[Thu Jun 14 05:21:41 2012] Detection parameters:
  Position = (367.4, 153.9) = 17 46 0.23 -29 30 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.3 +/- 22.0
  Background counts = 27.4
  Rate = 0.04 +/- 0.003

[Thu Jun 14 05:21:41 2012] Off-axis axis estimate = 11.61'
[Thu Jun 14 07:10:45 2012] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:10:45 2012] Initial guess for spatial extent in simple fitting = 12.23"
[Thu Jun 14 07:10:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.957
[Thu Jun 14 07:10:45 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.23"
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 08:34:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 14 08:34:10 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 14 09:14:04 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Thu Jun 14 09:14:04 2012] Spatial fit model total counts = 965.367000, observed total counts = 965.000000
[Thu Jun 14 09:14:04 2012] Offset between fit and detection position for source 3 = 0.430292 pixels
[Thu Jun 14 09:14:04 2012] Warning, changing simple spatial fit ID from 2 to 5
[Thu Jun 14 09:14:04 2012] 937.862000 total counts/ 774.265000 bgd. counts: snr = 5.879366
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.430292 pixels
  Position = (367.0, 153.8) = 17 46 0.37 -29 30 13.7
  Extent = 8.3 (5.5-12.1)", rotation angle = 0
  Source counts = 163.6 +/- 30.6
  Background counts = 774.3
  Rate = 0.02 +/- 0.005
[Thu Jun 14 09:14:04 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 09:14:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 09:14:04 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 09:14:04 2012] Source does appear to be extended
[Thu Jun 14 09:14:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:14:04 2012] Source is confused with source 2
[Thu Jun 14 09:14:04 2012] Source is confused with source 9
[Thu Jun 14 10:27:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:27:20 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Thu Jun 14 10:27:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.856
[Thu Jun 14 10:27:20 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.34"
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src2.csv
[Thu Jun 14 12:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 14 12:24:23 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun 14 13:22:51 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Thu Jun 14 13:22:51 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:22:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:22:51 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 13:22:51 2012] Source does appear to be extended
[Thu Jun 14 13:22:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 13:40:51 2012] XMMSAS src. selection expression = ellipse(31879.368000, 13330.178000, 500.479814, 500.479814, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing source region out to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 14 13:40:51 2012] Extracting stamp from image fullrun_mos1_xmm0511001101_pi300-10000_cl_sm2.00.img.gz, (338, 125) - (396, 183)
[Thu Jun 14 13:40:51 2012] XMMSAS bgd. selection expression = annulus(31879.368000, 13330.178000, 834.133024, 1668.266048, X, Y) && !ellipse(30636.393160, 12531.142800, 2555.496074, 2555.496074, 0.000000, X, Y) && !ellipse(31152.416000, 12879.008000, 1997.544057, 1997.544057, 0.000000, X, Y) && !ellipse(32463.833832, 13701.178543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.611023, 13853.613068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.684296, 11002.916740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31798.945465, 12310.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32894.386000, 11664.214000, 2034.760059, 2034.760059, 0.000000, X, Y) && !ellipse(32113.781800, 14361.326000, 1881.784054, 1234.200036, 86.931600, X, Y) && !ellipse(32312.722600, 14925.552000, 1785.408051, 1785.408051, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src3.gif
[Thu Jun 14 13:44:27 2012] Mean detx,y = (11199.09, -7362.24) 
[Thu Jun 14 13:44:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 13:44:35 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 13:44:35 2012] Setting source spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 14 13:44:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 14 14:24:31 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:24:31 2012] Error reading totcts from fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 14 14:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:24:31 2012] Using photon index=1.80, rate=0.0247, arf fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src3.arf
[Thu Jun 14 14:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:24:31 2012] Updating source flux to 7.5e-13
[Thu Jun 14 14:24:32 2012] Flag c found in src. 3 procflags, skipping spectral fitting