[Thu Jun 13 12:45:55 2013] Detection parameters:
  Position = (294.1, 333.9) = 17 45 45.75 -28 59 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.7 +/- 19.6
  Background counts = 42.0
  Rate = 0.05 +/- 0.005

[Thu Jun 13 12:45:55 2013] Off-axis axis estimate = 2.59'
[Thu Jun 13 12:47:12 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 12:47:12 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Jun 13 12:47:12 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Thu Jun 13 12:47:12 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.72"
[Thu Jun 13 13:37:04 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jun 13 13:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src10.csv
[Thu Jun 13 13:37:04 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jun 13 13:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src10.csv
[Thu Jun 13 13:37:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:37:05 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jun 13 13:37:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Jun 13 13:37:05 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jun 13 13:37:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Jun 13 13:37:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:34 2013] Spatial fit model total counts = 1003.470000, observed total counts = 894.000000
[Thu Jun 13 14:28:34 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 14:28:34 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:28:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:28:34 2013] Assessing source extent using major
[Thu Jun 13 14:28:34 2013] Source does appear to be extended
[Thu Jun 13 14:28:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 14:28:34 2013] Source is confused with source 7
[Thu Jun 13 14:28:45 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:28:45 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Jun 13 14:28:45 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Thu Jun 13 14:28:45 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.72"
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src8.csv
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src8.csv
[Thu Jun 13 15:19:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jun 13 15:19:42 2013] fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun 13 15:19:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jun 13 15:19:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:06:53 2013] Source 10 is offset by -4.136205 and 4.485740 pixels which is larger than
2 X fitted extent = 1.636446 x 1.636446, not incorporating fit results
[Thu Jun 13 16:06:53 2013] Source 10 is offset by 7.225533 and 6.038430 pixels which is larger than
2 X fitted extent = 0.887913 x 0.887913, not incorporating fit results
[Thu Jun 13 16:06:53 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:06:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:06:53 2013] Assessing source extent using major
[Thu Jun 13 16:06:53 2013] Source does appear to be extended
[Thu Jun 13 16:06:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:07:01 2013] XMMSAS src. selection expression = ellipse(25540.133392, 29003.855408, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:07:01 2013] Writing source region out to fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 13 16:07:01 2013] Extracting stamp from image fullrun_pn_xmm0511000401_pi300-10000_cl_sm2.00.img.gz, (257, 296) - (332, 371)
[Thu Jun 13 16:07:01 2013] XMMSAS bgd. selection expression = annulus(25540.133392, 29003.855408, 1087.500000, 2175.000000, X, Y) && !ellipse(26921.946000, 27202.224000, 1083.448031, 1083.448031, 0.000000, X, Y) && !ellipse(25941.552000, 27758.739600, 1138.968033, 1138.968033, 0.000000, X, Y) && !ellipse(28098.208984, 31862.867950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.949560, 29641.480400, 531.756015, 268.255208, 346.692300, X, Y) && !ellipse(26537.351776, 29272.918732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28400.863739, 28090.241241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.781120, 27342.352220, 878.200025, 333.200010, 33.382400, X, Y) && !ellipse(26391.006561, 26587.399078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28225.089206, 26147.915800, 761.836822, 339.246410, 69.957100, X, Y) && !ellipse(27536.818970, 25965.623077, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:07:01 2013] Writing fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10.gif
[Thu Jun 13 16:09:53 2013] Mean detx,y = (-1297.06, -1719.38) 
[Thu Jun 13 16:09:56 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:10:25 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:10:25 2013] Setting source spectrum file to fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 13 16:10:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 13 16:32:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 16:32:32 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:08:22 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:08:22 2013] Total counts from fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 687.00
[Thu Jun 13 17:08:22 2013] Total counts from fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1103.00
[Thu Jun 13 17:08:22 2013] Got source and background scale factors 1171912.000000, 4575684.000000
[Thu Jun 13 17:08:22 2013] User source parameters:
  Position = (294.1, 333.9) = 17 45 45.75 -28 59 2.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 404.5 +/- 27.2
  Background aperture counts = 282.5
  Rate = 0.08 +/- 0.005

[Thu Jun 13 17:08:22 2013] Updating counts from extracted products
[Thu Jun 13 17:08:22 2013] Set source signif. to 404.50/16.81 = 24.07
[Thu Jun 13 17:08:25 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:08:25 2013] Using photon index=1.80, rate=0.08, arf fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10.arf
[Thu Jun 13 17:08:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:08:25 2013] Updating source flux to 5.7e-13
[Thu Jun 13 17:08:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:08:36 2013] xmm0511000401/analysis//spectral/fullrun_pn_xmm0511000401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete