[Thu Jun 14 05:21:41 2012] Detection parameters:
  Position = (341.2, 127.0) = 17 46 8.95 -29 32 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.4 +/- 16.1
  Background counts = 25.7
  Rate = 0.02 +/- 0.002

[Thu Jun 14 05:21:41 2012] Off-axis axis estimate = 12.81'
[Thu Jun 14 07:10:45 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:10:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 07:10:45 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Thu Jun 14 07:10:45 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.882
[Thu Jun 14 07:10:45 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.83"
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 14 08:34:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 14 08:34:10 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jun 14 09:14:04 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.266133 pixels away
[Thu Jun 14 09:14:04 2012] Source 17 is offset by 2.492463 and -4.804352 pixels which is larger than
2 X fitted extent = 1.741283 x 1.741283, not incorporating fit results
[Thu Jun 14 09:14:04 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 09:14:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 09:14:04 2012] Assessing source extent using major
[Thu Jun 14 09:14:04 2012] Source does appear to be extended
[Thu Jun 14 09:14:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 10:27:20 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:27:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 10:27:20 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Thu Jun 14 10:27:20 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.882
[Thu Jun 14 10:27:20 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.83"
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src7.csv
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src7.csv
[Thu Jun 14 12:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jun 14 12:24:23 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Jun 14 13:22:51 2012] Warning, spatial fit 7 centroid is now closest to src. 12
[Thu Jun 14 13:22:51 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:22:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:22:51 2012] Assessing source extent using major
[Thu Jun 14 13:22:51 2012] Source does appear to be extended
[Thu Jun 14 13:22:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 13:40:51 2012] XMMSAS src. selection expression = ellipse(29636.684296, 11002.916740, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing source region out to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jun 14 13:40:51 2012] Extracting stamp from image fullrun_mos1_xmm0511001101_pi300-10000_cl_sm2.00.img.gz, (304, 90) - (379, 165)
[Thu Jun 14 13:40:51 2012] XMMSAS bgd. selection expression = annulus(29636.684296, 11002.916740, 1087.500000, 2175.000000, X, Y) && !ellipse(30636.393160, 12531.142800, 2555.496074, 2555.496074, 0.000000, X, Y) && !ellipse(31879.368000, 13330.178000, 667.306419, 667.306419, 0.000000, X, Y) && !ellipse(31152.416000, 12879.008000, 1997.544057, 1997.544057, 0.000000, X, Y) && !ellipse(32463.833832, 13701.178543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.611023, 13853.613068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29147.893402, 12647.251389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31798.945465, 12310.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32894.386000, 11664.214000, 2034.760059, 2034.760059, 0.000000, X, Y) && !ellipse(32113.781800, 14361.326000, 1881.784054, 1234.200036, 86.931600, X, Y) && !ellipse(32312.722600, 14925.552000, 1785.408051, 1785.408051, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src17.gif
[Thu Jun 14 13:45:35 2012] Mean detx,y = (13400.48, -5109.23) 
[Thu Jun 14 13:45:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 13:45:41 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 13:45:41 2012] Setting source spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 14 13:45:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jun 14 13:58:41 2012] Not generating rmf since there are only 99 counts
[Thu Jun 14 13:58:41 2012] rmf not generated due to insufficient counts
[Thu Jun 14 14:24:31 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:24:31 2012] Error reading totcts from fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 14 14:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:24:31 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src17.arf
[Thu Jun 14 14:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:24:31 2012] Updating source flux to 3.6e-13
[Thu Jun 14 14:24:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting