[Wed May 29 11:33:19 2013] Detection parameters:
  Position = (343.6, 203.2) = 17 44 41.10 -28 47 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.6 +/- 8.3
  Background counts = 10.4
  Rate = 0.01 +/- 0.003

[Wed May 29 11:33:19 2013] Off-axis axis estimate = 7.65'
[Wed May 29 11:34:27 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:34:27 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Wed May 29 11:34:27 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.103
[Wed May 29 11:34:27 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.25"
[Wed May 29 11:38:17 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 29 11:38:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_src3.csv
[Wed May 29 11:38:17 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 29 11:38:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_src3.csv
[Wed May 29 11:38:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:38:17 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 29 11:38:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 29 11:38:17 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 29 11:38:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 29 11:38:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:46:56 2013] Source 3 is offset by -7.466918 and -6.463217 pixels which is larger than
2 X fitted extent = 1.178336 x 1.178336, not incorporating fit results
[Wed May 29 11:46:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:46:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:46:56 2013] Assessing source extent using major
[Wed May 29 11:46:56 2013] Source does appear to be extended
[Wed May 29 11:46:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:47:01 2013] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:47:01 2013] Initial guess for spatial extent in simple fitting = 10.25"
[Wed May 29 11:47:01 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.103
[Wed May 29 11:47:01 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.25"
[Wed May 29 11:52:12 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 29 11:52:12 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 29 11:52:12 2013] Fit fullrun_pn_xmm0511000801_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed May 29 11:52:12 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 29 11:52:12 2013] fullrun_pn_xmm0511000801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 29 11:52:12 2013] Fit fullrun_pn_xmm0511000801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 29 12:00:21 2013] Spatial fit model total counts = 159.218000, observed total counts = 152.000000
[Wed May 29 12:00:21 2013] Offset between fit and detection position for source 3 = 0.406166 pixels
[Wed May 29 12:00:21 2013] 159.995000 total counts/ 139.112000 bgd. counts: snr = 1.770560
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.406166 pixels
  Position = (344.0, 203.1) = 17 44 40.97 -28 47 24.8
  Extent = 4.6 (3.1-6.8)", rotation angle = 0
  Source counts = 20.9 +/- 12.6
  Background counts = 139.1
  Rate = 0.004 +/- 0.003
[Wed May 29 12:00:21 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:00:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:00:21 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:00:21 2013] Source does appear to be extended
[Wed May 29 12:00:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:00:26 2013] XMMSAS src. selection expression = ellipse(29883.734000, 17622.400800, 278.806808, 278.806808, 0.000000, X, Y)
[Wed May 29 12:00:26 2013] Writing source region out to fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3_src.reg
[Wed May 29 12:00:26 2013] Extracting stamp from image fullrun_pn_xmm0511000801_pi300-10000_cl_sm2.00.img.gz, (328, 187) - (360, 219)
[Wed May 29 12:00:26 2013] XMMSAS bgd. selection expression = annulus(29883.734000, 17622.400800, 464.678013, 929.356027, X, Y)
[Wed May 29 12:00:26 2013] Writing fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3.gif
[Wed May 29 12:01:29 2013] Mean detx,y = (2553.11, 9929.11) 
[Wed May 29 12:01:31 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:01:50 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:01:50 2013] Setting source spectrum file to fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 29 12:01:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 29 12:02:08 2013] Not generating rmf since there are only 20 counts
[Wed May 29 12:02:08 2013] rmf not generated due to insufficient counts
[Wed May 29 12:04:29 2013] Updating aperture counts using extracted products
[Wed May 29 12:04:29 2013] Total counts from fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 36.00
[Wed May 29 12:04:29 2013] Total counts from fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3_bgd.pi.gz = 110.00
[Wed May 29 12:04:29 2013] Got source and background scale factors 233932.000000, 1686272.000000
[Wed May 29 12:04:29 2013] User source parameters:
  Position = (344.0, 203.1) = 17 44 40.97 -28 47 24.8
  Extent = 4.6 (3.1-6.8)", rotation angle = 0
  Source aperture counts = 20.7 +/- 7.1
  Background aperture counts = 15.3
  Rate = 0.004 +/- 0.001

[Wed May 29 12:04:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 12:04:29 2013] Using photon index=1.80, rate=0.00415, arf fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3.arf
[Wed May 29 12:04:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 12:04:29 2013] Updating source flux to 6.6e-14
[Wed May 29 12:04:32 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed May 29 12:04:32 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 12:04:33 2013] xmm0511000801/analysis//spectral/fullrun_pn_xmm0511000801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete