[Thu Jun 13 12:46:28 2013] Detection parameters:
  Position = (321.7, 314.9) = 17 45 36.60 -29 0 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.5 +/- 11.7
  Background counts = 15.1
  Rate = 0.02 +/- 0.003

[Thu Jun 13 12:46:28 2013] Off-axis axis estimate = 2.06'
[Thu Jun 13 14:05:33 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:05:33 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Thu Jun 13 14:05:33 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.662
[Thu Jun 13 14:05:33 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.46"
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 14:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 14:28:28 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 13 14:28:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 14:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:28:38 2013] Source 8 is offset by 4.090261 and 5.479136 pixels which is larger than
2 X fitted extent = 0.826115 x 0.826115, not incorporating fit results
[Thu Jun 13 14:28:38 2013] Source 8 is offset by 7.559870 and 3.019090 pixels which is larger than
2 X fitted extent = 6.860736 x 6.860736, not incorporating fit results
[Thu Jun 13 14:28:38 2013] Source 8 is offset by 4.113847 and -5.781439 pixels which is larger than
2 X fitted extent = 2.172023 x 2.172023, not incorporating fit results
[Thu Jun 13 14:28:38 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 14:28:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 14:28:38 2013] Assessing source extent using major
[Thu Jun 13 14:28:38 2013] Source does appear to be extended
[Thu Jun 13 14:28:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 15:37:59 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 15:37:59 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Thu Jun 13 15:37:59 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.662
[Thu Jun 13 15:37:59 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.46"
[Thu Jun 13 16:06:47 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jun 13 16:06:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src4.csv
[Thu Jun 13 16:06:47 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jun 13 16:06:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src4.csv
[Thu Jun 13 16:06:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jun 13 16:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 13 16:06:48 2013] fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jun 13 16:06:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jun 13 16:06:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511000401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:06:56 2013] Source 8 is offset by 7.559870 and 4.293021 pixels which is larger than
2 X fitted extent = 6.860736 x 6.860736, not incorporating fit results
[Thu Jun 13 16:06:56 2013] Source 8 is offset by 4.127916 and -5.691094 pixels which is larger than
2 X fitted extent = 2.176864 x 2.176864, not incorporating fit results
[Thu Jun 13 16:06:56 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:06:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:06:56 2013] Assessing source extent using major
[Thu Jun 13 16:06:56 2013] Source does appear to be extended
[Thu Jun 13 16:06:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:53:07 2013] XMMSAS src. selection expression = ellipse(27939.326721, 27345.210815, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:53:07 2013] Writing source region out to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8_src.reg
[Thu Jun 13 16:53:07 2013] Extracting stamp from image fullrun_mos2_xmm0511000401_pi300-10000_cl_sm2.00.img.gz, (284, 277) - (359, 352)
[Thu Jun 13 16:53:07 2013] XMMSAS bgd. selection expression = annulus(27939.326721, 27345.210815, 1087.500000, 2175.000000, X, Y) && !ellipse(26794.934000, 27338.532000, 1144.984033, 1144.984033, 0.000000, X, Y) && !ellipse(26335.959839, 27610.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.398800, 27909.194800, 1152.896033, 1152.896033, 0.000000, X, Y) && !ellipse(28218.041077, 26145.530518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.970000, 26402.252000, 1081.312031, 1081.312031, 0.000000, X, Y) && !ellipse(28177.703217, 28236.974091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.002777, 25657.833496, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:53:07 2013] Writing fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8.gif
[Thu Jun 13 16:53:38 2013] Mean detx,y = (-825.52, -270.12) 
[Thu Jun 13 16:53:39 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:53:46 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:53:46 2013] Setting source spectrum file to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jun 13 16:53:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jun 13 17:03:46 2013] Not generating rmf since there are only 69 counts
[Thu Jun 13 17:03:46 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:08:27 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:08:27 2013] Total counts from fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 282.00
[Thu Jun 13 17:08:27 2013] Total counts from fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8_bgd.pi.gz = 522.00
[Thu Jun 13 17:08:27 2013] Got source and background scale factors 1170540.000000, 4906616.000000
[Thu Jun 13 17:08:27 2013] User source parameters:
  Position = (321.7, 314.9) = 17 45 36.60 -29 0 26.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 157.5 +/- 17.8
  Background aperture counts = 124.5
  Rate = 0.04 +/- 0.004

[Thu Jun 13 17:08:27 2013] Updating counts from extracted products
[Thu Jun 13 17:08:27 2013] Set source signif. to 157.47/11.16 = 14.11
[Thu Jun 13 17:08:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:08:27 2013] Using photon index=1.80, rate=0.0363, arf fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8.arf
[Thu Jun 13 17:08:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:08:27 2013] Updating source flux to 6.1e-13
[Thu Jun 13 17:08:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:08:33 2013] xmm0511000401/analysis//spectral/fullrun_mos2_xmm0511000401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete