[Thu Jun 14 05:21:41 2012] Detection parameters:
  Position = (366.8, 147.2) = 17 46 0.43 -29 30 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.5 +/- 18.1
  Background counts = 24.1
  Rate = 0.02 +/- 0.003

[Thu Jun 14 05:21:41 2012] Off-axis axis estimate = 12.04'
[Thu Jun 14 07:10:45 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:10:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 07:10:45 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Thu Jun 14 07:10:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.929
[Thu Jun 14 07:10:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.45"
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 08:34:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 08:34:10 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 14 09:14:04 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.585034 pixels away
[Thu Jun 14 09:14:04 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.765467 pixels away
[Thu Jun 14 09:14:04 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 09:14:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 09:14:04 2012] Assessing source extent using major
[Thu Jun 14 09:14:04 2012] Source does appear to be extended
[Thu Jun 14 09:14:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 09:14:04 2012] Source is confused with source 3
[Thu Jun 14 10:27:20 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:27:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 10:27:20 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Thu Jun 14 10:27:20 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.929
[Thu Jun 14 10:27:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.45"
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 12:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 14 12:24:23 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 14 13:22:51 2012] Source 2 is offset by 7.473376 and -1.565929 pixels which is larger than
2 X fitted extent = 2.156984 x 2.156984, not incorporating fit results
[Thu Jun 14 13:22:51 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.146541 pixels away
[Thu Jun 14 13:22:51 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.947218 pixels away
[Thu Jun 14 13:22:51 2012] Spatial fit model total counts = 1869.570000, observed total counts = 1769.000000
[Thu Jun 14 13:22:51 2012] Offset between fit and detection position for source 2 = 8.297338 pixels
[Thu Jun 14 13:22:51 2012] Warning, changing simple spatial fit ID from 3 to 11
[Thu Jun 14 13:22:51 2012] 1798.916000 total counts/ 1270.680000 bgd. counts: snr = 14.818693
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 8.297338 pixels
  Position = (358.6, 148.6) = 17 46 3.15 -29 30 36.3
  Extent = 25.0 (21.0-28.8)", rotation angle = 0
  Source counts = 528.2 +/- 42.4
  Background counts = 1270.7
  Rate = 0.08 +/- 0.006
[Thu Jun 14 13:22:51 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:22:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:22:51 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 13:22:51 2012] Source does appear to be extended
[Thu Jun 14 13:22:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 13:40:51 2012] XMMSAS src. selection expression = ellipse(31152.416000, 12879.008000, 1498.158043, 1498.158043, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing source region out to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 14 13:40:51 2012] Extracting stamp from image fullrun_mos1_xmm0511001101_pi300-10000_cl_sm2.00.img.gz, (273, 62) - (445, 235)
[Thu Jun 14 13:40:51 2012] XMMSAS bgd. selection expression = annulus(31152.416000, 12879.008000, 2496.930072, 4993.860144, X, Y) && !ellipse(30636.393160, 12531.142800, 2555.496074, 2555.496074, 0.000000, X, Y) && !ellipse(31879.368000, 13330.178000, 667.306419, 667.306419, 0.000000, X, Y) && !ellipse(32463.833832, 13701.178543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.611023, 13853.613068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.684296, 11002.916740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29147.893402, 12647.251389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31798.945465, 12310.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32894.386000, 11664.214000, 2034.760059, 2034.760059, 0.000000, X, Y) && !ellipse(32113.781800, 14361.326000, 1881.784054, 1234.200036, 86.931600, X, Y) && !ellipse(32312.722600, 14925.552000, 1785.408051, 1785.408051, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src2.gif
[Thu Jun 14 13:44:37 2012] Mean detx,y = (11923.35, -6146.57) 
[Thu Jun 14 13:44:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 13:45:03 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 13:45:03 2012] Setting source spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 13:45:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 14 14:24:31 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:24:31 2012] Error reading totcts from fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 14:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:24:31 2012] Using photon index=1.80, rate=0.0799, arf fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 14:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:24:31 2012] Updating source flux to 1.6e-12
[Thu Jun 14 14:24:32 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Jun 14 14:24:32 2012] Flag c found in src. 2 procflags, skipping spectral fitting