[Thu Jun 14 05:21:41 2012] Detection parameters:
  Position = (335.6, 145.9) = 17 46 10.83 -29 30 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.4 +/- 15.5
  Background counts = 27.8
  Rate = 0.01 +/- 0.002

[Thu Jun 14 05:21:41 2012] Off-axis axis estimate = 11.38'
[Thu Jun 14 07:10:45 2012] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 07:10:45 2012] Initial guess for spatial extent in simple fitting = 12.12"
[Thu Jun 14 07:10:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.972
[Thu Jun 14 07:10:45 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.12"
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src8.csv
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun 14 08:34:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src8.csv
[Thu Jun 14 08:34:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun 14 08:34:10 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun 14 08:34:10 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jun 14 09:14:04 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.887885 pixels away
[Thu Jun 14 09:14:04 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 09:14:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 09:14:04 2012] Assessing source extent using major
[Thu Jun 14 09:14:04 2012] Source does appear to be extended
[Thu Jun 14 09:14:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 10:27:20 2012] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:27:20 2012] Initial guess for spatial extent in simple fitting = 12.12"
[Thu Jun 14 10:27:20 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.972
[Thu Jun 14 10:27:20 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 12.12"
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src8.csv
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun 14 12:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src8.csv
[Thu Jun 14 12:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun 14 12:24:23 2012] fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun 14 12:24:23 2012] Fit fullrun_mos1_xmm0511001101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jun 14 13:22:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.061280 pixels away
[Thu Jun 14 13:22:51 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.875708 pixels away
[Thu Jun 14 13:22:51 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.864900 pixels away
[Thu Jun 14 13:22:51 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:22:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:22:51 2012] Assessing source extent using major
[Thu Jun 14 13:22:51 2012] Source does appear to be extended
[Thu Jun 14 13:22:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 13:40:51 2012] XMMSAS src. selection expression = ellipse(29147.893402, 12647.251389, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing source region out to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 14 13:40:51 2012] Extracting stamp from image fullrun_mos1_xmm0511001101_pi300-10000_cl_sm2.00.img.gz, (298, 108) - (373, 183)
[Thu Jun 14 13:40:51 2012] XMMSAS bgd. selection expression = annulus(29147.893402, 12647.251389, 1087.500000, 2175.000000, X, Y) && !ellipse(30636.393160, 12531.142800, 2555.496074, 2555.496074, 0.000000, X, Y) && !ellipse(31879.368000, 13330.178000, 667.306419, 667.306419, 0.000000, X, Y) && !ellipse(31152.416000, 12879.008000, 1997.544057, 1997.544057, 0.000000, X, Y) && !ellipse(31234.611023, 13853.613068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29636.684296, 11002.916740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31798.945465, 12310.743683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32894.386000, 11664.214000, 2034.760059, 2034.760059, 0.000000, X, Y) && !ellipse(32113.781800, 14361.326000, 1881.784054, 1234.200036, 86.931600, X, Y) && !ellipse(32312.722600, 14925.552000, 1785.408051, 1785.408051, 0.000000, X, Y)
[Thu Jun 14 13:40:51 2012] Writing fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src12.gif
[Thu Jun 14 13:45:43 2012] Mean detx,y = (11965.01, -4728.46) 
[Thu Jun 14 13:45:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 13:45:49 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 13:45:49 2012] Setting source spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 14 13:45:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 14 13:58:45 2012] Not generating rmf since there are only 81 counts
[Thu Jun 14 13:58:45 2012] rmf not generated due to insufficient counts
[Thu Jun 14 14:24:31 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:24:31 2012] Error reading totcts from fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 14 14:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:24:31 2012] Using photon index=1.80, rate=0.0123, arf fullrun_mos1_xmm0511001101_pi300-10000_pass1_cl_src12.arf
[Thu Jun 14 14:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:24:31 2012] Updating source flux to 2.5e-13
[Thu Jun 14 14:24:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting