[Thu Jun 13 12:45:55 2013] Detection parameters:
  Position = (302.2, 317.1) = 17 45 43.06 -29 0 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 599.6 +/- 32.7
  Background counts = 43.1
  Rate = 0.1 +/- 0.008

[Thu Jun 13 12:45:55 2013] Off-axis axis estimate = 1.38'
[Thu Jun 13 12:47:12 2013] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 12:47:12 2013] Initial guess for spatial extent in simple fitting = 7.12"
[Thu Jun 13 12:47:12 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.876
[Thu Jun 13 12:47:12 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.12"
[Thu Jun 13 13:37:04 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 13 13:37:04 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 13 13:37:04 2013] Fit fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Jun 13 13:37:04 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 13 13:37:04 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 13 13:37:04 2013] Fit fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 13 14:28:34 2013] Spatial fit model total counts = 2946.480000, observed total counts = 2942.000000
[Thu Jun 13 14:28:34 2013] Offset between fit and detection position for source 2 = 4.311122 pixels
[Thu Jun 13 14:28:34 2013] 2997.052000 total counts/ 2346.320000 bgd. counts: snr = 13.434099
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.311122 pixels
  Position = (298.7, 319.6) = 17 45 44.22 -29 0 4.3
  Extent = 14.2 (14.2-28.5)", rotation angle = 0
  Source counts = 650.7 +/- 54.7
  Background counts = 2346.3
  Rate = 0.1 +/- 0.01
[Thu Jun 13 14:28:34 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:28:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:28:34 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 14:28:34 2013] Source does appear to be extended
[Thu Jun 13 14:28:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 14:28:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:28:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 14:28:45 2013] Initial guess for spatial extent in simple fitting = 14.24"
[Thu Jun 13 14:28:45 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.984
[Thu Jun 13 14:28:45 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 14.24"
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 15:19:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 13 15:19:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:06:53 2013] Warning, spatial fit 2 centroid is now closest to src. 10
[Thu Jun 13 16:06:53 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:06:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:06:53 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:06:53 2013] Source does appear to be extended
[Thu Jun 13 16:06:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:07:01 2013] XMMSAS src. selection expression = ellipse(25941.552000, 27758.739600, 854.226025, 854.226025, 0.000000, X, Y)
[Thu Jun 13 16:07:01 2013] Writing source region out to fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 16:07:01 2013] Extracting stamp from image fullrun_pn_xmm0511000401_pi300-10000_cl_sm2.00.img.gz, (250, 271) - (348, 369)
[Thu Jun 13 16:07:01 2013] XMMSAS bgd. selection expression = annulus(25941.552000, 27758.739600, 1423.710041, 2847.420082, X, Y) && !ellipse(26921.946000, 27202.224000, 1083.448031, 1083.448031, 0.000000, X, Y) && !ellipse(25633.949560, 29641.480400, 531.756015, 268.255208, 346.692300, X, Y) && !ellipse(26537.351776, 29272.918732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.133392, 29003.855408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29055.572723, 28171.665680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28400.863739, 28090.241241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.781120, 27342.352220, 878.200025, 333.200010, 33.382400, X, Y) && !ellipse(26391.006561, 26587.399078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28225.089206, 26147.915800, 761.836822, 339.246410, 69.957100, X, Y) && !ellipse(27536.818970, 25965.623077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.564270, 25446.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.561829, 25711.194275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28485.200745, 25367.715790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26625.300000, 25244.962000, 1108.280032, 412.058412, 133.778000, X, Y)
[Thu Jun 13 16:07:01 2013] Writing fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 16:07:29 2013] Mean detx,y = (-884.50, -280.21) 
[Thu Jun 13 16:07:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:07:54 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:07:54 2013] Setting source spectrum file to fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 16:07:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 17:08:21 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:08:21 2013] Total counts from fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2833.00
[Thu Jun 13 17:08:21 2013] Total counts from fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 2069.00
[Thu Jun 13 17:08:21 2013] Got source and background scale factors 2108976.000000, 8028064.000000
[Thu Jun 13 17:08:21 2013] User source parameters:
  Position = (298.7, 319.6) = 17 45 44.22 -29 0 4.3
  Extent = 14.2 (14.2-28.5)", rotation angle = 0
  Source aperture counts = 2289.5 +/- 54.2
  Background aperture counts = 543.5
  Rate = 0.5 +/- 0.01

[Thu Jun 13 17:08:25 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:08:25 2013] Using photon index=1.80, rate=0.129, arf fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:08:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:08:25 2013] Updating source flux to 7.5e-13
[Thu Jun 13 17:08:36 2013] xmm0511000401/analysis//spectral/fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete