[Thu May 30 05:12:48 2013] Detection parameters:
  Position = (146.8, 290.8) = 17 44 38.19 -28 59 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.8 +/- 8.8
  Background counts = 10.2
  Rate = 0.007 +/- 0.002

[Thu May 30 05:12:48 2013] Off-axis axis estimate = 11.01'
[Thu May 30 05:15:02 2013] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Thu May 30 05:15:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 05:15:02 2013] Initial guess for spatial extent in simple fitting = 11.93"
[Thu May 30 05:15:02 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.856
[Thu May 30 05:15:02 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.93"
[Thu May 30 05:31:42 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 30 05:31:42 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 30 05:31:42 2013] Fit fullrun_pn_xmm0511000901_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu May 30 05:31:42 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 30 05:31:42 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 30 05:31:42 2013] Fit fullrun_pn_xmm0511000901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 30 05:57:14 2013] Spatial fit model total counts = 164.504000, observed total counts = 161.000000
[Thu May 30 05:57:14 2013] Offset between fit and detection position for source 3 = 1.657948 pixels
[Thu May 30 05:57:14 2013] 160.103600 total counts/ 105.665000 bgd. counts: snr = 5.295919
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.657948 pixels
  Position = (148.5, 290.9) = 17 44 37.64 -28 59 32.2
  Extent = 10.2 (7.6-15.2)", rotation angle = 0
  Source counts = 54.4 +/- 12.7
  Background counts = 105.7
  Rate = 0.01 +/- 0.003
[Thu May 30 05:57:14 2013] Vigneting correction estimate = 1.000000
[Thu May 30 05:57:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 05:57:14 2013] Assessing source extent using major axis lower bound
[Thu May 30 05:57:14 2013] Source does appear to be extended
[Thu May 30 05:57:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 05:57:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 05:57:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 05:57:26 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Thu May 30 05:57:26 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.930
[Thu May 30 05:57:26 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.18"
[Thu May 30 06:14:09 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 30 06:14:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_src3.csv
[Thu May 30 06:14:09 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 30 06:14:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_src3.csv
[Thu May 30 06:14:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 06:14:09 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 30 06:14:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 06:14:09 2013] fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 30 06:14:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 06:14:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 06:32:52 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Thu May 30 06:32:52 2013] Vigneting correction estimate = 1.000000
[Thu May 30 06:32:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 06:32:52 2013] Assessing source extent using major axis lower bound
[Thu May 30 06:32:52 2013] Source does appear to be extended
[Thu May 30 06:32:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 06:33:04 2013] XMMSAS src. selection expression = ellipse(12867.351600, 25262.628600, 610.836018, 610.836018, 0.000000, X, Y)
[Thu May 30 06:33:04 2013] Writing source region out to fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3_src.reg
[Thu May 30 06:33:04 2013] Extracting stamp from image fullrun_pn_xmm0511000901_pi300-10000_cl_sm2.00.img.gz, (113, 256) - (184, 326)
[Thu May 30 06:33:04 2013] XMMSAS bgd. selection expression = annulus(12867.351600, 25262.628600, 1018.060029, 2036.120059, X, Y)
[Thu May 30 06:33:04 2013] Writing fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3.gif
[Thu May 30 06:34:44 2013] Mean detx,y = (12017.86, 936.32) 
[Thu May 30 06:34:49 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 06:35:24 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 06:35:25 2013] Setting source spectrum file to fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 30 06:35:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 30 06:38:26 2013] Not generating rmf since there are only 54 counts
[Thu May 30 06:38:26 2013] rmf not generated due to insufficient counts
[Thu May 30 06:51:03 2013] Updating aperture counts using extracted products
[Thu May 30 06:51:03 2013] Total counts from fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 101.00
[Thu May 30 06:51:03 2013] Total counts from fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3_bgd.pi.gz = 505.00
[Thu May 30 06:51:03 2013] Got source and background scale factors 1093013.000000, 8915377.000000
[Thu May 30 06:51:03 2013] User source parameters:
  Position = (148.5, 290.9) = 17 44 37.64 -28 59 32.2
  Extent = 10.2 (7.6-15.2)", rotation angle = 0
  Source aperture counts = 39.1 +/- 11.1
  Background aperture counts = 61.9
  Rate = 0.008 +/- 0.002

[Thu May 30 06:51:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 06:51:05 2013] Using photon index=1.80, rate=0.0108, arf fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3.arf
[Thu May 30 06:51:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 06:51:05 2013] Updating source flux to 1.2e-13
[Thu May 30 06:51:12 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 06:51:13 2013] xmm0511000901/analysis//spectral/fullrun_pn_xmm0511000901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete