:42 2012] fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 14 13:22:42 2012] Fit fullrun_mos2_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 14 13:22:53 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Thu Jun 14 13:22:53 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:22:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:22:53 2012] Assessing source extent using major
[Thu Jun 14 13:22:53 2012] Source does appear to be extended
[Thu Jun 14 13:22:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 14:09:24 2012] XMMSAS src. selection expression = ellipse(29562.954132, 11745.310059, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 14:09:24 2012] Writing source region out to fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 14 14:09:24 2012] Extracting stamp from image fullrun_mos2_xmm0511001101_pi300-10000_cl_sm2.00.img.gz, (303, 98) - (378, 173)
[Thu Jun 14 14:09:24 2012] XMMSAS bgd. selection expression = annulus(29562.954132, 11745.310059, 1087.500000, 2175.000000, X, Y) && !ellipse(30642.672000, 12498.291800, 2882.976083, 1285.675237, 336.076000, X, Y) && !ellipse(30260.536000, 12326.592000, 886.368026, 886.368026, 0.000000, X, Y) && !ellipse(32403.113312, 12173.511856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31217.733002, 11694.745026, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 14:09:24 2012] Writing fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src3.gif
[Thu Jun 14 14:15:46 2012] Mean detx,y = (5015.61, 12392.35) 
[Thu Jun 14 14:15:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 14:15:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 14:15:55 2012] Setting source spectrum file to fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 14 14:15:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 14 14:23:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 14:23:50 2012] rmf not generated due to insufficient counts
[Thu Jun 14 14:24:31 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:24:31 2012] Error reading totcts from fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 14 14:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:24:31 2012] Using photon index=1.80, rate=0.0506, arf fullrun_mos2_xmm0511001101_pi300-10000_pass1_cl_src3.arf
[Thu Jun 14 14:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:24:31 2012] Updating source flux to 1.4e-12
[Thu Jun 14 14:25:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting