[Thu Jun 13 12:46:28 2013] Detection parameters:
  Position = (294.5, 309.0) = 17 45 45.62 -29 0 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.0 +/- 11.3
  Background counts = 16.4
  Rate = 0.01 +/- 0.003

[Thu Jun 13 12:46:28 2013] Off-axis axis estimate = 0.82'
[Thu Jun 13 14:05:33 2013] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:05:33 2013] Initial guess for spatial extent in simple fitting = 6.84"
[Thu Jun 13 14:05:33 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.165
[Thu Jun 13 14:05:33 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 6.84"
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src9.csv
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src9.csv
[Thu Jun 13 14:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 13 14:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:38 2013] Warning, spatial fit 9 centroid is now closest to src. 2
[Thu Jun 13 14:28:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:28:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:28:38 2013] Assessing source extent using major
[Thu Jun 13 14:28:38 2013] Source does appear to be extended
[Thu Jun 13 14:28:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:37:59 2013] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 15:37:59 2013] Initial guess for spatial extent in simple fitting = 6.84"
[Thu Jun 13 15:37:59 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.165
[Thu Jun 13 15:37:59 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 6.84"
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun 13 16:06:48 2013] Fit fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src8 appears to have run properly
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun 13 16:06:48 2013] Fit fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jun 13 16:06:56 2013] Spatial fit model total counts = 365.859000, observed total counts = 382.000000
[Thu Jun 13 16:06:56 2013] Offset between fit and detection position for source 9 = 5.849240 pixels
[Thu Jun 13 16:06:56 2013] 408.247000 total counts/ 303.454000 bgd. counts: snr = 6.015695
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 5.849240 pixels
  Position = (291.4, 304.0) = 17 45 46.64 -29 1 12.2
  Extent = 13.5 (13.5-13.5)", rotation angle = 0
  Source counts = 104.8 +/- 20.2
  Background counts = 303.5
  Rate = 0.02 +/- 0.005
[Thu Jun 13 16:06:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:06:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:06:56 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:06:56 2013] Source does appear to be extended
[Thu Jun 13 16:06:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:53:07 2013] XMMSAS src. selection expression = ellipse(25306.970000, 26402.252000, 810.984023, 810.984023, 0.000000, X, Y)
[Thu Jun 13 16:53:07 2013] Writing source region out to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 13 16:53:07 2013] Extracting stamp from image fullrun_mos2_xmm0511000401_pi300-10000_cl_sm2.00.img.gz, (245, 257) - (338, 351)
[Thu Jun 13 16:53:07 2013] XMMSAS bgd. selection expression = annulus(25306.970000, 26402.252000, 1351.640039, 2703.280078, X, Y) && !ellipse(26794.934000, 27338.532000, 1144.984033, 1144.984033, 0.000000, X, Y) && !ellipse(26335.959839, 27610.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.398800, 27909.194800, 1152.896033, 1152.896033, 0.000000, X, Y) && !ellipse(27939.326721, 27345.210815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28218.041077, 26145.530518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.703217, 28236.974091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.002777, 25657.833496, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:53:07 2013] Writing fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9.gif
[Thu Jun 13 16:53:57 2013] Mean detx,y = (1678.73, -1044.67) 
[Thu Jun 13 16:53:58 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:54:06 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:54:07 2013] Setting source spectrum file to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 13 16:54:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 13 17:08:27 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:08:27 2013] Total counts from fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 235.00
[Thu Jun 13 17:08:27 2013] Total counts from fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 959.00
[Thu Jun 13 17:08:27 2013] Got source and background scale factors 2068800.000000, 11293164.000000
[Thu Jun 13 17:08:27 2013] User source parameters:
  Position = (291.4, 304.0) = 17 45 46.64 -29 1 12.2
  Extent = 13.5 (13.5-13.5)", rotation angle = 0
  Source aperture counts = 59.3 +/- 16.4
  Background aperture counts = 175.7
  Rate = 0.01 +/- 0.004

[Thu Jun 13 17:08:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:08:27 2013] Using photon index=1.80, rate=0.0241, arf fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9.arf
[Thu Jun 13 17:08:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:08:27 2013] Updating source flux to 4.4e-13
[Thu Jun 13 17:08:33 2013] xmm0511000401/analysis//spectral/fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete